[Sun Jun 16 00:40:17 2013] Detection parameters:
  Position = (335.1, 216.5) = 2 22 34.53 -4 37 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.7 +/- 9.3
  Background counts = 6.4
  Rate = 0.003 +/- 0.0006

[Sun Jun 16 00:40:17 2013] Off-axis axis estimate = 6.51'
[Sun Jun 16 00:41:12 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:12 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Sun Jun 16 00:41:12 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Sun Jun 16 00:41:12 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.68"
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src18.csv
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src18.csv
[Sun Jun 16 00:41:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jun 16 00:41:14 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Jun 16 00:41:41 2013] Spatial fit model total counts = 98.009800, observed total counts = 98.000000
[Sun Jun 16 00:41:41 2013] Offset between fit and detection position for source 33 = 0.213481 pixels
[Sun Jun 16 00:41:41 2013] 98.796700 total counts/ 52.277300 bgd. counts: snr = 6.433948
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.213481 pixels
  Position = (334.9, 216.5) = 2 22 34.59 -4 37 7.6
  Extent = 7.9 (5.5-11.3)", rotation angle = 0
  Source counts = 46.5 +/- 9.9
  Background counts = 52.3
  Rate = 0.002 +/- 0.0004
[Sun Jun 16 00:41:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:41 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:41:41 2013] Source does appear to be extended
[Sun Jun 16 00:41:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:16 2013] Initial guess for spatial extent in simple fitting = 7.87"
[Sun Jun 16 00:42:16 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.937
[Sun Jun 16 00:42:16 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 7.87"
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src18.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src18.csv
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src18.csv
[Sun Jun 16 00:42:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:18 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Jun 16 00:42:18 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Jun 16 00:42:18 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Jun 16 00:42:42 2013] Spatial fit model total counts = 97.631500, observed total counts = 98.000000
[Sun Jun 16 00:42:42 2013] Offset between fit and detection position for source 33 = 0.009997 pixels
[Sun Jun 16 00:42:42 2013] 98.374100 total counts/ 51.745200 bgd. counts: snr = 6.482166
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.009997 pixels
  Position = (334.9, 216.5) = 2 22 34.59 -4 37 7.6
  Extent = 8.0 (5.5-11.3)", rotation angle = 0
  Source counts = 46.6 +/- 9.9
  Background counts = 51.7
  Rate = 0.002 +/- 0.0004
[Sun Jun 16 00:42:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:42 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:42:42 2013] Source does appear to be extended
[Sun Jun 16 00:42:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:43:36 2013] XMMSAS src. selection expression = ellipse(29086.756760, 18788.487000, 478.944014, 478.944014, 0.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Not overwriting source region fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src33_src.reg
[Sun Jun 16 00:43:36 2013] Extracting stamp from image fullrun_mos1_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (307, 189) - (362, 244)
[Sun Jun 16 00:43:36 2013] XMMSAS bgd. selection expression = annulus(29086.756760, 18788.487000, 798.240023, 1596.480046, X, Y)
[Sun Jun 16 00:43:36 2013] Writing fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src33.gif
[Sun Jun 16 00:48:59 2013] Mean detx,y = (-7450.18, 3545.54) 
[Sun Jun 16 00:49:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 00:49:20 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 00:49:20 2013] Setting source spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jun 16 00:49:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jun 16 01:06:43 2013] Not generating rmf since there are only 46 counts
[Sun Jun 16 01:06:43 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:09:58 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:09:58 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 65.00
[Sun Jun 16 01:09:58 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src33_bgd.pi.gz = 160.00
[Sun Jun 16 01:09:58 2013] Got source and background scale factors 724800.000000, 5554054.000000
[Sun Jun 16 01:09:58 2013] User source parameters:
  Position = (334.9, 216.5) = 2 22 34.59 -4 37 7.6
  Extent = 8.0 (5.5-11.3)", rotation angle = 0
  Source aperture counts = 44.1 +/- 9.1
  Background aperture counts = 20.9
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 01:10:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:03 2013] Using photon index=1.80, rate=0.00203, arf fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src33.arf
[Sun Jun 16 01:10:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:03 2013] Updating source flux to 2.8e-14
[Sun Jun 16 01:10:30 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 01:10:34 2013] xmm0109520601/analysis//spectral/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete