[Sun Jun 16 00:40:11 2013] Detection parameters:
  Position = (315.4, 165.1) = 2 22 40.27 -4 40 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.6 +/- 9.2
  Background counts = 5.4
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 00:40:17 2013] Off-axis axis estimate = 9.74'
[Sun Jun 16 00:41:12 2013] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:12 2013] Initial guess for spatial extent in simple fitting = 11.30"
[Sun Jun 16 00:41:12 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Sun Jun 16 00:41:12 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 11.30"
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src24.csv
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src24.csv
[Sun Jun 16 00:41:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 16 00:41:14 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sun Jun 16 00:41:41 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.598419 pixels away
[Sun Jun 16 00:41:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:41 2013] Assessing source extent using major
[Sun Jun 16 00:41:41 2013] Source does appear to be extended
[Sun Jun 16 00:41:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:16 2013] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:16 2013] Initial guess for spatial extent in simple fitting = 11.30"
[Sun Jun 16 00:42:16 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Sun Jun 16 00:42:16 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 11.30"
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src24.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src24.csv
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src24.csv
[Sun Jun 16 00:42:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:18 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Jun 16 00:42:18 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Jun 16 00:42:18 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sun Jun 16 00:42:42 2013] Spatial fit model total counts = 100.991000, observed total counts = 101.000000
[Sun Jun 16 00:42:42 2013] Offset between fit and detection position for source 5 = 0.217857 pixels
[Sun Jun 16 00:42:42 2013] 100.979300 total counts/ 68.555400 bgd. counts: snr = 3.916016
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.217857 pixels
  Position = (315.6, 165.2) = 2 22 40.21 -4 40 51.1
  Extent = 5.1 (3.1-7.7)", rotation angle = 0
  Source counts = 32.4 +/- 10.0
  Background counts = 68.6
  Rate = 0.001 +/- 0.0004
[Sun Jun 16 00:42:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:42 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:42:42 2013] Source does appear to be extended
[Sun Jun 16 00:42:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:43:36 2013] XMMSAS src. selection expression = ellipse(27407.420800, 14319.716000, 305.139609, 305.139609, 0.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Not overwriting source region fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 16 00:43:36 2013] Extracting stamp from image fullrun_mos1_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (298, 148) - (333, 183)
[Sun Jun 16 00:43:36 2013] XMMSAS bgd. selection expression = annulus(27407.420800, 14319.716000, 508.566015, 1017.132029, X, Y)
[Sun Jun 16 00:43:36 2013] Writing fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src5.gif
[Sun Jun 16 00:51:35 2013] Mean detx,y = (-12203.81, 3104.56) 
[Sun Jun 16 00:51:37 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 00:51:52 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 00:51:53 2013] Setting source spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 16 00:51:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 16 01:07:29 2013] Not generating rmf since there are only 32 counts
[Sun Jun 16 01:07:29 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:10:00 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:10:00 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 43.00
[Sun Jun 16 01:10:00 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src5_bgd.pi.gz = 62.00
[Sun Jun 16 01:10:00 2013] Got source and background scale factors 289600.000000, 2358916.000000
[Sun Jun 16 01:10:00 2013] User source parameters:
  Position = (315.6, 165.2) = 2 22 40.21 -4 40 51.1
  Extent = 5.1 (3.1-7.7)", rotation angle = 0
  Source aperture counts = 35.4 +/- 7.6
  Background aperture counts = 7.6
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 01:10:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:03 2013] Using photon index=1.80, rate=0.00141, arf fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src5.arf
[Sun Jun 16 01:10:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:03 2013] Updating source flux to 3.1e-14
[Sun Jun 16 01:10:30 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 01:10:34 2013] xmm0109520601/analysis//spectral/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete