[Sun Jun 16 00:40:08 2013] Detection parameters:
  Position = (281.3, 341.8) = 2 22 50.17 -4 28 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.5 +/- 10.1
  Background counts = 15.9
  Rate = 0.004 +/- 0.0008

[Sun Jun 16 00:40:10 2013] Off-axis axis estimate = 3.38'
[Sun Jun 16 00:41:09 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:09 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Sun Jun 16 00:41:09 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.116
[Sun Jun 16 00:41:09 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.12"
[Sun Jun 16 00:41:10 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun 16 00:41:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src31.csv
[Sun Jun 16 00:41:10 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun 16 00:41:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src31.csv
[Sun Jun 16 00:41:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:12 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun 16 00:41:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun 16 00:41:12 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun 16 00:41:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun 16 00:41:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:33 2013] Spatial fit model total counts = 184.621000, observed total counts = 166.000000
[Sun Jun 16 00:41:33 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 00:41:33 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:33 2013] Assessing source extent using major
[Sun Jun 16 00:41:33 2013] Source does appear to be extended
[Sun Jun 16 00:41:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:14 2013] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:14 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Sun Jun 16 00:42:14 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.116
[Sun Jun 16 00:42:14 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 8.12"
[Sun Jun 16 00:42:15 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun 16 00:42:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src30.csv
[Sun Jun 16 00:42:15 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun 16 00:42:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src30.csv
[Sun Jun 16 00:42:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:16 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun 16 00:42:16 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sun Jun 16 00:42:16 2013] fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun 16 00:42:16 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sun Jun 16 00:42:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:34 2013] Source 32 is offset by -7.125854 and 1.538279 pixels which is larger than
2 X fitted extent = 1.121779 x 1.121779, not incorporating fit results
[Sun Jun 16 00:42:34 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:34 2013] Assessing source extent using major
[Sun Jun 16 00:42:34 2013] Source does appear to be extended
[Sun Jun 16 00:42:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:43:17 2013] XMMSAS src. selection expression = ellipse(24427.532745, 29686.580261, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 00:43:17 2013] Not overwriting source region fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_src.reg
[Sun Jun 16 00:43:17 2013] Extracting stamp from image fullrun_pn_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (244, 304) - (319, 379)
[Sun Jun 16 00:43:17 2013] XMMSAS bgd. selection expression = annulus(24427.532745, 29686.580261, 1087.500000, 2175.000000, X, Y) && !ellipse(23369.596497, 27961.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25938.387787, 29533.966522, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 00:43:17 2013] Writing fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32.gif
[Sun Jun 16 00:43:21 2013] ../../xmm0109520601/products/events/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_src.evt and ../../xmm0109520601/products/events/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_bgd.evt exist, delete to re-create
[Sun Jun 16 00:43:21 2013] Mean detx,y = (-3544.45, -1809.82) 
[Sun Jun 16 00:43:21 2013] ../../xmm0109520601/products/images/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_src.img and ../../xmm0109520601/products/images/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_bgd.img exist, delete to re-create
[Sun Jun 16 00:43:21 2013] ../../xmm0109520601/products/spectra/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_bgd.pi exist, delete to re-create
[Sun Jun 16 00:43:21 2013] Setting source spectrum file to fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Jun 16 00:43:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun Jun 16 00:43:21 2013] ../../xmm0109520601/products/lightcurves/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_bgd.lc exist, delete to re-create
[Sun Jun 16 00:43:36 2013] Not generating rmf since there are only 52 counts
[Sun Jun 16 00:43:36 2013] rmf not generated due to insufficient counts
[Sun Jun 16 00:43:36 2013] fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32.arf exists, delete to re-create
[Sun Jun 16 01:09:44 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:09:44 2013] Total counts from fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 131.00
[Sun Jun 16 01:09:44 2013] Total counts from fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_bgd.pi.gz = 538.00
[Sun Jun 16 01:09:44 2013] Got source and background scale factors 1101992.000000, 6346926.000000
[Sun Jun 16 01:09:44 2013] User source parameters:
  Position = (281.3, 341.8) = 2 22 50.17 -4 28 2.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.6 +/- 12.5
  Background aperture counts = 93.4
  Rate = 0.002 +/- 0.0007

[Sun Jun 16 01:09:44 2013] Updating counts from extracted products
[Sun Jun 16 01:09:44 2013] Set source signif. to 37.59/9.66 = 3.89
[Sun Jun 16 01:09:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:09:52 2013] Using photon index=1.80, rate=0.00198, arf fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32.arf
[Sun Jun 16 01:09:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:09:52 2013] Updating source flux to 6.6e-15
[Sun Jun 16 01:10:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 01:10:45 2013] xmm0109520601/analysis//spectral/fullrun_pn_xmm0109520601_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete