[Tue Jul 24 04:09:45 2012] Detection parameters:
  Position = (493.1, 315.3) = 10 44 1.02 -59 21 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.3 +/- 6.9
  Background counts = 2.2
  Rate = 0.002 +/- 0.0006

[Tue Jul 24 04:09:46 2012] Off-axis axis estimate = 14.17'
[Tue Jul 24 05:23:53 2012] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 05:23:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 24 05:23:53 2012] Initial guess for spatial extent in simple fitting = 13.51"
[Tue Jul 24 05:23:53 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.077
[Tue Jul 24 05:23:53 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 13.51"
[Tue Jul 24 05:51:26 2012] fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_src17.ximg exists
[Tue Jul 24 05:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_src17.csv
[Tue Jul 24 05:51:26 2012] fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Jul 24 05:51:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_src17.csv
[Tue Jul 24 05:51:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 05:51:27 2012] fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Jul 24 05:51:27 2012] fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Jul 24 05:51:27 2012] Fit fullrun_mos2_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Jul 24 05:51:39 2012] Spatial fit model total counts = 49.322300, observed total counts = 49.000000
[Tue Jul 24 05:51:39 2012] Offset between fit and detection position for source 5 = 0.158741 pixels
[Tue Jul 24 05:51:39 2012] 48.468000 total counts/ 26.203400 bgd. counts: snr = 4.349467
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.158741 pixels
  Position = (493.2, 315.4) = 10 44 0.98 -59 21 45.8
  Extent = 9.0 (4.2-17.8)", rotation angle = 0
  Source counts = 22.3 +/- 7.0
  Background counts = 26.2
  Rate = 0.002 +/- 0.0006
[Tue Jul 24 05:51:39 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 05:51:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 05:51:39 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 05:51:39 2012] Source does appear to be extended
[Tue Jul 24 05:51:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 07:04:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 07:04:40 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Tue Jul 24 07:04:40 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.949
[Tue Jul 24 07:04:40 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.99"
[Tue Jul 24 07:22:29 2012] fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jul 24 07:22:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_src12.csv
[Tue Jul 24 07:22:30 2012] fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jul 24 07:22:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_src12.csv
[Tue Jul 24 07:22:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 07:22:30 2012] fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jul 24 07:22:30 2012] fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jul 24 07:22:30 2012] Fit fullrun_mos2_xmm0109530401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jul 24 07:22:40 2012] Warning, spatial fit 12 centroid is now closest to src. 7
[Tue Jul 24 07:22:40 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 07:22:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 07:22:40 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 07:22:40 2012] Source does appear to be extended
[Tue Jul 24 07:22:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 07:22:40 2012] Deleting source due to low Poisson probability 0.9