[Sun Jun 16 00:40:13 2013] Detection parameters:
  Position = (456.0, 306.1) = 2 21 59.35 -4 30 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 11.0
  Background counts = 6.0
  Rate = 0.006 +/- 0.0009

[Sun Jun 16 00:40:17 2013] Off-axis axis estimate = 11.44'
[Sun Jun 16 00:41:12 2013] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:12 2013] Initial guess for spatial extent in simple fitting = 12.15"
[Sun Jun 16 00:41:12 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830
[Sun Jun 16 00:41:12 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.15"
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src5.csv
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src5.csv
[Sun Jun 16 00:41:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 16 00:41:14 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun 16 00:41:41 2013] Spatial fit model total counts = 114.000000, observed total counts = 114.000000
[Sun Jun 16 00:41:41 2013] Offset between fit and detection position for source 11 = 0.168023 pixels
[Sun Jun 16 00:41:41 2013] 116.002000 total counts/ 61.545000 bgd. counts: snr = 6.941564
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.168023 pixels
  Position = (455.9, 306.1) = 2 21 59.40 -4 30 37.7
  Extent = 5.6 (4.7-7.1)", rotation angle = 0
  Source counts = 54.5 +/- 10.8
  Background counts = 61.5
  Rate = 0.002 +/- 0.0005
[Sun Jun 16 00:41:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:41 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:41:41 2013] Source does appear to be extended
[Sun Jun 16 00:41:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:42:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:16 2013] Initial guess for spatial extent in simple fitting = 5.62"
[Sun Jun 16 00:42:16 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.245
[Sun Jun 16 00:42:16 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 5.62"
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src5.csv
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src5.csv
[Sun Jun 16 00:42:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 16 00:42:17 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 16 00:42:42 2013] Spatial fit model total counts = 104.894000, observed total counts = 105.000000
[Sun Jun 16 00:42:42 2013] Offset between fit and detection position for source 11 = 0.019902 pixels
[Sun Jun 16 00:42:42 2013] 106.096900 total counts/ 49.921000 bgd. counts: snr = 7.950756
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.019902 pixels
  Position = (455.9, 306.1) = 2 21 59.40 -4 30 37.8
  Extent = 5.9 (4.8-7.2)", rotation angle = 0
  Source counts = 56.2 +/- 10.3
  Background counts = 49.9
  Rate = 0.002 +/- 0.0004
[Sun Jun 16 00:42:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:42 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:42:42 2013] Source does appear to be extended
[Sun Jun 16 00:42:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:43:36 2013] XMMSAS src. selection expression = ellipse(39612.646400, 26583.214000, 351.704410, 351.704410, 0.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Not overwriting source region fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 16 00:43:36 2013] Extracting stamp from image fullrun_mos1_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (436, 286) - (476, 326)
[Sun Jun 16 00:43:36 2013] XMMSAS bgd. selection expression = annulus(39612.646400, 26583.214000, 586.174017, 1172.348034, X, Y)
[Sun Jun 16 00:43:36 2013] Writing fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11.gif
[Sun Jun 16 00:43:37 2013] ../../xmm0109520601/products/events/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0109520601/products/events/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Jun 16 00:43:37 2013] Mean detx,y = (2827.35, 11671.03) 
[Sun Jun 16 00:43:37 2013] ../../xmm0109520601/products/images/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_src.img and ../../xmm0109520601/products/images/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Jun 16 00:43:37 2013] ../../xmm0109520601/products/spectra/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sun Jun 16 00:43:37 2013] Setting source spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 16 00:43:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 16 00:43:37 2013] ../../xmm0109520601/products/lightcurves/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Jun 16 01:04:35 2013] Not generating rmf since there are only 56 counts
[Sun Jun 16 01:04:35 2013] rmf not generated due to insufficient counts
[Sun Jun 16 01:09:54 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:09:54 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 63.00
[Sun Jun 16 01:09:54 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_bgd.pi.gz = 103.00
[Sun Jun 16 01:09:54 2013] Got source and background scale factors 364788.000000, 3171448.000000
[Sun Jun 16 01:09:54 2013] User source parameters:
  Position = (455.9, 306.1) = 2 21 59.40 -4 30 37.8
  Extent = 5.9 (4.8-7.2)", rotation angle = 0
  Source aperture counts = 51.2 +/- 9.0
  Background aperture counts = 11.8
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 01:10:02 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:02 2013] Using photon index=1.80, rate=0.00245, arf fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11.arf
[Sun Jun 16 01:10:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:02 2013] Updating source flux to 4.5e-14
[Sun Jun 16 01:10:30 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 01:10:34 2013] xmm0109520601/analysis//spectral/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete