[Sun Jun 16 00:40:11 2013] Detection parameters:
  Position = (300.8, 262.8) = 2 22 44.51 -4 33 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1278.0 +/- 43.4
  Background counts = 6.7
  Rate = 0.07 +/- 0.002

[Sun Jun 16 00:40:17 2013] Off-axis axis estimate = 2.59'
[Sun Jun 16 00:41:12 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:41:12 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Jun 16 00:41:12 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.772
[Sun Jun 16 00:41:12 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.72"
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src1.csv
[Sun Jun 16 00:41:13 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 16 00:41:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src1.csv
[Sun Jun 16 00:41:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 16 00:41:14 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 16 00:41:14 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 16 00:41:41 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.477667 pixels away
[Sun Jun 16 00:41:41 2013] Spatial fit model total counts = 757.096000, observed total counts = 750.000000
[Sun Jun 16 00:41:41 2013] Offset between fit and detection position for source 1 = 2.142641 pixels
[Sun Jun 16 00:41:41 2013] Warning, changing simple spatial fit ID from 1 to 8
[Sun Jun 16 00:41:41 2013] 742.391000 total counts/ 231.688000 bgd. counts: snr = 33.551863
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.142641 pixels
  Position = (299.1, 264.1) = 2 22 45.01 -4 33 40.6
  Extent = 15.0 (14.4-30.0)" x 3.2 (2.9-3.4)", rotation angle = 204 (202-207) degrees
  Source counts = 510.7 +/- 27.2
  Background counts = 231.7
  Rate = 0.02 +/- 0.001
[Sun Jun 16 00:41:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:41:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:41:41 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:41:41 2013] Source does appear to be extended
[Sun Jun 16 00:41:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.24
[Sun Jun 16 00:41:41 2013] Source is asymmetric
[Sun Jun 16 00:41:41 2013] Source is confused with source 13
[Sun Jun 16 00:41:41 2013] Source is confused with source 29
[Sun Jun 16 00:42:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 00:42:16 2013] Initial guess for spatial extent in simple fitting = 9.08"
[Sun Jun 16 00:42:16 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.934
[Sun Jun 16 00:42:16 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.08"
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src1.csv
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 16 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src1.csv
[Sun Jun 16 00:42:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 16 00:42:17 2013] fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 16 00:42:17 2013] Fit fullrun_mos1_xmm0109520601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 16 00:42:42 2013] Warning, spatial fit 1 centroid is now closest to src. 13
[Sun Jun 16 00:42:42 2013] Spatial fit model total counts = 747.245000, observed total counts = 750.000000
[Sun Jun 16 00:42:42 2013] Offset between fit and detection position for source 1 = 1.607770 pixels
[Sun Jun 16 00:42:42 2013] Warning, changing simple spatial fit ID from 1 to 8
[Sun Jun 16 00:42:42 2013] 733.348000 total counts/ 228.095000 bgd. counts: snr = 33.454228
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.607770 pixels
  Position = (300.7, 264.1) = 2 22 44.54 -4 33 40.6
  Extent = 5.2 (4.9-5.6)", rotation angle = 0
  Source counts = 505.3 +/- 27.1
  Background counts = 228.1
  Rate = 0.02 +/- 0.001
[Sun Jun 16 00:42:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 00:42:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 00:42:42 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 00:42:42 2013] Source does appear to be extended
[Sun Jun 16 00:42:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 00:43:36 2013] XMMSAS src. selection expression = ellipse(26113.640000, 22928.764000, 314.985009, 314.985009, 0.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Not overwriting source region fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 16 00:43:36 2013] Extracting stamp from image fullrun_mos1_xmm0109520601_pi300-10000_cl_sm2.00.img.gz, (283, 246) - (319, 282)
[Sun Jun 16 00:43:36 2013] XMMSAS bgd. selection expression = annulus(26113.640000, 22928.764000, 524.975015, 1049.950030, X, Y) && !ellipse(26588.147797, 23441.842499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.125460, 23149.831600, 363.135210, 363.135210, 0.000000, X, Y)
[Sun Jun 16 00:43:36 2013] Writing fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1.gif
[Sun Jun 16 00:43:36 2013] ../../xmm0109520601/products/events/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0109520601/products/events/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Jun 16 00:43:37 2013] Mean detx,y = (-4337.65, -362.14) 
[Sun Jun 16 00:43:37 2013] ../../xmm0109520601/products/images/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_src.img and ../../xmm0109520601/products/images/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Jun 16 00:43:37 2013] ../../xmm0109520601/products/spectra/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0109520601/products/spectra/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Jun 16 00:43:37 2013] Setting source spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 16 00:43:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 16 00:43:37 2013] ../../xmm0109520601/products/lightcurves/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0109520601/products/lightcurves/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Jun 16 01:09:53 2013] Updating aperture counts using extracted products
[Sun Jun 16 01:09:53 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 883.00
[Sun Jun 16 01:09:53 2013] Total counts from fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 118.00
[Sun Jun 16 01:09:53 2013] Got source and background scale factors 316800.000000, 1388800.000000
[Sun Jun 16 01:09:53 2013] User source parameters:
  Position = (300.7, 264.1) = 2 22 44.54 -4 33 40.6
  Extent = 5.2 (4.9-5.6)", rotation angle = 0
  Source aperture counts = 856.1 +/- 30.7
  Background aperture counts = 26.9
  Rate = 0.04 +/- 0.001

[Sun Jun 16 01:10:02 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 01:10:02 2013] Using photon index=1.80, rate=0.022, arf fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1.arf
[Sun Jun 16 01:10:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 01:10:02 2013] Updating source flux to 2.9e-13
[Sun Jun 16 01:10:30 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jun 16 01:10:34 2013] xmm0109520601/analysis//spectral/fullrun_mos1_xmm0109520601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete