[Sun Jun 16 00:40:21 2013] Detection parameters:
  Position = (305.7, 269.9) = 2 22 43.09 -4 33 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 12.4
  Background counts = 6.9
  Rate = 0.004 +/- 0.0006

[Sun Jun 16 00:40:23 2013] Off-axis axis estimate = 2.14'
[Sun Jun 16 00:41:14 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:14 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Sun Jun 16 00:41:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Sun Jun 16 00:41:14 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.50"
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src8.csv
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src8.csv
[Sun Jun 16 00:41:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jun 16 00:41:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:52 2013] Warning, spatial fit 8 centroid is now closest to src. 30
[Sun Jun 16 00:41:52 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:52 2013] Assessing source extent using major
[Sun Jun 16 00:41:52 2013] Source does appear to be extended
[Sun Jun 16 00:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:18 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:18 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Sun Jun 16 00:42:18 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Sun Jun 16 00:42:18 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.50"
[Sun Jun 16 00:42:18 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src7.ximg exists
[Sun Jun 16 00:42:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src7.csv
[Sun Jun 16 00:42:18 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Jun 16 00:42:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src7.csv
[Sun Jun 16 00:42:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Jun 16 00:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:53 2013] Source 28 is offset by 4.851953 and 5.768266 pixels which is larger than
2 X fitted extent = 2.109876 x 2.109876, not incorporating fit results
[Sun Jun 16 00:42:53 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 43.214225 pixels away
[Sun Jun 16 00:42:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:53 2013] Assessing source extent using major
[Sun Jun 16 00:42:53 2013] Source does appear to be extended
[Sun Jun 16 00:42:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:53 2013] Source is confused with source 30
[Sun Jun 16 01:08:55 2013] XMMSAS src. selection expression = ellipse(26546.747925, 23430.593140, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 01:08:55 2013] Not overwriting source region fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_src.reg
[Sun Jun 16 01:08:55 2013] Extracting stamp from image fullrun_mos2_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (268, 232) - (343, 307)
[Sun Jun 16 01:08:55 2013] XMMSAS bgd. selection expression = annulus(26546.747925, 23430.593140, 1087.500000, 2175.000000, X, Y) && !ellipse(26130.674000, 22779.766400, 326.122409, 326.122409, 0.000000, X, Y) && !ellipse(25182.046400, 23086.317800, 1218.792035, 351.863210, 19.703146, X, Y) && !ellipse(25592.958000, 22978.590000, 1570.656045, 771.566422, 0.000000, X, Y) && !ellipse(28648.901886, 23552.663422, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 01:08:55 2013] Writing fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28.gif
[Sun Jun 16 01:08:56 2013] ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sun Jun 16 01:08:56 2013] Mean detx,y = (-14.35, -4137.37) 
[Sun Jun 16 01:08:56 2013] ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_src.img and ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Sun Jun 16 01:08:56 2013] ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sun Jun 16 01:08:56 2013] Setting source spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Jun 16 01:08:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Jun 16 01:08:56 2013] ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sun Jun 16 01:09:07 2013] Not generating rmf since there are only 87 counts
[Sun Jun 16 01:09:07 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:09:07 2013] fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Sun Jun 16 01:10:07 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:10:08 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 302.00
[Sun Jun 16 01:10:08 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_bgd.pi.gz = 335.00
[Sun Jun 16 01:10:08 2013] Got source and background scale factors 1155132.000000, 7808188.000000
[Sun Jun 16 01:10:08 2013] User source parameters:
  Position = (305.7, 269.9) = 2 22 43.09 -4 33 14.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 252.4 +/- 18.4
  Background aperture counts = 49.6
  Rate = 0.01 +/- 0.0008

[Sun Jun 16 01:10:08 2013] Updating counts from extracted products
[Sun Jun 16 01:10:08 2013] Set source signif. to 252.44/7.04 = 35.86
[Sun Jun 16 01:10:25 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:25 2013] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28.arf
[Sun Jun 16 01:10:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:25 2013] Updating source flux to 1.1e-13
[Sun Jun 16 01:10:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 01:10:40 2013] xmm0109520601/analysis//spectral/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete