[Tue Mar 13 09:57:31 2012] Detection parameters:
  Position = (218.0, 421.1) = 2 23 37.38 -4 40 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.4 +/- 8.5
  Background counts = 4.4
  Rate = 0.004 +/- 0.0007

[Tue Mar 13 09:57:33 2012] Off-axis axis estimate = 10.63'
[Tue Mar 13 09:58:26 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 09:58:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 09:58:26 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Tue Mar 13 09:58:26 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879
[Tue Mar 13 09:58:26 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.75"
[Tue Mar 13 09:58:27 2012] fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_src13.ximg exists
[Tue Mar 13 09:58:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_src13.csv
[Tue Mar 13 09:58:27 2012] fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Mar 13 09:58:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_src13.csv
[Tue Mar 13 09:58:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 09:58:27 2012] fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Mar 13 09:58:27 2012] fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Mar 13 09:58:27 2012] Fit fullrun_mos1_xmm0109520501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Mar 13 09:58:54 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.856644 pixels away
[Tue Mar 13 09:58:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 09:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 09:58:54 2012] Assessing source extent using major
[Tue Mar 13 09:58:54 2012] Source does appear to be extended
[Tue Mar 13 09:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 09:59:35 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 09:59:35 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Tue Mar 13 09:59:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879
[Tue Mar 13 09:59:35 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.75"
[Tue Mar 13 09:59:37 2012] fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_src13.ximg exists
[Tue Mar 13 09:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_src13.csv
[Tue Mar 13 09:59:37 2012] fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Mar 13 09:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_src13.csv
[Tue Mar 13 09:59:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 09:59:37 2012] fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Mar 13 09:59:37 2012] fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Mar 13 09:59:37 2012] Fit fullrun_mos1_xmm0109520501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Mar 13 10:00:10 2012] Spatial fit model total counts = 86.363400, observed total counts = 86.000000
[Tue Mar 13 10:00:10 2012] Offset between fit and detection position for source 18 = 0.095472 pixels
[Tue Mar 13 10:00:10 2012] 83.960800 total counts/ 55.753000 bgd. counts: snr = 3.777766
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.095472 pixels
  Position = (218.0, 421.1) = 2 23 37.41 -4 40 9.5
  Extent = 4.8 (3.3-8.1)", rotation angle = 0
  Source counts = 28.2 +/- 9.2
  Background counts = 55.8
  Rate = 0.001 +/- 0.0004
[Tue Mar 13 10:00:10 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:00:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:00:10 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:00:10 2012] Source does appear to be extended
[Tue Mar 13 10:00:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:01:03 2012] XMMSAS src. selection expression = ellipse(18913.547200, 36587.005600, 287.300408, 287.300408, 0.000000, X, Y)
[Tue Mar 13 10:01:03 2012] Not overwriting source region fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_src.reg
[Tue Mar 13 10:01:03 2012] Extracting stamp from image fullrun_mos1_xmm0109520501_pi300-10000_cl_sm2.00.img.gz, (201, 405) - (234, 438)
[Tue Mar 13 10:01:03 2012] XMMSAS bgd. selection expression = annulus(18913.547200, 36587.005600, 478.834014, 957.668028, X, Y)
[Tue Mar 13 10:01:03 2012] Writing fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18.gif
[Tue Mar 13 10:01:04 2012] ../../xmm0109520501/products/events/fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0109520501/products/events/fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Tue Mar 13 10:01:04 2012] Mean detx,y = (-8095.79, 9505.79) 
[Tue Mar 13 10:01:04 2012] ../../xmm0109520501/products/images/fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_src.img and ../../xmm0109520501/products/images/fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Tue Mar 13 10:01:04 2012] ../../xmm0109520501/products/spectra/fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0109520501/products/spectra/fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Tue Mar 13 10:01:04 2012] Setting source spectrum file to fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 13 10:01:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Mar 13 10:01:04 2012] ../../xmm0109520501/products/lightcurves/fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0109520501/products/lightcurves/fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Tue Mar 13 10:01:14 2012] Not generating rmf since there are only 28 counts
[Tue Mar 13 10:01:14 2012] rmf not generated due to insufficient counts
[Tue Mar 13 10:01:14 2012] fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Tue Mar 13 10:02:03 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:02:03 2012] Error reading totcts from fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 13 10:02:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:02:06 2012] Using photon index=1.80, rate=0.00116, arf fullrun_mos1_xmm0109520501_pi300-10000_pass1_cl_src18.arf
[Tue Mar 13 10:02:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:02:06 2012] Updating source flux to 2.8e-14
[Tue Mar 13 10:02:16 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting