[Tue Mar 13 09:57:37 2012] Detection parameters:
  Position = (258.0, 483.4) = 2 23 25.75 -4 35 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.9 +/- 7.2
  Background counts = 3.8
  Rate = 0.001 +/- 0.0003

[Tue Mar 13 09:57:37 2012] Off-axis axis estimate = 13.73'
[Tue Mar 13 09:58:27 2012] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 09:58:27 2012] Initial guess for spatial extent in simple fitting = 13.29"
[Tue Mar 13 09:58:27 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Tue Mar 13 09:58:27 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 13.29"
[Tue Mar 13 09:58:29 2012] fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_src33.ximg exists
[Tue Mar 13 09:58:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_src33.csv
[Tue Mar 13 09:58:29 2012] fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Mar 13 09:58:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_src33.csv
[Tue Mar 13 09:58:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 09:58:29 2012] fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Mar 13 09:58:29 2012] fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Mar 13 09:58:29 2012] Fit fullrun_mos2_xmm0109520501_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Mar 13 09:59:04 2012] Spatial fit model total counts = 59.917900, observed total counts = 64.000000
[Tue Mar 13 09:59:04 2012] Offset between fit and detection position for source 35 = 0.149225 pixels
[Tue Mar 13 09:59:04 2012] 56.469400 total counts/ 37.354000 bgd. counts: snr = 3.127626
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.149225 pixels
  Position = (258.0, 483.2) = 2 23 25.75 -4 35 39.2
  Extent = 6.1 (3.8-8.3)", rotation angle = 0
  Source counts = 19.1 +/- 7.5
  Background counts = 37.4
  Rate = 0.0008 +/- 0.0003
[Tue Mar 13 09:59:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 09:59:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 09:59:04 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 09:59:04 2012] Source does appear to be extended
[Tue Mar 13 09:59:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 09:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 09:59:38 2012] Initial guess for spatial extent in simple fitting = 6.06"
[Tue Mar 13 09:59:38 2012] source mask rpix=1.4, npix_max = 14, mask sum = 14, frac = 0.975
[Tue Mar 13 09:59:38 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 6.06"
[Tue Mar 13 09:59:42 2012] fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_src33.ximg exists
[Tue Mar 13 09:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_src33.csv
[Tue Mar 13 09:59:42 2012] fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Mar 13 09:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_src33.csv
[Tue Mar 13 09:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 09:59:42 2012] fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Mar 13 09:59:43 2012] fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Mar 13 09:59:43 2012] Fit fullrun_mos2_xmm0109520501_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Mar 13 10:00:19 2012] Warning, spatial fit 33 centroid is now closest to src. 12
[Tue Mar 13 10:00:19 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:00:19 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:00:19 2012] Source does appear to be extended
[Tue Mar 13 10:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:01:14 2012] XMMSAS src. selection expression = ellipse(22398.459200, 41994.212800, 363.880810, 363.880810, 0.000000, X, Y)
[Tue Mar 13 10:01:14 2012] Not overwriting source region fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_src.reg
[Tue Mar 13 10:01:14 2012] Extracting stamp from image fullrun_mos2_xmm0109520501_pi300-10000_cl_sm2.00.img.gz, (237, 462) - (279, 504)
[Tue Mar 13 10:01:14 2012] XMMSAS bgd. selection expression = annulus(22398.459200, 41994.212800, 606.468017, 1212.936035, X, Y)
[Tue Mar 13 10:01:14 2012] Writing fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35.gif
[Tue Mar 13 10:01:15 2012] ../../xmm0109520501/products/events/fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0109520501/products/events/fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Tue Mar 13 10:01:15 2012] Mean detx,y = (-8863.82, -14629.57) 
[Tue Mar 13 10:01:15 2012] ../../xmm0109520501/products/images/fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_src.img and ../../xmm0109520501/products/images/fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Tue Mar 13 10:01:15 2012] ../../xmm0109520501/products/spectra/fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0109520501/products/spectra/fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Tue Mar 13 10:01:15 2012] Setting source spectrum file to fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Mar 13 10:01:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Mar 13 10:01:15 2012] ../../xmm0109520501/products/lightcurves/fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0109520501/products/lightcurves/fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Tue Mar 13 10:01:26 2012] Not generating rmf since there are only 19 counts
[Tue Mar 13 10:01:26 2012] rmf not generated due to insufficient counts
[Tue Mar 13 10:01:26 2012] fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35.arf exists, delete to re-create
[Tue Mar 13 10:02:09 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:02:09 2012] Error reading totcts from fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Mar 13 10:02:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:02:11 2012] Using photon index=1.80, rate=0.000789, arf fullrun_mos2_xmm0109520501_pi300-10000_pass1_cl_src35.arf
[Tue Mar 13 10:02:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:02:11 2012] Updating source flux to 3.6e-14
[Tue Mar 13 10:02:17 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting