[Sun Jun 16 06:27:00 2013] Detection parameters:
  Position = (229.1, 357.8) = 2 26 25.34 -4 46 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 10.8
  Background counts = 12.7
  Rate = 0.004 +/- 0.0006

[Sun Jun 16 06:27:02 2013] Off-axis axis estimate = 6.62'
[Sun Jun 16 06:30:34 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:30:34 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Sun Jun 16 06:30:34 2013] source mask rpix=2.2, npix_max = 29, mask sum = 32, frac = 1.067
[Sun Jun 16 06:30:34 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.74"
[Sun Jun 16 08:16:58 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jun 16 08:16:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src15.csv
[Sun Jun 16 08:16:58 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jun 16 08:16:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src15.csv
[Sun Jun 16 08:16:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 08:16:59 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jun 16 08:16:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Jun 16 08:16:59 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jun 16 08:16:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Jun 16 08:16:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 10:50:23 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.615203 pixels away
[Sun Jun 16 10:50:23 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 10:50:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 10:50:23 2013] Assessing source extent using major
[Sun Jun 16 10:50:23 2013] Source does appear to be extended
[Sun Jun 16 10:50:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 10:50:59 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 10:50:59 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Sun Jun 16 10:50:59 2013] source mask rpix=2.2, npix_max = 29, mask sum = 32, frac = 1.067
[Sun Jun 16 10:50:59 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 9.74"
[Sun Jun 16 12:44:30 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 16 12:44:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src14.csv
[Sun Jun 16 12:44:30 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 16 12:44:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src14.csv
[Sun Jun 16 12:44:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:44:31 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 16 12:44:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 16 12:44:31 2013] fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 16 12:44:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 16 12:44:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 14:36:29 2013] Spatial fit model total counts = 19.079800, observed total counts = 150.000000
[Sun Jun 16 14:36:29 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 14:36:29 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 14:36:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 14:36:29 2013] Assessing source extent using major
[Sun Jun 16 14:36:29 2013] Source does appear to be extended
[Sun Jun 16 14:36:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 14:36:55 2013] XMMSAS src. selection expression = ellipse(19881.265015, 31077.072205, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 14:36:55 2013] Writing source region out to fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src17_src.reg
[Sun Jun 16 14:36:55 2013] Extracting stamp from image fullrun_pn_xmm0109520301_pi300-10000_cl_sm2.00.img.gz, (192, 320) - (267, 395)
[Sun Jun 16 14:36:55 2013] XMMSAS bgd. selection expression = annulus(19881.265015, 31077.072205, 1087.500000, 2175.000000, X, Y) && !ellipse(17439.835480, 31266.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.474640, 30312.537933, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 14:36:55 2013] Writing fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src17.gif
[Sun Jun 16 14:46:29 2013] Mean detx,y = (-8287.46, -2023.94) 
[Sun Jun 16 14:46:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 14:47:04 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 14:47:05 2013] Setting source spectrum file to fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jun 16 14:47:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 16 15:19:39 2013] Not generating rmf since there are only 72 counts
[Sun Jun 16 15:19:39 2013] rmf not generated due to insufficient counts
[Sun Jun 16 15:54:57 2013] Updating aperture counts using extracted products
[Sun Jun 16 15:54:57 2013] Total counts from fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 123.00
[Sun Jun 16 15:54:57 2013] Total counts from fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src17_bgd.pi.gz = 584.00
[Sun Jun 16 15:54:57 2013] Got source and background scale factors 1002199.000000, 8666936.000000
[Sun Jun 16 15:54:57 2013] User source parameters:
  Position = (229.1, 357.8) = 2 26 25.34 -4 46 47.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 55.5 +/- 12.1
  Background aperture counts = 67.5
  Rate = 0.003 +/- 0.0007

[Sun Jun 16 15:54:57 2013] Updating counts from extracted products
[Sun Jun 16 15:54:57 2013] Set source signif. to 55.47/8.22 = 6.75
[Sun Jun 16 15:55:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 15:55:04 2013] Using photon index=1.80, rate=0.00308, arf fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src17.arf
[Sun Jun 16 15:55:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 15:55:04 2013] Updating source flux to 1.5e-14
[Sun Jun 16 15:55:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 15:55:22 2013] xmm0109520301/analysis//spectral/fullrun_pn_xmm0109520301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete