[Sat Jun 22 05:37:53 2013] Detection parameters:
  Position = (312.0, 228.5) = 1 52 44.81 -14 3 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.7 +/- 8.7
  Background counts = 14.2
  Rate = 0.001 +/- 0.0002

[Sat Jun 22 05:37:54 2013] Off-axis axis estimate = 5.16'
[Sat Jun 22 05:38:59 2013] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:38:59 2013] Initial guess for spatial extent in simple fitting = 9.01"
[Sat Jun 22 05:38:59 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.135
[Sat Jun 22 05:38:59 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 9.01"
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src67.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src67.csv
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src67.csv
[Sat Jun 22 05:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:03 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sat Jun 22 05:39:03 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sat Jun 22 05:39:03 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Sat Jun 22 05:39:56 2013] Spatial fit model total counts = 184.185000, observed total counts = 171.000000
[Sat Jun 22 05:39:56 2013] Offset between fit and detection position for source 61 = 3.310070 pixels
[Sat Jun 22 05:39:56 2013] 167.157400 total counts/ 58.439400 bgd. counts: snr = 14.221604
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 3.310070 pixels
  Position = (315.2, 227.8) = 1 52 43.85 -14 3 48.4
  Extent = 18.0 (18.0-36.0)", rotation angle = 0
  Source counts = 108.7 +/- 12.9
  Background counts = 58.4
  Rate = 0.002 +/- 0.0002
[Sat Jun 22 05:39:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:39:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:39:56 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:39:56 2013] Source does appear to be extended
[Sat Jun 22 05:39:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:39:56 2013] Source is confused with source 62
[Sat Jun 22 05:40:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 05:40:54 2013] Initial guess for spatial extent in simple fitting = 18.02"
[Sat Jun 22 05:40:54 2013] source mask rpix=4.1, npix_max = 86, mask sum = 72, frac = 0.835
[Sat Jun 22 05:40:54 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 18.02"
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src65.ximg exists
[Sat Jun 22 05:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src65.csv
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src65_1.ximg exists
[Sat Jun 22 05:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src65.csv
[Sat Jun 22 05:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Sat Jun 22 05:40:56 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Sat Jun 22 05:41:50 2013] Warning, spatial fit 65 centroid is now closest to src. 62
[Sat Jun 22 05:41:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:41:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:41:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:41:50 2013] Source does appear to be extended
[Sat Jun 22 05:41:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:43:35 2013] XMMSAS src. selection expression = ellipse(27377.022000, 19774.188400, 1081.122031, 1081.122031, 0.000000, X, Y)
[Sat Jun 22 05:43:35 2013] Not overwriting source region fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src61_src.reg
[Sat Jun 22 05:43:35 2013] Extracting stamp from image fullrun_mos1_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (253, 166) - (377, 290)
[Sat Jun 22 05:43:35 2013] XMMSAS bgd. selection expression = annulus(27377.022000, 19774.188400, 1801.870052, 3603.740104, X, Y) && !ellipse(28200.396000, 19535.028000, 362.018410, 362.018410, 0.000000, X, Y) && !ellipse(30009.686400, 21803.524400, 265.053608, 265.053608, 0.000000, X, Y) && !ellipse(29826.964935, 19987.001556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.256400, 19427.660000, 364.578410, 364.578410, 0.000000, X, Y) && !ellipse(31707.702728, 17321.717209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28127.220920, 21832.181800, 292.535208, 292.535208, 0.000000, X, Y) && !ellipse(23360.362000, 16106.642000, 1693.024049, 1693.024049, 0.000000, X, Y) && !ellipse(22977.549561, 16391.531677, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 05:43:35 2013] Writing fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src61.gif
[Sat Jun 22 06:12:21 2013] Mean detx,y = (-5911.39, 3128.26) 
[Sat Jun 22 06:12:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 06:13:16 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 06:13:16 2013] Setting source spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Jun 22 06:13:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sat Jun 22 08:48:01 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:02 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 379.00
[Sat Jun 22 08:48:02 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src61_bgd.pi.gz = 1823.00
[Sat Jun 22 08:48:02 2013] Got source and background scale factors 3272299.000000, 26033892.000000
[Sat Jun 22 08:48:02 2013] User source parameters:
  Position = (315.2, 227.8) = 1 52 43.85 -14 3 48.4
  Extent = 18.0 (18.0-36.0)", rotation angle = 0
  Source aperture counts = 149.9 +/- 20.5
  Background aperture counts = 229.1
  Rate = 0.003 +/- 0.0004

[Sat Jun 22 08:48:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:08 2013] Using photon index=1.80, rate=0.00203, arf fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src61.arf
[Sat Jun 22 08:48:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:08 2013] Updating source flux to 2.5e-14
[Sat Jun 22 08:48:33 2013] Flag c found in src. 61 procflags, skipping spectral fitting
[Sat Jun 22 08:48:54 2013] xmm0109540101/analysis//spectral/fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete