[Fri Jul 20 12:36:21 2012] Detection parameters:
  Position = (403.3, 318.5) = 10 44 44.06 -59 21 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.9 +/- 6.8
  Background counts = 5.2
  Rate = 0.005 +/- 0.001

[Fri Jul 20 12:36:22 2012] Off-axis axis estimate = 7.74'
[Fri Jul 20 13:16:30 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:16:30 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Fri Jul 20 13:16:30 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.912
[Fri Jul 20 13:16:30 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.30"
[Fri Jul 20 13:38:54 2012] fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jul 20 13:38:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_src6.csv
[Fri Jul 20 13:38:54 2012] fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jul 20 13:38:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_src6.csv
[Fri Jul 20 13:38:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 13:38:54 2012] fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 20 13:38:54 2012] fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 20 13:38:54 2012] Fit fullrun_mos2_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jul 20 13:39:02 2012] Spatial fit model total counts = 121.144000, observed total counts = 120.000000
[Fri Jul 20 13:39:02 2012] Offset between fit and detection position for source 10 = 7.077966 pixels
[Fri Jul 20 13:39:02 2012] 131.265000 total counts/ 64.956800 bgd. counts: snr = 8.227254
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 7.077966 pixels
  Position = (397.7, 314.2) = 10 44 47.23 -59 21 39.1
  Extent = 20.6 (20.3-41.2)", rotation angle = 0
  Source counts = 66.3 +/- 11.5
  Background counts = 65.0
  Rate = 0.008 +/- 0.001
[Fri Jul 20 13:39:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 13:39:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 13:39:02 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 13:39:02 2012] Source does appear to be extended
[Fri Jul 20 13:39:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:14:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 14:14:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 20 14:14:26 2012] Initial guess for spatial extent in simple fitting = 20.60"
[Fri Jul 20 14:14:26 2012] source mask rpix=4.7, npix_max = 109, mask sum = 100, frac = 0.912
[Fri Jul 20 14:14:26 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 20.60"
[Fri Jul 20 14:33:06 2012] fullrun_mos2_xmm0109530201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jul 20 14:33:06 2012] fullrun_mos2_xmm0109530201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jul 20 14:33:06 2012] Fit fullrun_mos2_xmm0109530201_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri Jul 20 14:33:06 2012] fullrun_mos2_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jul 20 14:33:06 2012] fullrun_mos2_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jul 20 14:33:06 2012] Fit fullrun_mos2_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jul 20 14:33:14 2012] Spatial fit model total counts = 306.540000, observed total counts = 302.000000
[Fri Jul 20 14:33:14 2012] Offset between fit and detection position for source 10 = 9.459703 pixels
[Fri Jul 20 14:33:14 2012] 315.667000 total counts/ 197.264000 bgd. counts: snr = 8.430218
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 9.459703 pixels
  Position = (393.4, 305.7) = 10 44 49.66 -59 22 15.8
  Extent = 41.2 (41.2-82.4)", rotation angle = 0
  Source counts = 118.4 +/- 17.8
  Background counts = 197.3
  Rate = 0.01 +/- 0.002
[Fri Jul 20 14:33:14 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 14:33:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 14:33:14 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 14:33:14 2012] Source does appear to be extended
[Fri Jul 20 14:33:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:33:14 2012] Source is confused with source 11
[Fri Jul 20 14:33:14 2012] Source is confused with source 1
[Fri Jul 20 15:06:10 2012] XMMSAS src. selection expression = ellipse(34181.584000, 26549.716000, 2472.000071, 2472.000071, 0.000000, X, Y)
[Fri Jul 20 15:06:10 2012] Writing source region out to fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10_src.reg
[Fri Jul 20 15:06:10 2012] Extracting stamp from image fullrun_mos2_xmm0109530201_pi300-10000_cl_sm2.00.img.gz, (251, 164) - (536, 448)
[Fri Jul 20 15:06:10 2012] XMMSAS bgd. selection expression = annulus(34181.584000, 26549.716000, 4120.000119, 8240.000237, X, Y) && !ellipse(25829.656372, 23883.150848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29281.430756, 29979.034393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32120.307556, 26962.480377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34368.647200, 25919.524400, 391.790411, 391.790411, 0.000000, X, Y) && !ellipse(36087.513200, 21797.320000, 261.742408, 261.742408, 0.000000, X, Y)
[Fri Jul 20 15:06:10 2012] Writing fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10.gif
[Fri Jul 20 15:10:14 2012] Mean detx,y = (8782.16, 2330.90) 
[Fri Jul 20 15:10:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 15:11:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 15:11:39 2012] Setting source spectrum file to fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul 20 15:11:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jul 20 15:19:33 2012] Updating aperture counts using extracted products
[Fri Jul 20 15:19:33 2012] Error reading totcts from fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul 20 15:19:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:19:33 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10.arf
[Fri Jul 20 15:19:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:19:34 2012] Updating source flux to 2.3e-13
[Fri Jul 20 15:20:03 2012] Flag c found in src. 10 procflags, skipping spectral fitting
[Fri Jul 20 15:20:10 2012] Reading fit data from xmm0109530201/analysis//spectral/fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10_pl.csv
[Fri Jul 20 15:20:10 2012] Spectral fit parameter nH value = 4.06126e+21
[Fri Jul 20 15:20:10 2012] Spectral fit parameter PhoIndex value = 3.01156
[Fri Jul 20 15:20:10 2012] Failed to get F(0.3-8.0) from xmm0109530201/analysis//spectral/fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 15:20:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:20:10 2012] Using Nh = 4.1e+21, photon index=3.01, rate=0.0135, arf fullrun_mos2_xmm0109530201_pi300-10000_pass1_cl_src10.arf
[Fri Jul 20 15:20:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:20:10 2012] Updating source flux to 1.8e-13