[Sun Jun 16 06:27:01 2013] Detection parameters:
  Position = (423.3, 360.2) = 2 25 28.83 -4 46 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.7 +/- 8.8
  Background counts = 13.1
  Rate = 0.004 +/- 0.001

[Sun Jun 16 06:27:02 2013] Off-axis axis estimate = 10.10'
[Sun Jun 16 06:30:34 2013] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:30:34 2013] Initial guess for spatial extent in simple fitting = 11.48"
[Sun Jun 16 06:30:34 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.914
[Sun Jun 16 06:30:34 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 11.48"
[Sun Jun 16 08:16:58 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src32.ximg exists
[Sun Jun 16 08:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src32.csv
[Sun Jun 16 08:16:58 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun Jun 16 08:16:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src32.csv
[Sun Jun 16 08:16:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 08:16:59 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun Jun 16 08:16:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sun Jun 16 08:16:59 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Jun 16 08:16:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sun Jun 16 08:16:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 10:50:23 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.546482 pixels away
[Sun Jun 16 10:50:23 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 10:50:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 10:50:23 2013] Assessing source extent using major
[Sun Jun 16 10:50:23 2013] Source does appear to be extended
[Sun Jun 16 10:50:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 10:50:59 2013] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 10:50:59 2013] Initial guess for spatial extent in simple fitting = 11.48"
[Sun Jun 16 10:50:59 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.914
[Sun Jun 16 10:50:59 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 11.48"
[Sun Jun 16 12:44:30 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src31.ximg exists
[Sun Jun 16 12:44:30 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src31_1.ximg exists
[Sun Jun 16 12:44:30 2013] Fit fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src31 appears to have run properly
[Sun Jun 16 12:44:31 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sun Jun 16 12:44:31 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sun Jun 16 12:44:31 2013] Fit fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sun Jun 16 14:36:29 2013] Spatial fit model total counts = 131.537000, observed total counts = 123.000000
[Sun Jun 16 14:36:29 2013] Offset between fit and detection position for source 34 = 0.448350 pixels
[Sun Jun 16 14:36:29 2013] 127.131800 total counts/ 52.687400 bgd. counts: snr = 10.256015
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.448350 pixels
  Position = (423.7, 360.2) = 2 25 28.71 -4 46 37.5
  Extent = 11.3 (5.3-18.4)", rotation angle = 0
  Source counts = 74.4 +/- 11.3
  Background counts = 52.7
  Rate = 0.004 +/- 0.0006
[Sun Jun 16 14:36:29 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 14:36:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 14:36:29 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 14:36:29 2013] Source does appear to be extended
[Sun Jun 16 14:36:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 14:36:55 2013] XMMSAS src. selection expression = ellipse(36813.964400, 31290.310200, 679.800020, 679.800020, 0.000000, X, Y)
[Sun Jun 16 14:36:55 2013] Writing source region out to fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src34_src.reg
[Sun Jun 16 14:36:55 2013] Extracting stamp from image fullrun_pn_xmm0109520301_pi300-10000_cl_sm2.00.img.gz, (385, 321) - (463, 399)
[Sun Jun 16 14:36:55 2013] XMMSAS bgd. selection expression = annulus(36813.964400, 31290.310200, 1133.000033, 2266.000065, X, Y) && !ellipse(41054.022000, 30576.860000, 2064.344059, 554.243216, 107.929200, X, Y) && !ellipse(39628.127400, 30560.339200, 657.039219, 336.143210, 77.102000, X, Y) && !ellipse(38590.414280, 33144.959800, 799.969623, 799.969623, 0.000000, X, Y) && !ellipse(38906.371400, 28924.365600, 771.652022, 277.596808, 105.445291, X, Y)
[Sun Jun 16 14:36:55 2013] Writing fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src34.gif
[Sun Jun 16 14:55:59 2013] Mean detx,y = (8069.05, -6395.14) 
[Sun Jun 16 14:56:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 14:56:21 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 14:56:22 2013] Setting source spectrum file to fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Jun 16 14:56:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun Jun 16 15:22:31 2013] Not generating rmf since there are only 74 counts
[Sun Jun 16 15:22:31 2013] rmf not generated due to insufficient counts
[Sun Jun 16 15:55:00 2013] Updating aperture counts using extracted products
[Sun Jun 16 15:55:00 2013] Total counts from fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 100.00
[Sun Jun 16 15:55:00 2013] Total counts from fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src34_bgd.pi.gz = 803.00
[Sun Jun 16 15:55:00 2013] Got source and background scale factors 1277362.000000, 11113692.000000
[Sun Jun 16 15:55:00 2013] User source parameters:
  Position = (423.7, 360.2) = 2 25 28.71 -4 46 37.5
  Extent = 11.3 (5.3-18.4)", rotation angle = 0
  Source aperture counts = 7.7 +/- 11.0
  Background aperture counts = 92.3
  Rate = 0.0004 +/- 0.0006

[Sun Jun 16 15:55:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 15:55:04 2013] Using photon index=1.80, rate=0.00414, arf fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src34.arf
[Sun Jun 16 15:55:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 15:55:04 2013] Updating source flux to 1.9e-14
[Sun Jun 16 15:55:18 2013] Source 34 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 15:55:22 2013] xmm0109520301/analysis//spectral/fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete