[Fri Jul 20 12:36:01 2012] Detection parameters:
  Position = (241.9, 233.8) = 10 46 16.00 -59 27 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.3 +/- 10.9
  Background counts = 3.4
  Rate = 0.01 +/- 0.001

[Fri Jul 20 12:36:01 2012] Off-axis axis estimate = 6.23'
[Fri Jul 20 13:03:20 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:03:20 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Fri Jul 20 13:03:20 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.034
[Fri Jul 20 13:03:20 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.54"
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 20 13:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src3.csv
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 20 13:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src3.csv
[Fri Jul 20 13:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 20 13:16:29 2012] Fit fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 20 13:39:00 2012] Spatial fit model total counts = 106.298000, observed total counts = 105.000000
[Fri Jul 20 13:39:00 2012] Offset between fit and detection position for source 6 = 0.301449 pixels
[Fri Jul 20 13:39:00 2012] 109.510000 total counts/ 50.711700 bgd. counts: snr = 8.256779
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.301449 pixels
  Position = (241.8, 233.5) = 10 46 16.07 -59 27 30.3
  Extent = 6.5 (5.2-8.3)", rotation angle = 0
  Source counts = 58.8 +/- 10.5
  Background counts = 50.7
  Rate = 0.007 +/- 0.001
[Fri Jul 20 13:39:00 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 13:39:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 13:39:00 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 13:39:00 2012] Source does appear to be extended
[Fri Jul 20 13:39:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:02:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 14:02:07 2012] Initial guess for spatial extent in simple fitting = 6.47"
[Fri Jul 20 14:02:07 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.013
[Fri Jul 20 14:02:07 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.47"
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 20 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src3.csv
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 20 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src3.csv
[Fri Jul 20 14:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 20 14:14:26 2012] Fit fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 20 14:33:11 2012] Spatial fit model total counts = 102.038000, observed total counts = 101.000000
[Fri Jul 20 14:33:11 2012] Offset between fit and detection position for source 6 = 0.020932 pixels
[Fri Jul 20 14:33:11 2012] 105.366700 total counts/ 44.849500 bgd. counts: snr = 9.036495
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.020932 pixels
  Position = (241.8, 233.5) = 10 46 16.06 -59 27 30.4
  Extent = 6.7 (5.3-8.5)", rotation angle = 0
  Source counts = 60.5 +/- 10.3
  Background counts = 44.8
  Rate = 0.007 +/- 0.001
[Fri Jul 20 14:33:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 14:33:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 14:33:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 14:33:11 2012] Source does appear to be extended
[Fri Jul 20 14:33:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:50:20 2012] XMMSAS src. selection expression = ellipse(20988.330500, 20266.398800, 399.285085, 399.285085, 0.000000, X, Y)
[Fri Jul 20 14:50:20 2012] Writing source region out to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src6_src.reg
[Fri Jul 20 14:50:20 2012] Extracting stamp from image fullrun_mos1_xmm0109530201_pi300-10000_cl_sm2.00.img.gz, (219, 211) - (265, 256)
[Fri Jul 20 14:50:20 2012] XMMSAS bgd. selection expression = annulus(20988.330500, 20266.398800, 665.475142, 1330.950284, X, Y)
[Fri Jul 20 14:50:20 2012] Writing fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src6.gif
[Fri Jul 20 14:50:50 2012] Mean detx,y = (571.44, 5859.08) 
[Fri Jul 20 14:50:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 14:51:02 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 14:51:02 2012] Setting source spectrum file to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 20 14:51:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jul 20 15:02:11 2012] Not generating rmf since there are only 60 counts
[Fri Jul 20 15:02:11 2012] rmf not generated due to insufficient counts
[Fri Jul 20 15:19:32 2012] Updating aperture counts using extracted products
[Fri Jul 20 15:19:32 2012] Error reading totcts from fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 20 15:19:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:19:32 2012] Using photon index=1.80, rate=0.00692, arf fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src6.arf
[Fri Jul 20 15:19:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:19:32 2012] Updating source flux to 1.1e-13
[Fri Jul 20 15:19:35 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting