[Fri Jul 20 12:36:01 2012] Detection parameters:
  Position = (341.5, 208.1) = 10 45 19.16 -59 29 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.4 +/- 8.9
  Background counts = 4.7
  Rate = 0.007 +/- 0.001

[Fri Jul 20 12:36:01 2012] Off-axis axis estimate = 7.26'
[Fri Jul 20 13:03:20 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:03:20 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Fri Jul 20 13:03:20 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949
[Fri Jul 20 13:03:20 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.06"
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jul 20 13:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src5.csv
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jul 20 13:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src5.csv
[Fri Jul 20 13:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 13:16:30 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jul 20 13:16:30 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jul 20 13:16:30 2012] Fit fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jul 20 13:39:00 2012] Spatial fit model total counts = 88.646000, observed total counts = 84.000000
[Fri Jul 20 13:39:00 2012] Offset between fit and detection position for source 7 = 0.349463 pixels
[Fri Jul 20 13:39:00 2012] 88.198300 total counts/ 53.721400 bgd. counts: snr = 4.703862
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.349463 pixels
  Position = (341.5, 208.4) = 10 45 19.13 -59 29 19.6
  Extent = 6.8 (5.2-9.8)", rotation angle = 0
  Source counts = 34.5 +/- 9.4
  Background counts = 53.7
  Rate = 0.004 +/- 0.001
[Fri Jul 20 13:39:00 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 13:39:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 13:39:00 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 13:39:00 2012] Source does appear to be extended
[Fri Jul 20 13:39:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:02:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 14:02:07 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Fri Jul 20 14:02:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.169
[Fri Jul 20 14:02:07 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.82"
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 20 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src4.csv
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 20 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src4.csv
[Fri Jul 20 14:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 20 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 20 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul 20 14:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:33:11 2012] Warning, spatial fit 4 centroid is now closest to src. 9
[Fri Jul 20 14:33:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 14:33:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 14:33:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 14:33:11 2012] Source does appear to be extended
[Fri Jul 20 14:33:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:50:20 2012] XMMSAS src. selection expression = ellipse(29663.178600, 18083.811600, 409.308612, 409.308612, 0.000000, X, Y)
[Fri Jul 20 14:50:20 2012] Writing source region out to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src7_src.reg
[Fri Jul 20 14:50:20 2012] Extracting stamp from image fullrun_mos1_xmm0109530201_pi300-10000_cl_sm2.00.img.gz, (318, 185) - (365, 232)
[Fri Jul 20 14:50:20 2012] XMMSAS bgd. selection expression = annulus(29663.178600, 18083.811600, 682.181020, 1364.362039, X, Y)
[Fri Jul 20 14:50:20 2012] Writing fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src7.gif
[Fri Jul 20 14:51:04 2012] Mean detx,y = (7193.96, -134.61) 
[Fri Jul 20 14:51:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 14:51:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 14:51:15 2012] Setting source spectrum file to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul 20 14:51:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jul 20 15:02:16 2012] Not generating rmf since there are only 34 counts
[Fri Jul 20 15:02:16 2012] rmf not generated due to insufficient counts
[Fri Jul 20 15:19:32 2012] Updating aperture counts using extracted products
[Fri Jul 20 15:19:32 2012] Error reading totcts from fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul 20 15:19:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:19:32 2012] Using photon index=1.80, rate=0.00394, arf fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src7.arf
[Fri Jul 20 15:19:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:19:32 2012] Updating source flux to 7.1e-14
[Fri Jul 20 15:19:35 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting