[Tue Aug 14 10:13:20 2012] Detection parameters:
  Position = (245.1, 233.2) = 10 46 15.82 -59 27 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 8.3
  Background counts = 3.6
  Rate = 0.006 +/- 0.001

[Tue Aug 14 10:13:20 2012] Off-axis axis estimate = 6.11'
[Tue Aug 14 10:55:16 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 10:55:16 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Tue Aug 14 10:55:16 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.044
[Tue Aug 14 10:55:16 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.48"
[Tue Aug 14 11:34:49 2012] fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_src6.ximg exists
[Tue Aug 14 11:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_src6.csv
[Tue Aug 14 11:34:49 2012] fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Aug 14 11:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_src6.csv
[Tue Aug 14 11:34:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 11:34:49 2012] fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Aug 14 11:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Aug 14 11:34:49 2012] fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Aug 14 11:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Aug 14 11:34:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 12:01:07 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.689417 pixels away
[Tue Aug 14 12:01:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 12:01:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 12:01:07 2012] Assessing source extent using major
[Tue Aug 14 12:01:07 2012] Source does appear to be extended
[Tue Aug 14 12:01:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 12:33:32 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 12:33:32 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Tue Aug 14 12:33:32 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.044
[Tue Aug 14 12:33:32 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.48"
[Tue Aug 14 12:56:56 2012] fullrun_mos1_xmm0109530301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Aug 14 12:56:56 2012] fullrun_mos1_xmm0109530301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Aug 14 12:56:56 2012] Fit fullrun_mos1_xmm0109530301_pi300-10000_cl_pass1_src5 appears to have run properly
[Tue Aug 14 12:56:57 2012] fullrun_mos1_xmm0109530301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Aug 14 12:56:57 2012] fullrun_mos1_xmm0109530301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Aug 14 12:56:57 2012] Fit fullrun_mos1_xmm0109530301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Aug 14 13:15:30 2012] Spatial fit model total counts = 74.443400, observed total counts = 74.000000
[Tue Aug 14 13:15:30 2012] Offset between fit and detection position for source 11 = 0.261303 pixels
[Tue Aug 14 13:15:30 2012] 75.921100 total counts/ 43.940800 bgd. counts: snr = 4.824458
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.261303 pixels
  Position = (244.9, 233.3) = 10 46 15.96 -59 27 28.0
  Extent = 7.3 (4.3-12.6)" x 4.2 (3.1-7.1)", rotation angle = 313 (90-90) degrees
  Source counts = 32.0 +/- 8.7
  Background counts = 43.9
  Rate = 0.004 +/- 0.001
[Tue Aug 14 13:15:30 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 13:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 13:15:30 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 13:15:30 2012] Source does appear to be extended
[Tue Aug 14 13:15:30 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.60
[Tue Aug 14 13:33:19 2012] XMMSAS src. selection expression = ellipse(21257.323080, 20251.094800, 435.753613, 254.518807, 313.279651, X, Y)
[Tue Aug 14 13:33:19 2012] Writing source region out to fullrun_mos1_xmm0109530301_pi300-10000_pass1_cl_src11_src.reg
[Tue Aug 14 13:33:19 2012] Extracting stamp from image fullrun_mos1_xmm0109530301_pi300-10000_cl_sm2.00.img.gz, (220, 208) - (270, 258)
[Tue Aug 14 13:33:19 2012] XMMSAS bgd. selection expression = annulus(21257.323080, 20251.094800, 726.256021, 1452.512042, X, Y)
[Tue Aug 14 13:33:19 2012] Writing fullrun_mos1_xmm0109530301_pi300-10000_pass1_cl_src11.gif
[Tue Aug 14 13:34:54 2012] Mean detx,y = (68.78, 5816.98) 
[Tue Aug 14 13:34:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 13:35:13 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 13:35:13 2012] Setting source spectrum file to fullrun_mos1_xmm0109530301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Aug 14 13:35:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109530301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Aug 14 13:51:51 2012] Not generating rmf since there are only 31 counts
[Tue Aug 14 13:51:51 2012] rmf not generated due to insufficient counts
[Tue Aug 14 14:06:10 2012] Updating aperture counts using extracted products
[Tue Aug 14 14:06:10 2012] Error reading totcts from fullrun_mos1_xmm0109530301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Aug 14 14:06:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 14:06:10 2012] Using photon index=1.80, rate=0.00362, arf fullrun_mos1_xmm0109530301_pi300-10000_pass1_cl_src11.arf
[Tue Aug 14 14:06:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 14:06:10 2012] Updating source flux to 7.4e-14
[Tue Aug 14 14:06:13 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting