[Sat Jun 22 05:37:50 2013] Detection parameters:
  Position = (239.7, 478.5) = 1 53 6.40 -13 45 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.1 +/- 10.9
  Background counts = 13.6
  Rate = 0.001 +/- 0.0002

[Sat Jun 22 05:37:54 2013] Off-axis axis estimate = 13.73'
[Sat Jun 22 05:38:59 2013] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:38:59 2013] Initial guess for spatial extent in simple fitting = 13.29"
[Sat Jun 22 05:38:59 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Sat Jun 22 05:38:59 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 13.29"
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src65.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src65.csv
[Sat Jun 22 05:39:01 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat Jun 22 05:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src65.csv
[Sat Jun 22 05:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:03 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat Jun 22 05:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sat Jun 22 05:39:03 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat Jun 22 05:39:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sat Jun 22 05:39:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:56 2013] Spatial fit model total counts = 262.035000, observed total counts = 225.000000
[Sat Jun 22 05:39:56 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 05:39:56 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:39:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:39:56 2013] Assessing source extent using major
[Sat Jun 22 05:39:56 2013] Source does appear to be extended
[Sat Jun 22 05:39:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:54 2013] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:54 2013] Initial guess for spatial extent in simple fitting = 13.29"
[Sat Jun 22 05:40:54 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Sat Jun 22 05:40:54 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 13.29"
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src63.ximg exists
[Sat Jun 22 05:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src63.csv
[Sat Jun 22 05:40:55 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src63_1.ximg exists
[Sat Jun 22 05:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src63.csv
[Sat Jun 22 05:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sat Jun 22 05:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Sat Jun 22 05:40:56 2013] fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sat Jun 22 05:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Sat Jun 22 05:40:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:41:50 2013] Source 20 is offset by 1.654006 and 2.437789 pixels which is larger than
2 X fitted extent = 1.553071 x 1.553071, not incorporating fit results
[Sat Jun 22 05:41:50 2013] Spatial fit model total counts = 261.428000, observed total counts = 225.000000
[Sat Jun 22 05:41:50 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 05:41:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:41:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:41:50 2013] Assessing source extent using major
[Sat Jun 22 05:41:50 2013] Source does appear to be extended
[Sat Jun 22 05:41:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:43:35 2013] XMMSAS src. selection expression = ellipse(20807.960510, 41582.149628, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 05:43:35 2013] Not overwriting source region fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src20_src.reg
[Sat Jun 22 05:43:35 2013] Extracting stamp from image fullrun_mos1_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (202, 441) - (277, 516)
[Sat Jun 22 05:43:35 2013] XMMSAS bgd. selection expression = annulus(20807.960510, 41582.149628, 1087.500000, 2175.000000, X, Y) && !ellipse(21821.238000, 40061.950000, 355.805610, 355.805610, 0.000000, X, Y) && !ellipse(22471.171753, 42652.453003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22174.987305, 40496.832062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21784.018311, 42405.399872, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 05:43:35 2013] Writing fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src20.gif
[Sat Jun 22 06:11:18 2013] Mean detx,y = (9596.49, -13608.88) 
[Sat Jun 22 06:11:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 06:11:46 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 06:11:46 2013] Setting source spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Jun 22 06:11:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Jun 22 07:24:12 2013] Not generating rmf since there are only 54 counts
[Sat Jun 22 07:24:12 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:01 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:01 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 154.00
[Sat Jun 22 08:48:01 2013] Total counts from fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 328.00
[Sat Jun 22 08:48:01 2013] Got source and background scale factors 1300248.000000, 3552229.000000
[Sat Jun 22 08:48:01 2013] User source parameters:
  Position = (239.7, 478.5) = 1 53 6.40 -13 45 37.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 33.9 +/- 13.4
  Background aperture counts = 120.1
  Rate = 0.0006 +/- 0.0003

[Sat Jun 22 08:48:01 2013] Updating counts from extracted products
[Sat Jun 22 08:48:01 2013] Set source signif. to 33.94/10.96 = 3.10
[Sat Jun 22 08:48:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:08 2013] Using photon index=1.80, rate=0.000635, arf fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src20.arf
[Sat Jun 22 08:48:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:08 2013] Updating source flux to 2.2e-14
[Sat Jun 22 08:48:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:48:54 2013] xmm0109540101/analysis//spectral/fullrun_mos1_xmm0109540101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete