[Sun Jun 16 00:40:22 2013] Detection parameters:
  Position = (264.6, 242.4) = 2 22 55.05 -4 35 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.6 +/- 7.4
  Background counts = 5.8
  Rate = 0.003 +/- 0.0005

[Sun Jun 16 00:40:23 2013] Off-axis axis estimate = 4.75'
[Sun Jun 16 00:41:14 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:14 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Sun Jun 16 00:41:14 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.942
[Sun Jun 16 00:41:14 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 8.80"
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src23.csv
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src23.csv
[Sun Jun 16 00:41:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:16 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jun 16 00:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jun 16 00:41:16 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jun 16 00:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jun 16 00:41:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:52 2013] Spatial fit model total counts = 100.561000, observed total counts = 85.000000
[Sun Jun 16 00:41:52 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 00:41:52 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:52 2013] Assessing source extent using major
[Sun Jun 16 00:41:52 2013] Source does appear to be extended
[Sun Jun 16 00:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:18 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:18 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Sun Jun 16 00:42:18 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.942
[Sun Jun 16 00:42:18 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 8.80"
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src22.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src22.csv
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src22.csv
[Sun Jun 16 00:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Jun 16 00:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:53 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 12.309833 pixels away
[Sun Jun 16 00:42:53 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 59.228207 pixels away
[Sun Jun 16 00:42:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:53 2013] Assessing source extent using major
[Sun Jun 16 00:42:53 2013] Source does appear to be extended
[Sun Jun 16 00:42:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:08:55 2013] XMMSAS src. selection expression = ellipse(22970.909332, 21037.765244, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 01:08:55 2013] Not overwriting source region fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_src.reg
[Sun Jun 16 01:08:55 2013] Extracting stamp from image fullrun_mos2_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (227, 205) - (302, 280)
[Sun Jun 16 01:08:55 2013] XMMSAS bgd. selection expression = annulus(22970.909332, 21037.765244, 1087.500000, 2175.000000, X, Y) && !ellipse(25182.046400, 23086.317800, 1218.792035, 351.863210, 19.703146, X, Y) && !ellipse(25592.958000, 22978.590000, 1570.656045, 771.566422, 0.000000, X, Y)
[Sun Jun 16 01:08:55 2013] Writing fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34.gif
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_src.evt and ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_bgd.evt exist, delete to re-create
[Sun Jun 16 01:08:57 2013] Mean detx,y = (2734.17, -7185.36) 
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_src.img and ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_bgd.img exist, delete to re-create
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_bgd.pi exist, delete to re-create
[Sun Jun 16 01:08:57 2013] Setting source spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Jun 16 01:08:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_bgd.lc exist, delete to re-create
[Sun Jun 16 01:09:07 2013] Not generating rmf since there are only 36 counts
[Sun Jun 16 01:09:07 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:09:07 2013] fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34.arf exists, delete to re-create
[Sun Jun 16 01:10:19 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:10:19 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 64.00
[Sun Jun 16 01:10:19 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_bgd.pi.gz = 293.00
[Sun Jun 16 01:10:19 2013] Got source and background scale factors 1016872.000000, 10020299.000000
[Sun Jun 16 01:10:19 2013] User source parameters:
  Position = (264.6, 242.4) = 2 22 55.05 -4 35 11.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 34.3 +/- 9.0
  Background aperture counts = 29.7
  Rate = 0.001 +/- 0.0004

[Sun Jun 16 01:10:19 2013] Updating counts from extracted products
[Sun Jun 16 01:10:19 2013] Set source signif. to 34.27/5.45 = 6.28
[Sun Jun 16 01:10:26 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:26 2013] Using photon index=1.80, rate=0.00149, arf fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34.arf
[Sun Jun 16 01:10:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:26 2013] Updating source flux to 2.3e-14
[Sun Jun 16 01:10:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 01:10:40 2013] xmm0109520601/analysis//spectral/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete