[Tue Jul 24 04:09:28 2012] Detection parameters:
  Position = (311.7, 278.9) = 10 45 44.25 -59 24 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3005.2 +/- 66.1
  Background counts = 5.6
  Rate = 0.3 +/- 0.006

[Tue Jul 24 04:09:28 2012] Off-axis axis estimate = 1.71'
[Tue Jul 24 04:53:43 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 04:53:43 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jul 24 04:53:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Tue Jul 24 04:53:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jul 24 05:23:53 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 24 05:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 05:23:53 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 24 05:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 05:23:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 05:23:53 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 24 05:23:53 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 24 05:23:53 2012] Fit fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 24 05:51:36 2012] Spatial fit model total counts = 2634.530000, observed total counts = 2636.000000
[Tue Jul 24 05:51:36 2012] Offset between fit and detection position for source 4 = 0.028707 pixels
[Tue Jul 24 05:51:36 2012] 2648.490000 total counts/ 606.580000 bgd. counts: snr = 82.907258
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.028707 pixels
  Position = (311.7, 278.9) = 10 45 44.24 -59 24 27.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2041.9 +/- 51.5
  Background counts = 606.6
  Rate = 0.2 +/- 0.004
[Tue Jul 24 05:51:36 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 05:51:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 05:51:36 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 05:51:36 2012] Source does appear to be extended
[Tue Jul 24 05:51:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 06:37:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:37:33 2012] Initial guess for spatial extent in simple fitting = 5.47"
[Tue Jul 24 06:37:33 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.972
[Tue Jul 24 06:37:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.47"
[Tue Jul 24 07:04:39 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 24 07:04:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 07:04:39 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 24 07:04:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 07:04:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 07:04:39 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 24 07:04:39 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 24 07:04:39 2012] Fit fullrun_mos1_xmm0109530401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 24 07:22:38 2012] Spatial fit model total counts = 2625.010000, observed total counts = 2625.000000
[Tue Jul 24 07:22:38 2012] Offset between fit and detection position for source 4 = 0.014453 pixels
[Tue Jul 24 07:22:38 2012] 2648.546000 total counts/ 603.866000 bgd. counts: snr = 83.206080
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.014453 pixels
  Position = (311.7, 278.9) = 10 45 44.24 -59 24 27.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2044.7 +/- 51.5
  Background counts = 603.9
  Rate = 0.2 +/- 0.004
[Tue Jul 24 07:22:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 07:22:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 07:22:38 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 07:22:38 2012] Source does appear to be extended
[Tue Jul 24 07:22:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 07:51:11 2012] Counts = 2044.680000, rescaling region sizes by 2.000000
[Tue Jul 24 07:51:11 2012] XMMSAS src. selection expression = ellipse(27067.935600, 24216.350880, 654.996019, 654.996019, 0.000000, X, Y)
[Tue Jul 24 07:51:11 2012] Writing source region out to fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4_src.reg
[Tue Jul 24 07:51:11 2012] Extracting stamp from image fullrun_mos1_xmm0109530401_pi300-10000_cl_sm2.00.img.gz, (274, 241) - (349, 317)
[Tue Jul 24 07:51:11 2012] XMMSAS bgd. selection expression = annulus(27067.935600, 24216.350880, 2183.320063, 4366.640126, X, Y) && !ellipse(22219.744461, 20637.787735, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 07:51:11 2012] Writing fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4.gif
[Tue Jul 24 07:51:13 2012] Mean detx,y = (288.56, -203.39) 
[Tue Jul 24 07:51:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 07:51:27 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 07:51:27 2012] Setting source spectrum file to fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jul 24 07:51:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jul 24 08:10:50 2012] Updating aperture counts using extracted products
[Tue Jul 24 08:10:50 2012] Error reading totcts from fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jul 24 08:10:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 08:10:50 2012] Using photon index=1.80, rate=0.176, arf fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4.arf
[Tue Jul 24 08:10:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 08:10:50 2012] Updating source flux to 2.1e-12
[Tue Jul 24 08:11:02 2012] Reading fit data from xmm0109530401/analysis//spectral/fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4_pl.csv
[Tue Jul 24 08:11:02 2012] Spectral fit parameter nH value = 6.90459e+21
[Tue Jul 24 08:11:02 2012] Spectral fit parameter PhoIndex value = 4.84619
[Tue Jul 24 08:11:02 2012] Failed to get F(0.3-8.0) from xmm0109530401/analysis//spectral/fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue Jul 24 08:11:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 08:11:02 2012] Using Nh = 6.9e+21, photon index=4.85, rate=0.176, arf fullrun_mos1_xmm0109530401_pi300-10000_pass1_cl_src4.arf
[Tue Jul 24 08:11:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 08:11:02 2012] Updating source flux to 1.3e-12