[Sat Jun 22 05:37:54 2013] Detection parameters:
  Position = (254.5, 198.1) = 1 53 2.01 -14 5 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 12.4
  Background counts = 13.3
  Rate = 0.003 +/- 0.0004

[Sat Jun 22 05:37:54 2013] Off-axis axis estimate = 7.94'
[Sat Jun 22 05:38:59 2013] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:38:59 2013] Initial guess for spatial extent in simple fitting = 10.40"
[Sat Jun 22 05:38:59 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.897
[Sat Jun 22 05:38:59 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 10.40"
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src16.csv
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src16.csv
[Sat Jun 22 05:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:02 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jun 22 05:39:02 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jun 22 05:39:02 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sat Jun 22 05:39:56 2013] Warning, spatial fit 16 centroid is now closest to src. 66
[Sat Jun 22 05:39:56 2013] Source 71 is offset by -2.922724 and -1.644787 pixels which is larger than
2 X fitted extent = 1.216253 x 1.216253, not incorporating fit results
[Sat Jun 22 05:39:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:39:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:39:56 2013] Assessing source extent using major
[Sat Jun 22 05:39:56 2013] Source does appear to be extended
[Sat Jun 22 05:39:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:54 2013] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:54 2013] Initial guess for spatial extent in simple fitting = 10.40"
[Sat Jun 22 05:40:54 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.897
[Sat Jun 22 05:40:54 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 10.40"
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src16.ximg exists
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Jun 22 05:40:55 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src16 appears to have run properly
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Jun 22 05:40:56 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Jun 22 05:41:50 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 13.893924 pixels away
[Sat Jun 22 05:41:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:41:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:41:50 2013] Assessing source extent using major
[Sat Jun 22 05:41:50 2013] Source does appear to be extended
[Sat Jun 22 05:41:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:43:34 2013] XMMSAS src. selection expression = ellipse(22090.494980, 17182.625534, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 05:43:34 2013] Not overwriting source region fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src71_src.reg
[Sat Jun 22 05:43:34 2013] Extracting stamp from image fullrun_mos1_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (217, 161) - (292, 236)
[Sat Jun 22 05:43:34 2013] XMMSAS bgd. selection expression = annulus(22090.494980, 17182.625534, 1087.500000, 2175.000000, X, Y) && !ellipse(23046.084400, 18794.769400, 389.663211, 389.663211, 0.000000, X, Y) && !ellipse(23360.362000, 16106.642000, 1693.024049, 1693.024049, 0.000000, X, Y) && !ellipse(22977.549561, 16391.531677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20849.248871, 16214.704071, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 05:43:34 2013] Writing fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src71.gif
[Sat Jun 22 05:49:04 2013] Mean detx,y = (-10849.15, -252.54) 
[Sat Jun 22 05:49:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 05:49:19 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 05:49:19 2013] Setting source spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sat Jun 22 05:49:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sat Jun 22 06:57:10 2013] Not generating rmf since there are only 87 counts
[Sat Jun 22 06:57:10 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:47:44 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:47:44 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 162.00
[Sat Jun 22 08:47:44 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src71_bgd.pi.gz = 395.00
[Sat Jun 22 08:47:44 2013] Got source and background scale factors 1336000.000000, 5164976.000000
[Sat Jun 22 08:47:44 2013] User source parameters:
  Position = (254.5, 198.1) = 1 53 2.01 -14 5 57.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 59.8 +/- 13.8
  Background aperture counts = 102.2
  Rate = 0.001 +/- 0.0003

[Sat Jun 22 08:47:44 2013] Updating counts from extracted products
[Sat Jun 22 08:47:44 2013] Set source signif. to 59.83/10.11 = 5.92
[Sat Jun 22 08:48:05 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:05 2013] Using photon index=1.80, rate=0.00112, arf fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src71.arf
[Sat Jun 22 08:48:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:05 2013] Updating source flux to 2.1e-14
[Sat Jun 22 08:48:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:48:54 2013] xmm0109540101/analysis//spectral/fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete