[Sun Jun 16 00:40:19 2013] Detection parameters:
  Position = (212.7, 410.4) = 2 23 10.15 -4 23 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.1 +/- 6.6
  Background counts = 4.5
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 00:40:23 2013] Off-axis axis estimate = 10.22'
[Sun Jun 16 00:41:14 2013] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:14 2013] Initial guess for spatial extent in simple fitting = 11.54"
[Sun Jun 16 00:41:14 2013] source mask rpix=2.7, npix_max = 39, mask sum = 48, frac = 1.207
[Sun Jun 16 00:41:14 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 11.54"
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src41.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src41.csv
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src41.csv
[Sun Jun 16 00:41:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:16 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Jun 16 00:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Jun 16 00:41:16 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Jun 16 00:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Jun 16 00:41:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:52 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.015406 pixels away
[Sun Jun 16 00:41:52 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:52 2013] Assessing source extent using major
[Sun Jun 16 00:41:52 2013] Source does appear to be extended
[Sun Jun 16 00:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:18 2013] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:18 2013] Initial guess for spatial extent in simple fitting = 11.54"
[Sun Jun 16 00:42:18 2013] source mask rpix=2.7, npix_max = 39, mask sum = 48, frac = 1.207
[Sun Jun 16 00:42:18 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 11.54"
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src38.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src38.csv
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src38.csv
[Sun Jun 16 00:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sun Jun 16 00:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:53 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.106955 pixels away
[Sun Jun 16 00:42:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:53 2013] Assessing source extent using major
[Sun Jun 16 00:42:53 2013] Source does appear to be extended
[Sun Jun 16 00:42:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:08:56 2013] XMMSAS src. selection expression = ellipse(18452.072037, 35654.194031, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 01:08:56 2013] Not overwriting source region fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_src.reg
[Sun Jun 16 01:08:56 2013] Extracting stamp from image fullrun_mos2_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (175, 373) - (250, 448)
[Sun Jun 16 01:08:56 2013] XMMSAS bgd. selection expression = annulus(18452.072037, 35654.194031, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 01:08:56 2013] Writing fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8.gif
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun Jun 16 01:08:57 2013] Mean detx,y = (11037.37, 5770.98) 
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_src.img and ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun Jun 16 01:08:57 2013] Setting source spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jun 16 01:08:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun Jun 16 01:09:07 2013] Not generating rmf since there are only 25 counts
[Sun Jun 16 01:09:07 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:09:07 2013] fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Sun Jun 16 01:10:24 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:10:24 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 54.00
[Sun Jun 16 01:10:24 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_bgd.pi.gz = 278.00
[Sun Jun 16 01:10:24 2013] Got source and background scale factors 1124828.000000, 9859313.000000
[Sun Jun 16 01:10:24 2013] User source parameters:
  Position = (212.7, 410.4) = 2 23 10.15 -4 23 3.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 22.3 +/- 8.4
  Background aperture counts = 31.7
  Rate = 0.001 +/- 0.0004

[Sun Jun 16 01:10:24 2013] Updating counts from extracted products
[Sun Jun 16 01:10:24 2013] Set source signif. to 22.28/5.63 = 3.96
[Sun Jun 16 01:10:27 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:27 2013] Using photon index=1.80, rate=0.000969, arf fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8.arf
[Sun Jun 16 01:10:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:27 2013] Updating source flux to 2.8e-14
[Sun Jun 16 01:10:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 01:10:40 2013] xmm0109520601/analysis//spectral/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete