[Sun Jun 16 00:40:11 2013] Detection parameters:
  Position = (212.8, 409.9) = 2 23 10.09 -4 23 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 9.2
  Background counts = 5.1
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 00:40:17 2013] Off-axis axis estimate = 10.19'
[Sun Jun 16 00:41:12 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:12 2013] Initial guess for spatial extent in simple fitting = 11.52"
[Sun Jun 16 00:41:12 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908
[Sun Jun 16 00:41:12 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 11.52"
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src25.csv
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src25.csv
[Sun Jun 16 00:41:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun 16 00:41:14 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Jun 16 00:41:41 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.390995 pixels away
[Sun Jun 16 00:41:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:41 2013] Assessing source extent using major
[Sun Jun 16 00:41:41 2013] Source does appear to be extended
[Sun Jun 16 00:41:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:16 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 00:42:16 2013] Initial guess for spatial extent in simple fitting = 11.52"
[Sun Jun 16 00:42:16 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908
[Sun Jun 16 00:42:16 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.52"
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src25.csv
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src25.csv
[Sun Jun 16 00:42:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:18 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jun 16 00:42:18 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jun 16 00:42:18 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Jun 16 00:42:42 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.486212 pixels away
[Sun Jun 16 00:42:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:42 2013] Assessing source extent using major
[Sun Jun 16 00:42:42 2013] Source does appear to be extended
[Sun Jun 16 00:42:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:43:36 2013] XMMSAS src. selection expression = ellipse(18469.258041, 35610.970154, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Not overwriting source region fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 16 00:43:36 2013] Extracting stamp from image fullrun_mos1_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (175, 372) - (250, 447)
[Sun Jun 16 00:43:36 2013] XMMSAS bgd. selection expression = annulus(18469.258041, 35610.970154, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Writing fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src4.gif
[Sun Jun 16 00:51:57 2013] Mean detx,y = (5965.49, -11088.57) 
[Sun Jun 16 00:51:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 00:52:10 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 00:52:10 2013] Setting source spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 16 00:52:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 16 01:07:39 2013] Not generating rmf since there are only 49 counts
[Sun Jun 16 01:07:39 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:10:00 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:10:00 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 75.00
[Sun Jun 16 01:10:00 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src4_bgd.pi.gz = 327.00
[Sun Jun 16 01:10:00 2013] Got source and background scale factors 1345600.000000, 11123980.000000
[Sun Jun 16 01:10:00 2013] User source parameters:
  Position = (212.8, 409.9) = 2 23 10.09 -4 23 5.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 35.4 +/- 9.7
  Background aperture counts = 39.6
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 01:10:00 2013] Updating counts from extracted products
[Sun Jun 16 01:10:00 2013] Set source signif. to 35.44/6.29 = 5.64
[Sun Jun 16 01:10:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:03 2013] Using photon index=1.80, rate=0.00154, arf fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src4.arf
[Sun Jun 16 01:10:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:03 2013] Updating source flux to 3.3e-14
[Sun Jun 16 01:10:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 01:10:34 2013] xmm0109520601/analysis//spectral/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete