[Sun Jun 16 00:40:21 2013] Detection parameters:
  Position = (239.7, 286.0) = 2 23 2.27 -4 32 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.8 +/- 8.4
  Background counts = 5.7
  Rate = 0.002 +/- 0.0005

[Sun Jun 16 00:40:23 2013] Off-axis axis estimate = 4.35'
[Sun Jun 16 00:41:14 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:14 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Sun Jun 16 00:41:14 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Sun Jun 16 00:41:14 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 8.60"
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src25.csv
[Sun Jun 16 00:41:15 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun 16 00:41:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src25.csv
[Sun Jun 16 00:41:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:16 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun 16 00:41:16 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun 16 00:41:16 2013] Fit fullrun_mos2_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Jun 16 00:41:52 2013] Spatial fit model total counts = 79.999500, observed total counts = 79.000000
[Sun Jun 16 00:41:52 2013] Offset between fit and detection position for source 24 = 0.327770 pixels
[Sun Jun 16 00:41:52 2013] 81.239500 total counts/ 48.692300 bgd. counts: snr = 4.664268
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.327770 pixels
  Position = (240.0, 285.8) = 2 23 2.19 -4 32 6.2
  Extent = 6.6 (3.5-9.0)", rotation angle = 0
  Source counts = 32.5 +/- 9.0
  Background counts = 48.7
  Rate = 0.001 +/- 0.0004
[Sun Jun 16 00:41:52 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:52 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:41:52 2013] Source does appear to be extended
[Sun Jun 16 00:41:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:18 2013] Initial guess for spatial extent in simple fitting = 6.58"
[Sun Jun 16 00:42:18 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.987
[Sun Jun 16 00:42:18 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 6.58"
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src24.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src24.csv
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Jun 16 00:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src24.csv
[Sun Jun 16 00:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Jun 16 00:42:19 2013] fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Jun 16 00:42:19 2013] Fit fullrun_mos2_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sun Jun 16 00:42:53 2013] Warning, spatial fit 24 centroid is now closest to src. 34
[Sun Jun 16 00:42:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:53 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:42:53 2013] Source does appear to be extended
[Sun Jun 16 00:42:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 01:08:55 2013] XMMSAS src. selection expression = ellipse(20834.605200, 24817.555000, 395.059211, 395.059211, 0.000000, X, Y)
[Sun Jun 16 01:08:55 2013] Not overwriting source region fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_src.reg
[Sun Jun 16 01:08:55 2013] Extracting stamp from image fullrun_mos2_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (217, 263) - (263, 309)
[Sun Jun 16 01:08:55 2013] XMMSAS bgd. selection expression = annulus(20834.605200, 24817.555000, 658.432019, 1316.864038, X, Y)
[Sun Jun 16 01:08:55 2013] Writing fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24.gif
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0109520601/products/events/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Sun Jun 16 01:08:57 2013] Mean detx,y = (5751.75, -4042.69) 
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_src.img and ../../xmm0109520601/products/images/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Sun Jun 16 01:08:57 2013] Setting source spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jun 16 01:08:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Jun 16 01:08:57 2013] ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Sun Jun 16 01:09:07 2013] Not generating rmf since there are only 32 counts
[Sun Jun 16 01:09:07 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:09:07 2013] fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24.arf exists, delete to re-create
[Sun Jun 16 01:10:20 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:10:20 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 48.00
[Sun Jun 16 01:10:20 2013] Total counts from fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_bgd.pi.gz = 107.00
[Sun Jun 16 01:10:20 2013] Got source and background scale factors 494400.000000, 3575450.000000
[Sun Jun 16 01:10:20 2013] User source parameters:
  Position = (240.0, 285.8) = 2 23 2.19 -4 32 6.2
  Extent = 6.6 (3.5-9.0)", rotation angle = 0
  Source aperture counts = 33.2 +/- 8.0
  Background aperture counts = 14.8
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 01:10:26 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:26 2013] Using photon index=1.80, rate=0.00141, arf fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24.arf
[Sun Jun 16 01:10:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:26 2013] Updating source flux to 2.2e-14
[Sun Jun 16 01:10:34 2013] Source 24 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 01:10:40 2013] xmm0109520601/analysis//spectral/fullrun_mos2_xmm0109520601_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete