[Sat Jun 22 05:37:48 2013] Detection parameters:
  Position = (251.4, 461.0) = 1 53 2.90 -13 46 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.8 +/- 17.3
  Background counts = 15.8
  Rate = 0.003 +/- 0.0003

[Sat Jun 22 05:37:54 2013] Off-axis axis estimate = 12.27'
[Sat Jun 22 05:38:59 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:38:59 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Jun 22 05:38:59 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Sat Jun 22 05:38:59 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 12.56"
[Sat Jun 22 05:39:00 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 22 05:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 22 05:39:00 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 22 05:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 22 05:39:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:02 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 22 05:39:02 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 22 05:39:02 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jun 22 05:39:56 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.962453 pixels away
[Sat Jun 22 05:39:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:39:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:39:56 2013] Assessing source extent using major
[Sat Jun 22 05:39:56 2013] Source does appear to be extended
[Sat Jun 22 05:39:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:39:56 2013] Source is confused with source 2
[Sat Jun 22 05:40:54 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:54 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Sat Jun 22 05:40:54 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Sat Jun 22 05:40:54 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 12.56"
[Sat Jun 22 05:40:54 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 22 05:40:54 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 22 05:40:54 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src11 appears to have run properly
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 22 05:40:56 2013] Fit fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Jun 22 05:41:50 2013] Spatial fit model total counts = 401.602000, observed total counts = 404.000000
[Sat Jun 22 05:41:50 2013] Offset between fit and detection position for source 3 = 0.130409 pixels
[Sat Jun 22 05:41:50 2013] 388.669000 total counts/ 262.502000 bgd. counts: snr = 7.787167
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.130409 pixels
  Position = (251.3, 460.9) = 1 53 2.94 -13 46 54.4
  Extent = 8.6" x 4.3", rotation angle = 323
  Source counts = 126.2 +/- 19.7
  Background counts = 262.5
  Rate = 0.002 +/- 0.0004
[Sat Jun 22 05:41:50 2013] Spatial fit model total counts = 415.625000, observed total counts = 417.000000
[Sat Jun 22 05:41:50 2013] Offset between fit and detection position for source 3 = 0.120580 pixels
[Sat Jun 22 05:41:50 2013] Warning, changing simple spatial fit ID from 11 to 37
[Sat Jun 22 05:41:50 2013] 408.536300 total counts/ 317.247000 bgd. counts: snr = 5.125322
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.120580 pixels
  Position = (251.4, 461.0) = 1 53 2.92 -13 46 54.0
  Extent = 4.4 (3.5-5.5)", rotation angle = 0
  Source counts = 91.3 +/- 20.2
  Background counts = 317.2
  Rate = 0.002 +/- 0.0004
[Sat Jun 22 05:41:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:41:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:41:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:41:50 2013] Source does appear to be extended
[Sat Jun 22 05:41:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:43:34 2013] XMMSAS src. selection expression = ellipse(21821.238000, 40061.950000, 266.854208, 266.854208, 0.000000, X, Y)
[Sat Jun 22 05:43:34 2013] Not overwriting source region fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 22 05:43:34 2013] Extracting stamp from image fullrun_mos1_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (236, 446) - (267, 476)
[Sat Jun 22 05:43:34 2013] XMMSAS bgd. selection expression = annulus(21821.238000, 40061.950000, 444.757013, 889.514026, X, Y) && !ellipse(22174.987305, 40496.832062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20807.960510, 41582.149628, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 05:43:34 2013] Writing fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src3.gif
[Sat Jun 22 05:46:32 2013] Mean detx,y = (8779.76, -11999.92) 
[Sat Jun 22 05:46:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 05:46:45 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 05:46:46 2013] Setting source spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 22 05:46:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 22 06:47:15 2013] Not generating rmf since there are only 91 counts
[Sat Jun 22 06:47:15 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:47:42 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:47:42 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 131.00
[Sat Jun 22 08:47:42 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 74.00
[Sat Jun 22 08:47:42 2013] Got source and background scale factors 220800.000000, 942400.000000
[Sat Jun 22 08:47:42 2013] User source parameters:
  Position = (251.4, 461.0) = 1 53 2.92 -13 46 54.0
  Extent = 4.4 (3.5-5.5)", rotation angle = 0
  Source aperture counts = 113.7 +/- 12.5
  Background aperture counts = 17.3
  Rate = 0.002 +/- 0.0002

[Sat Jun 22 08:48:04 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:04 2013] Using photon index=1.80, rate=0.00171, arf fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src3.arf
[Sat Jun 22 08:48:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:05 2013] Updating source flux to 6.9e-14
[Sat Jun 22 08:48:33 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Sat Jun 22 08:48:33 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 08:48:54 2013] xmm0109540101/analysis//spectral/fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete