[Sun Jun 16 00:40:18 2013] Detection parameters:
  Position = (336.9, 413.4) = 2 22 34.02 -4 22 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.5 +/- 8.2
  Background counts = 5.9
  Rate = 0.003 +/- 0.0006

[Sun Jun 16 00:40:23 2013] Off-axis axis estimate = 8.79'
[Sun Jun 16 00:41:14 2013] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:14 2013] Initial guess for spatial extent in simple fitting = 10.82"
[Sun Jun 16 00:41:14 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Sun Jun 16 00:41:14 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 10.82"
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src20.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src20.csv
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src20.csv
[Sun Jun 16 00:41:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:16 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Jun 16 00:41:16 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Jun 16 00:41:16 2013] Fit fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Jun 16 00:41:52 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.590607 pixels away
[Sun Jun 16 00:41:52 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:52 2013] Assessing source extent using major
[Sun Jun 16 00:41:52 2013] Source does appear to be extended
[Sun Jun 16 00:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:18 2013] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:18 2013] Initial guess for spatial extent in simple fitting = 10.82"
[Sun Jun 16 00:42:18 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Sun Jun 16 00:42:18 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 10.82"
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src19.csv
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src19.csv
[Sun Jun 16 00:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun 16 00:42:19 2013] Fit fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Jun 16 00:42:53 2013] Spatial fit model total counts = 81.064100, observed total counts = 81.000000
[Sun Jun 16 00:42:53 2013] Offset between fit and detection position for source 5 = 0.159062 pixels
[Sun Jun 16 00:42:53 2013] 79.518100 total counts/ 50.217800 bgd. counts: snr = 4.134693
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.159062 pixels
  Position = (336.8, 413.6) = 2 22 34.03 -4 22 50.5
  Extent = 7.0 (4.6-10.4)", rotation angle = 0
  Source counts = 29.3 +/- 8.9
  Background counts = 50.2
  Rate = 0.001 +/- 0.0004
[Sun Jun 16 00:42:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:53 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:42:53 2013] Source does appear to be extended
[Sun Jun 16 00:42:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:08:55 2013] XMMSAS src. selection expression = ellipse(29256.502500, 35930.743600, 421.011012, 421.011012, 0.000000, X, Y)
[Sun Jun 16 01:08:55 2013] Not overwriting source region fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 16 01:08:55 2013] Extracting stamp from image fullrun_mos2_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (313, 389) - (361, 438)
[Sun Jun 16 01:08:55 2013] XMMSAS bgd. selection expression = annulus(29256.502500, 35930.743600, 701.685020, 1403.370040, X, Y)
[Sun Jun 16 01:08:55 2013] Writing fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5.gif
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Jun 16 01:08:57 2013] Mean detx,y = (655.40, 8928.88) 
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_src.img and ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Jun 16 01:08:57 2013] Setting source spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 16 01:08:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Jun 16 01:09:07 2013] Not generating rmf since there are only 29 counts
[Sun Jun 16 01:09:07 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:09:07 2013] fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Sun Jun 16 01:10:15 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:10:15 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 43.00
[Sun Jun 16 01:10:15 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 141.00
[Sun Jun 16 01:10:15 2013] Got source and background scale factors 558400.000000, 4204646.000000
[Sun Jun 16 01:10:15 2013] User source parameters:
  Position = (336.8, 413.6) = 2 22 34.03 -4 22 50.5
  Extent = 7.0 (4.6-10.4)", rotation angle = 0
  Source aperture counts = 24.3 +/- 7.6
  Background aperture counts = 18.7
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 01:10:26 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:26 2013] Using photon index=1.80, rate=0.00127, arf fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5.arf
[Sun Jun 16 01:10:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:26 2013] Updating source flux to 2.5e-14
[Sun Jun 16 01:10:34 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 01:10:40 2013] xmm0109520601/analysis//spectral/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete