[Sun Jun 16 00:40:14 2013] Detection parameters:
  Position = (280.5, 412.1) = 2 22 50.42 -4 22 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 8.9
  Background counts = 5.0
  Rate = 0.004 +/- 0.0007

[Sun Jun 16 00:40:17 2013] Off-axis axis estimate = 8.34'
[Sun Jun 16 00:41:12 2013] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:12 2013] Initial guess for spatial extent in simple fitting = 10.60"
[Sun Jun 16 00:41:12 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.870
[Sun Jun 16 00:41:12 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.60"
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src11.csv
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src11.csv
[Sun Jun 16 00:41:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jun 16 00:41:14 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jun 16 00:41:41 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 12.819385 pixels away
[Sun Jun 16 00:41:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:41 2013] Assessing source extent using major
[Sun Jun 16 00:41:41 2013] Source does appear to be extended
[Sun Jun 16 00:41:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:16 2013] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:16 2013] Initial guess for spatial extent in simple fitting = 10.60"
[Sun Jun 16 00:42:16 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.870
[Sun Jun 16 00:42:16 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.60"
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src11.csv
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src11.csv
[Sun Jun 16 00:42:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 16 00:42:17 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jun 16 00:42:42 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 12.819385 pixels away
[Sun Jun 16 00:42:42 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 55.438052 pixels away
[Sun Jun 16 00:42:42 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 65.849644 pixels away
[Sun Jun 16 00:42:42 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 105.241317 pixels away
[Sun Jun 16 00:42:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:42 2013] Assessing source extent using major
[Sun Jun 16 00:42:42 2013] Source does appear to be extended
[Sun Jun 16 00:42:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:43:36 2013] XMMSAS src. selection expression = ellipse(24354.253937, 35806.043121, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Not overwriting source region fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src18_src.reg
[Sun Jun 16 00:43:36 2013] Extracting stamp from image fullrun_mos1_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (243, 375) - (318, 450)
[Sun Jun 16 00:43:36 2013] XMMSAS bgd. selection expression = annulus(24354.253937, 35806.043121, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Writing fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src18.gif
[Sun Jun 16 00:45:26 2013] Mean detx,y = (7701.87, -5463.89) 
[Sun Jun 16 00:45:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 00:46:25 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 00:46:25 2013] Setting source spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun 16 00:46:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun 16 01:05:42 2013] Not generating rmf since there are only 45 counts
[Sun Jun 16 01:05:42 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:09:56 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:09:56 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 82.00
[Sun Jun 16 01:09:56 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src18_bgd.pi.gz = 264.00
[Sun Jun 16 01:09:56 2013] Got source and background scale factors 1345600.000000, 9470870.000000
[Sun Jun 16 01:09:56 2013] User source parameters:
  Position = (280.5, 412.1) = 2 22 50.42 -4 22 55.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 44.5 +/- 10.1
  Background aperture counts = 37.5
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 01:09:56 2013] Updating counts from extracted products
[Sun Jun 16 01:09:56 2013] Set source signif. to 44.49/6.12 = 7.26
[Sun Jun 16 01:10:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:03 2013] Using photon index=1.80, rate=0.00194, arf fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src18.arf
[Sun Jun 16 01:10:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:03 2013] Updating source flux to 3e-14
[Sun Jun 16 01:10:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 01:10:34 2013] xmm0109520601/analysis//spectral/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete