[Tue Aug 14 10:12:41 2012] Detection parameters:
  Position = (312.0, 173.4) = 10 45 37.65 -59 31 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.8 +/- 8.9
  Background counts = 8.6
  Rate = 0.01 +/- 0.003

[Tue Aug 14 10:12:41 2012] Off-axis axis estimate = 9.12'
[Tue Aug 14 10:14:50 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 10:14:50 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Tue Aug 14 10:14:50 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983
[Tue Aug 14 10:14:50 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.99"
[Tue Aug 14 10:55:16 2012] fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_src16.ximg exists
[Tue Aug 14 10:55:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_src16.csv
[Tue Aug 14 10:55:16 2012] fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Aug 14 10:55:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_src16.csv
[Tue Aug 14 10:55:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 10:55:16 2012] fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Aug 14 10:55:16 2012] fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Aug 14 10:55:16 2012] Fit fullrun_pn_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Aug 14 12:01:02 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.940811 pixels away
[Tue Aug 14 12:01:02 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 12:01:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 12:01:02 2012] Assessing source extent using major
[Tue Aug 14 12:01:02 2012] Source does appear to be extended
[Tue Aug 14 12:01:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 12:01:21 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 12:01:21 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Tue Aug 14 12:01:21 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983
[Tue Aug 14 12:01:21 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.99"
[Tue Aug 14 12:33:32 2012] fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_src15.ximg exists
[Tue Aug 14 12:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_src15.csv
[Tue Aug 14 12:33:32 2012] fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Aug 14 12:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_src15.csv
[Tue Aug 14 12:33:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 12:33:32 2012] fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Aug 14 12:33:32 2012] fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Aug 14 12:33:32 2012] Fit fullrun_pn_xmm0109530301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Aug 14 13:15:28 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 96.760116 pixels away
[Tue Aug 14 13:15:28 2012] Spatial fit model total counts = 122.498000, observed total counts = 122.000000
[Tue Aug 14 13:15:28 2012] Offset between fit and detection position for source 16 = 0.383039 pixels
[Tue Aug 14 13:15:28 2012] 120.369300 total counts/ 92.579400 bgd. counts: snr = 2.888217
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.383039 pixels
  Position = (312.4, 173.3) = 10 45 37.44 -59 31 49.4
  Extent = 5.8 (4.0-8.9)", rotation angle = 0
  Source counts = 27.8 +/- 11.0
  Background counts = 92.6
  Rate = 0.006 +/- 0.002
[Tue Aug 14 13:15:28 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 13:15:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 13:15:28 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 13:15:28 2012] Source does appear to be extended
[Tue Aug 14 13:15:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 13:15:42 2012] XMMSAS src. selection expression = ellipse(27126.563800, 15026.384200, 348.772810, 348.772810, 0.000000, X, Y)
[Tue Aug 14 13:15:42 2012] Writing source region out to fullrun_pn_xmm0109530301_pi300-10000_pass1_cl_src16_src.reg
[Tue Aug 14 13:15:42 2012] Extracting stamp from image fullrun_pn_xmm0109530301_pi300-10000_cl_sm2.00.img.gz, (292, 153) - (332, 193)
[Tue Aug 14 13:15:42 2012] XMMSAS bgd. selection expression = annulus(27126.563800, 15026.384200, 581.288017, 1162.576033, X, Y)
[Tue Aug 14 13:15:42 2012] Writing fullrun_pn_xmm0109530301_pi300-10000_pass1_cl_src16.gif
[Tue Aug 14 13:25:31 2012] Mean detx,y = (4879.43, -7753.64) 
[Tue Aug 14 13:25:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 13:25:56 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 13:25:56 2012] Setting source spectrum file to fullrun_pn_xmm0109530301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Aug 14 13:25:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109530301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Aug 14 13:33:02 2012] Not generating rmf since there are only 27 counts
[Tue Aug 14 13:33:02 2012] rmf not generated due to insufficient counts
[Tue Aug 14 14:06:09 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:06:09 2012] Error reading totcts from fullrun_pn_xmm0109530301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Aug 14 14:06:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:06:10 2012] Using photon index=1.80, rate=0.00562, arf fullrun_pn_xmm0109530301_pi300-10000_pass1_cl_src16.arf
[Tue Aug 14 14:06:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:06:10 2012] Updating source flux to 3.4e-14
[Tue Aug 14 14:07:10 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting