[Sat Jun 22 05:37:51 2013] Detection parameters:
  Position = (288.5, 306.8) = 1 52 51.85 -13 58 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.5 +/- 9.8
  Background counts = 15.1
  Rate = 0.0007 +/- 0.0002

[Sat Jun 22 05:37:54 2013] Off-axis axis estimate = 0.94'
[Sat Jun 22 05:38:59 2013] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:38:59 2013] Initial guess for spatial extent in simple fitting = 6.90"
[Sat Jun 22 05:38:59 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.149
[Sat Jun 22 05:38:59 2013] Giving source the simple spatial ID 74 for pass 0, mean size = 6.90"
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src74.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src74.csv
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src74_1.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src74.csv
[Sat Jun 22 05:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:03 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sat Jun 22 05:39:03 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sat Jun 22 05:39:03 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Sat Jun 22 05:39:56 2013] Spatial fit model total counts = 219.967000, observed total counts = 220.000000
[Sat Jun 22 05:39:56 2013] Offset between fit and detection position for source 43 = 0.682553 pixels
[Sat Jun 22 05:39:56 2013] 219.642400 total counts/ 192.699000 bgd. counts: snr = 1.940942
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.682553 pixels
  Position = (289.2, 306.8) = 1 52 51.64 -13 58 4.9
  Extent = 7.2 (4.6-13.8)", rotation angle = 0
  Source counts = 26.9 +/- 14.8
  Background counts = 192.7
  Rate = 0.0005 +/- 0.0003
[Sat Jun 22 05:39:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:39:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:39:56 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:39:56 2013] Source does appear to be extended
[Sat Jun 22 05:39:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:54 2013] Initial guess for spatial extent in simple fitting = 7.15"
[Sat Jun 22 05:40:54 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.870
[Sat Jun 22 05:40:54 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 7.15"
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src72.ximg exists
[Sat Jun 22 05:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src72.csv
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src72_1.ximg exists
[Sat Jun 22 05:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src72.csv
[Sat Jun 22 05:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:57 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sat Jun 22 05:40:57 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sat Jun 22 05:40:57 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Sat Jun 22 05:41:50 2013] Spatial fit model total counts = 229.976000, observed total counts = 230.000000
[Sat Jun 22 05:41:50 2013] Offset between fit and detection position for source 43 = 0.049168 pixels
[Sat Jun 22 05:41:50 2013] 229.678900 total counts/ 203.133000 bgd. counts: snr = 1.862547
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.049168 pixels
  Position = (289.1, 306.8) = 1 52 51.65 -13 58 4.7
  Extent = 7.1 (4.6-14.3)", rotation angle = 0
  Source counts = 26.5 +/- 15.2
  Background counts = 203.1
  Rate = 0.0005 +/- 0.0003
[Sat Jun 22 05:41:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:41:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:41:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:41:50 2013] Source does appear to be extended
[Sat Jun 22 05:41:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:43:35 2013] XMMSAS src. selection expression = ellipse(25104.883620, 26646.946120, 424.264212, 424.264212, 0.000000, X, Y)
[Sat Jun 22 05:43:35 2013] Not overwriting source region fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src43_src.reg
[Sat Jun 22 05:43:35 2013] Extracting stamp from image fullrun_mos1_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (265, 282) - (314, 331)
[Sat Jun 22 05:43:35 2013] XMMSAS bgd. selection expression = annulus(25104.883620, 26646.946120, 707.107020, 1414.214041, X, Y) && !ellipse(27379.413600, 27489.189800, 952.656027, 952.656027, 0.000000, X, Y)
[Sat Jun 22 05:43:35 2013] Writing fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src43.gif
[Sat Jun 22 06:15:59 2013] Mean detx,y = (-1186.21, -2426.37) 
[Sat Jun 22 06:16:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 06:16:11 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 06:16:11 2013] Setting source spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jun 22 06:16:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Jun 22 07:31:22 2013] Not generating rmf since there are only 26 counts
[Sat Jun 22 07:31:22 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:03 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:03 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 81.00
[Sat Jun 22 08:48:04 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src43_bgd.pi.gz = 433.00
[Sat Jun 22 08:48:04 2013] Got source and background scale factors 563200.000000, 4705600.000000
[Sat Jun 22 08:48:04 2013] User source parameters:
  Position = (289.1, 306.8) = 1 52 51.65 -13 58 4.7
  Extent = 7.1 (4.6-14.3)", rotation angle = 0
  Source aperture counts = 29.2 +/- 10.0
  Background aperture counts = 51.8
  Rate = 0.0005 +/- 0.0002

[Sat Jun 22 08:48:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:08 2013] Using photon index=1.80, rate=0.000496, arf fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src43.arf
[Sat Jun 22 08:48:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:08 2013] Updating source flux to 5.9e-15
[Sat Jun 22 08:48:33 2013] Source 43 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 08:48:54 2013] xmm0109540101/analysis//spectral/fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete