[Fri Jul 20 12:36:01 2012] Detection parameters:
  Position = (297.4, 275.0) = 10 45 44.33 -59 24 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1931.9 +/- 52.7
  Background counts = 4.5
  Rate = 0.2 +/- 0.006

[Fri Jul 20 12:36:01 2012] Off-axis axis estimate = 1.70'
[Fri Jul 20 13:03:20 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:03:20 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jul 20 13:03:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Fri Jul 20 13:03:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 13:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 13:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 13:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 13:16:29 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 13:16:29 2012] Fit fullrun_mos1_xmm0109530201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 20 13:39:00 2012] Spatial fit model total counts = 1695.510000, observed total counts = 1690.000000
[Fri Jul 20 13:39:00 2012] Offset between fit and detection position for source 5 = 0.043127 pixels
[Fri Jul 20 13:39:00 2012] 1697.327000 total counts/ 336.837000 bgd. counts: snr = 74.128542
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.043127 pixels
  Position = (297.4, 275.1) = 10 45 44.31 -59 24 29.9
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 1360.5 +/- 41.2
  Background counts = 336.8
  Rate = 0.2 +/- 0.005
[Fri Jul 20 13:39:00 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 13:39:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 13:39:00 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 13:39:00 2012] Source does appear to be extended
[Fri Jul 20 13:39:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:02:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 14:02:07 2012] Initial guess for spatial extent in simple fitting = 5.79"
[Fri Jul 20 14:02:07 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.895
[Fri Jul 20 14:02:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.79"
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 14:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 14:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 14:14:26 2012] fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 14:14:26 2012] Fit fullrun_mos1_xmm0109530201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 20 14:33:11 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Jul 20 14:33:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 14:33:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 14:33:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 14:33:11 2012] Source does appear to be extended
[Fri Jul 20 14:33:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:50:20 2012] Counts = 1360.490000, rescaling region sizes by 2.000000
[Fri Jul 20 14:50:20 2012] XMMSAS src. selection expression = ellipse(25827.756200, 23882.307800, 694.924820, 694.924820, 0.000000, X, Y)
[Fri Jul 20 14:50:20 2012] Writing source region out to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5_src.reg
[Fri Jul 20 14:50:20 2012] Extracting stamp from image fullrun_mos1_xmm0109530201_pi300-10000_cl_sm2.00.img.gz, (257, 235) - (337, 315)
[Fri Jul 20 14:50:20 2012] XMMSAS bgd. selection expression = annulus(25827.756200, 23882.307800, 2316.416067, 4632.832133, X, Y) && !ellipse(20988.330500, 20266.398800, 532.380114, 532.380114, 0.000000, X, Y)
[Fri Jul 20 14:50:20 2012] Writing fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5.gif
[Fri Jul 20 14:50:21 2012] Mean detx,y = (242.60, -169.42) 
[Fri Jul 20 14:50:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 14:50:37 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 14:50:37 2012] Setting source spectrum file to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 20 14:50:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul 20 15:19:31 2012] Updating aperture counts using extracted products
[Fri Jul 20 15:19:31 2012] Error reading totcts from fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 20 15:19:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:19:32 2012] Using photon index=1.80, rate=0.156, arf fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5.arf
[Fri Jul 20 15:19:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:19:32 2012] Updating source flux to 1.8e-12
[Fri Jul 20 15:20:03 2012] Reading fit data from xmm0109530201/analysis//spectral/fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5_pl.csv
[Fri Jul 20 15:20:03 2012] Spectral fit parameter nH value = 6.35145e+21
[Fri Jul 20 15:20:03 2012] Spectral fit parameter PhoIndex value = 4.54807
[Fri Jul 20 15:20:03 2012] Failed to get F(0.3-8.0) from xmm0109530201/analysis//spectral/fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 15:20:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:20:03 2012] Using Nh = 6.4e+21, photon index=4.55, rate=0.156, arf fullrun_mos1_xmm0109530201_pi300-10000_pass1_cl_src5.arf
[Fri Jul 20 15:20:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:20:03 2012] Updating source flux to 1.1e-12