[Tue Jul 24 04:09:28 2012] Detection parameters:
  Position = (414.3, 337.2) = 10 44 45.88 -59 20 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.6 +/- 7.8
  Background counts = 5.7
  Rate = 0.003 +/- 0.0007

[Tue Jul 24 04:09:28 2012] Off-axis axis estimate = 8.86'
[Tue Jul 24 04:53:43 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 04:53:43 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Tue Jul 24 04:53:43 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Tue Jul 24 04:53:43 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.86"
[Tue Jul 24 05:23:53 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jul 24 05:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src19.csv
[Tue Jul 24 05:23:53 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jul 24 05:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src19.csv
[Tue Jul 24 05:23:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 05:23:53 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jul 24 05:23:53 2012] fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jul 24 05:23:53 2012] Fit fullrun_mos1_xmm0109530401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Jul 24 05:51:36 2012] Spatial fit model total counts = 131.147000, observed total counts = 131.000000
[Tue Jul 24 05:51:36 2012] Offset between fit and detection position for source 10 = 1.041621 pixels
[Tue Jul 24 05:51:36 2012] 132.420900 total counts/ 123.078000 bgd. counts: snr = 0.842154
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.041621 pixels
  Position = (413.7, 338.0) = 10 44 46.27 -59 20 9.4
  Extent = 3.7 (2.7-7.0)", rotation angle = 0
  Source counts = 9.3 +/- 11.5
  Background counts = 123.1
  Rate = 0.0008 +/- 0.001
  Deleting source due to low Poisson probability