[Sun Jun 16 00:40:09 2013] Detection parameters:
  Position = (305.8, 269.9) = 2 22 43.07 -4 33 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.6 +/- 18.6
  Background counts = 17.2
  Rate = 0.01 +/- 0.001

[Sun Jun 16 00:40:10 2013] Off-axis axis estimate = 2.14'
[Sun Jun 16 00:41:09 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:09 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Sun Jun 16 00:41:09 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Sun Jun 16 00:41:09 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 7.50"
[Sun Jun 16 00:41:11 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src41.ximg exists
[Sun Jun 16 00:41:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src41.csv
[Sun Jun 16 00:41:11 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Jun 16 00:41:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src41.csv
[Sun Jun 16 00:41:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:12 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Jun 16 00:41:12 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Jun 16 00:41:12 2013] Fit fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Jun 16 00:41:33 2013] Source 43 is offset by -1.340166 and -0.188799 pixels which is larger than
2 X fitted extent = 0.887738 x 0.887738, not incorporating fit results
[Sun Jun 16 00:41:33 2013] Warning, spatial fit 41 centroid is now closest to src. 1
[Sun Jun 16 00:41:33 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:33 2013] Assessing source extent using major
[Sun Jun 16 00:41:33 2013] Source does appear to be extended
[Sun Jun 16 00:41:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:14 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:14 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Sun Jun 16 00:42:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Sun Jun 16 00:42:14 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 7.50"
[Sun Jun 16 00:42:15 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src40.ximg exists
[Sun Jun 16 00:42:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src40.csv
[Sun Jun 16 00:42:15 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src40_1.ximg exists
[Sun Jun 16 00:42:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src40.csv
[Sun Jun 16 00:42:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:16 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sun Jun 16 00:42:16 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sun Jun 16 00:42:16 2013] Fit fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Sun Jun 16 00:42:34 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 12.593951 pixels away
[Sun Jun 16 00:42:34 2013] Warning, spatial fit 40 centroid is now closest to src. 1
[Sun Jun 16 00:42:34 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:34 2013] Assessing source extent using major
[Sun Jun 16 00:42:34 2013] Source does appear to be extended
[Sun Jun 16 00:42:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:43:18 2013] XMMSAS src. selection expression = ellipse(26552.769531, 23433.938477, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 00:43:18 2013] Not overwriting source region fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_src.reg
[Sun Jun 16 00:43:18 2013] Extracting stamp from image fullrun_pn_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (268, 232) - (343, 307)
[Sun Jun 16 00:43:18 2013] XMMSAS bgd. selection expression = annulus(26552.769531, 23433.938477, 1087.500000, 2175.000000, X, Y) && !ellipse(26109.464000, 22928.812000, 423.228812, 423.228812, 0.000000, X, Y) && !ellipse(25073.567400, 23140.130200, 471.518414, 471.518414, 0.000000, X, Y) && !ellipse(28598.060730, 23599.301666, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 00:43:18 2013] Writing fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43.gif
[Sun Jun 16 00:43:21 2013] ../../xmm0109520601/products/events/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_src.evt and ../../xmm0109520601/products/events/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_bgd.evt exist, delete to re-create
[Sun Jun 16 00:43:22 2013] Mean detx,y = (89.26, 3976.95) 
[Sun Jun 16 00:43:22 2013] ../../xmm0109520601/products/images/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_src.img and ../../xmm0109520601/products/images/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_bgd.img exist, delete to re-create
[Sun Jun 16 00:43:22 2013] ../../xmm0109520601/products/spectra/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_bgd.pi exist, delete to re-create
[Sun Jun 16 00:43:22 2013] Setting source spectrum file to fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jun 16 00:43:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun Jun 16 00:43:22 2013] ../../xmm0109520601/products/lightcurves/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_bgd.lc exist, delete to re-create
[Sun Jun 16 00:43:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 00:43:36 2013] rmf not generated due to insufficient counts
[Sun Jun 16 00:43:36 2013] fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43.arf exists, delete to re-create
[Sun Jun 16 01:09:48 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:09:48 2013] Total counts from fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 774.00
[Sun Jun 16 01:09:48 2013] Total counts from fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_bgd.pi.gz = 1073.00
[Sun Jun 16 01:09:48 2013] Got source and background scale factors 1342400.000000, 9150400.000000
[Sun Jun 16 01:09:48 2013] User source parameters:
  Position = (305.8, 269.9) = 2 22 43.07 -4 33 13.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 616.6 +/- 28.8
  Background aperture counts = 157.4
  Rate = 0.03 +/- 0.002

[Sun Jun 16 01:09:48 2013] Updating counts from extracted products
[Sun Jun 16 01:09:48 2013] Set source signif. to 616.59/12.55 = 49.14
[Sun Jun 16 01:09:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:09:53 2013] Using photon index=1.80, rate=0.0325, arf fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43.arf
[Sun Jun 16 01:09:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:09:53 2013] Updating source flux to 9.8e-14
[Sun Jun 16 01:10:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 01:10:45 2013] xmm0109520601/analysis//spectral/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete