[Sat Jun 22 05:37:50 2013] Detection parameters:
  Position = (468.6, 389.8) = 1 51 58.03 -13 52 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.4 +/- 9.8
  Background counts = 12.9
  Rate = 0.001 +/- 0.0002

[Sat Jun 22 05:37:54 2013] Off-axis axis estimate = 14.01'
[Sat Jun 22 05:38:59 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:38:59 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Sat Jun 22 05:38:59 2013] source mask rpix=3.1, npix_max = 51, mask sum = 46, frac = 0.893
[Sat Jun 22 05:38:59 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 13.43"
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src62.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src62.csv
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src62_1.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src62.csv
[Sat Jun 22 05:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:03 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sat Jun 22 05:39:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sat Jun 22 05:39:03 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sat Jun 22 05:39:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sat Jun 22 05:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:56 2013] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 17.103133 pixels away
[Sat Jun 22 05:39:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:39:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:39:56 2013] Assessing source extent using major
[Sat Jun 22 05:39:56 2013] Source does appear to be extended
[Sat Jun 22 05:39:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:54 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:54 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Sat Jun 22 05:40:54 2013] source mask rpix=3.1, npix_max = 51, mask sum = 46, frac = 0.893
[Sat Jun 22 05:40:54 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 13.43"
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src60.ximg exists
[Sat Jun 22 05:40:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src60.csv
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src60_1.ximg exists
[Sat Jun 22 05:40:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src60.csv
[Sat Jun 22 05:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Sat Jun 22 05:40:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Sat Jun 22 05:40:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sat Jun 22 05:40:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:41:50 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 17.786751 pixels away
[Sat Jun 22 05:41:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:41:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:41:50 2013] Assessing source extent using major
[Sat Jun 22 05:41:50 2013] Source does appear to be extended
[Sat Jun 22 05:41:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:43:35 2013] XMMSAS src. selection expression = ellipse(40722.206879, 33867.948730, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 05:43:35 2013] Not overwriting source region fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src28_src.reg
[Sat Jun 22 05:43:35 2013] Extracting stamp from image fullrun_mos1_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (431, 352) - (506, 427)
[Sat Jun 22 05:43:35 2013] XMMSAS bgd. selection expression = annulus(40722.206879, 33867.948730, 1087.500000, 2175.000000, X, Y) && !ellipse(39538.066562, 32697.240800, 784.038423, 784.038423, 0.000000, X, Y)
[Sat Jun 22 05:43:35 2013] Writing fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src28.gif
[Sat Jun 22 06:09:55 2013] Mean detx,y = (12801.90, 7453.26) 
[Sat Jun 22 06:09:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 06:10:30 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 06:10:30 2013] Setting source spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jun 22 06:10:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jun 22 07:23:45 2013] Not generating rmf since there are only 56 counts
[Sat Jun 22 07:23:45 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:00 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:00 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 101.00
[Sat Jun 22 08:48:00 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 304.00
[Sat Jun 22 08:48:00 2013] Got source and background scale factors 970750.000000, 5018016.000000
[Sat Jun 22 08:48:00 2013] User source parameters:
  Position = (468.6, 389.8) = 1 51 58.03 -13 52 0.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 42.2 +/- 11.1
  Background aperture counts = 58.8
  Rate = 0.0008 +/- 0.0002

[Sat Jun 22 08:48:00 2013] Updating counts from extracted products
[Sat Jun 22 08:48:00 2013] Set source signif. to 42.19/7.67 = 5.50
[Sat Jun 22 08:48:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:08 2013] Using photon index=1.80, rate=0.000789, arf fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src28.arf
[Sat Jun 22 08:48:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:08 2013] Updating source flux to 2e-14
[Sat Jun 22 08:48:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:48:54 2013] xmm0109540101/analysis//spectral/fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete