[Fri Jul 20 12:35:41 2012] Detection parameters:
  Position = (446.3, 173.7) = 10 44 19.17 -59 31 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.7 +/- 8.3
  Background counts = 8.7
  Rate = 0.007 +/- 0.002

[Fri Jul 20 12:35:42 2012] Off-axis axis estimate = 14.03'
[Fri Jul 20 12:37:02 2012] Using EEF radius (= 13.44 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 12:37:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 20 12:37:02 2012] Initial guess for spatial extent in simple fitting = 13.44"
[Fri Jul 20 12:37:02 2012] source mask rpix=3.1, npix_max = 51, mask sum = 48, frac = 0.931
[Fri Jul 20 12:37:02 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.44"
[Fri Jul 20 13:03:19 2012] fullrun_pn_xmm0109530201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jul 20 13:03:19 2012] fullrun_pn_xmm0109530201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jul 20 13:03:19 2012] Fit fullrun_pn_xmm0109530201_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jul 20 13:03:19 2012] fullrun_pn_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 20 13:03:19 2012] fullrun_pn_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 20 13:03:19 2012] Fit fullrun_pn_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jul 20 13:38:58 2012] Spatial fit model total counts = 117.319000, observed total counts = 107.000000
[Fri Jul 20 13:38:58 2012] Offset between fit and detection position for source 6 = 0.431257 pixels
[Fri Jul 20 13:38:58 2012] 116.610600 total counts/ 85.887000 bgd. counts: snr = 3.315190
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.431257 pixels
  Position = (446.1, 173.3) = 10 44 19.31 -59 31 50.8
  Extent = 10.0 (6.5-15.7)" x 4.0 (4.0-4.0)", rotation angle = 110 (95-133) degrees
  Source counts = 30.7 +/- 10.8
  Background counts = 85.9
  Rate = 0.006 +/- 0.002
[Fri Jul 20 13:38:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 13:38:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 13:38:58 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 13:38:58 2012] Source does appear to be extended
[Fri Jul 20 13:38:58 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.61
[Fri Jul 20 13:38:58 2012] Source is asymmetric
[Fri Jul 20 13:39:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:39:08 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Fri Jul 20 13:39:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Fri Jul 20 13:39:08 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.99"
[Fri Jul 20 14:02:06 2012] fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jul 20 14:02:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_src6.csv
[Fri Jul 20 14:02:06 2012] fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jul 20 14:02:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_src6.csv
[Fri Jul 20 14:02:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:02:07 2012] fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jul 20 14:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 20 14:02:07 2012] fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jul 20 14:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 20 14:02:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:33:10 2012] Warning, spatial fit 6 centroid is now closest to src. 7
[Fri Jul 20 14:33:10 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 14:33:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 14:33:10 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 14:33:10 2012] Source does appear to be extended
[Fri Jul 20 14:33:10 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.61
[Fri Jul 20 14:33:10 2012] Source is asymmetric
[Fri Jul 20 14:33:20 2012] XMMSAS src. selection expression = ellipse(38759.267660, 15029.986000, 598.708817, 240.471007, 110.080177, X, Y)
[Fri Jul 20 14:33:20 2012] Writing source region out to fullrun_pn_xmm0109530201_pi300-10000_pass1_cl_src6_src.reg
[Fri Jul 20 14:33:20 2012] Extracting stamp from image fullrun_pn_xmm0109530201_pi300-10000_cl_sm2.00.img.gz, (412, 139) - (480, 208)
[Fri Jul 20 14:33:20 2012] XMMSAS bgd. selection expression = annulus(38759.267660, 15029.986000, 997.848029, 1995.696057, X, Y)
[Fri Jul 20 14:33:20 2012] Writing fullrun_pn_xmm0109530201_pi300-10000_pass1_cl_src6.gif
[Fri Jul 20 14:36:23 2012] Mean detx,y = (-5681.58, -14716.84) 
[Fri Jul 20 14:36:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 14:36:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 14:36:39 2012] Setting source spectrum file to fullrun_pn_xmm0109530201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 20 14:36:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109530201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jul 20 14:48:59 2012] Not generating rmf since there are only 30 counts
[Fri Jul 20 14:48:59 2012] rmf not generated due to insufficient counts
[Fri Jul 20 15:19:31 2012] Updating aperture counts using extracted products
[Fri Jul 20 15:19:31 2012] Error reading totcts from fullrun_pn_xmm0109530201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 20 15:19:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:19:31 2012] Using photon index=1.80, rate=0.00634, arf fullrun_pn_xmm0109530201_pi300-10000_pass1_cl_src6.arf
[Fri Jul 20 15:19:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:19:31 2012] Updating source flux to 8e-14
[Fri Jul 20 15:20:10 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting