[Sun Jun 16 06:28:21 2013] Detection parameters:
  Position = (256.7, 349.8) = 2 26 17.29 -4 47 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.0 +/- 6.6
  Background counts = 5.5
  Rate = 0.001 +/- 0.0004

[Sun Jun 16 06:28:22 2013] Off-axis axis estimate = 4.80'
[Sun Jun 16 09:32:02 2013] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 09:32:02 2013] Initial guess for spatial extent in simple fitting = 8.83"
[Sun Jun 16 09:32:02 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.977
[Sun Jun 16 09:32:02 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 8.83"
[Sun Jun 16 10:50:06 2013] fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun 16 10:50:06 2013] fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun 16 10:50:06 2013] Fit fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_src25 appears to have run properly
[Sun Jun 16 10:50:06 2013] fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun 16 10:50:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jun 16 10:50:06 2013] fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun 16 10:50:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jun 16 10:50:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 10:50:42 2013] Spatial fit model total counts = 65.018400, observed total counts = 60.000000
[Sun Jun 16 10:50:42 2013] Offset between fit and detection position for source 26 = 0.725894 pixels
[Sun Jun 16 10:50:42 2013] 65.648800 total counts/ 26.283200 bgd. counts: snr = 7.678524
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.725894 pixels
  Position = (256.8, 349.1) = 2 26 17.27 -4 47 25.9
  Extent = 16.4 (14.0-17.7)" x 9.7 (4.3-17.0)", rotation angle = 357 (283-57) degrees
  Source counts = 39.4 +/- 8.1
  Background counts = 26.3
  Rate = 0.002 +/- 0.0004
[Sun Jun 16 10:50:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 10:50:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 10:50:42 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 10:50:42 2013] Source does appear to be extended
[Sun Jun 16 10:50:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.82
[Sun Jun 16 13:37:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 13:37:28 2013] Initial guess for spatial extent in simple fitting = 13.08"
[Sun Jun 16 13:37:28 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.996
[Sun Jun 16 13:37:28 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 13.08"
[Sun Jun 16 14:36:15 2013] fullrun_mos2_xmm0109520301_pi300-10000_cl_pass1_src24.ximg exists
[Sun Jun 16 14:36:15 2013] fullrun_mos2_xmm0109520301_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Jun 16 14:36:15 2013] Fit fullrun_mos2_xmm0109520301_pi300-10000_cl_pass1_src24 appears to have run properly
[Sun Jun 16 14:36:15 2013] fullrun_mos2_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Jun 16 14:36:15 2013] fullrun_mos2_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Jun 16 14:36:15 2013] Fit fullrun_mos2_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sun Jun 16 14:36:41 2013] Spatial fit model total counts = 69.779900, observed total counts = 65.000000
[Sun Jun 16 14:36:41 2013] Offset between fit and detection position for source 26 = 0.745504 pixels
[Sun Jun 16 14:36:41 2013] 70.031400 total counts/ 37.816700 bgd. counts: snr = 5.238564
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.745504 pixels
  Position = (256.2, 349.5) = 2 26 17.46 -4 47 24.3
  Extent = 13.4 (3.3-25.1)" x 7.7 (4.6-18.7)", rotation angle = 344
  Source counts = 32.2 +/- 8.4
  Background counts = 37.8
  Rate = 0.001 +/- 0.0004
[Sun Jun 16 14:36:41 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 14:36:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 14:36:41 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 14:36:41 2013] Source does appear to be extended
[Sun Jun 16 14:36:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.18
[Sun Jun 16 15:38:35 2013] XMMSAS src. selection expression = ellipse(22238.230680, 30355.263200, 801.126023, 460.958413, 344.000766, X, Y)
[Sun Jun 16 15:38:35 2013] Writing source region out to fullrun_mos2_xmm0109520301_pi300-10000_pass1_cl_src26_src.reg
[Sun Jun 16 15:38:35 2013] Extracting stamp from image fullrun_mos2_xmm0109520301_pi300-10000_cl_sm2.00.img.gz, (210, 303) - (302, 396)
[Sun Jun 16 15:38:35 2013] XMMSAS bgd. selection expression = annulus(22238.230680, 30355.263200, 1335.210038, 2670.420077, X, Y) && !ellipse(19905.851913, 31038.207886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24157.105700, 32230.767200, 451.169613, 451.169613, 0.000000, X, Y)
[Sun Jun 16 15:38:35 2013] Writing fullrun_mos2_xmm0109520301_pi300-10000_pass1_cl_src26.gif
[Sun Jun 16 15:44:55 2013] Mean detx,y = (5837.04, 1710.00) 
[Sun Jun 16 15:44:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 15:45:13 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 15:45:13 2013] Setting source spectrum file to fullrun_mos2_xmm0109520301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 16 15:45:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109520301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Jun 16 15:53:41 2013] Not generating rmf since there are only 32 counts
[Sun Jun 16 15:53:41 2013] rmf not generated due to insufficient counts
[Sun Jun 16 15:55:12 2013] Updating aperture counts using extracted products
[Sun Jun 16 15:55:12 2013] Total counts from fullrun_mos2_xmm0109520301_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 48.00
[Sun Jun 16 15:55:12 2013] Total counts from fullrun_mos2_xmm0109520301_pi300-10000_pass1_cl_src26_bgd.pi.gz = 394.00
[Sun Jun 16 15:55:12 2013] Got source and background scale factors 1082692.000000, 13980562.000000
[Sun Jun 16 15:55:12 2013] User source parameters:
  Position = (256.2, 349.5) = 2 26 17.46 -4 47 24.3
  Extent = 13.4 (3.3-25.1)" x 7.7 (4.6-18.7)", rotation angle = 344
  Source aperture counts = 17.5 +/- 8.0
  Background aperture counts = 30.5
  Rate = 0.0008 +/- 0.0004

[Sun Jun 16 15:55:14 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 15:55:14 2013] Using photon index=1.80, rate=0.00146, arf fullrun_mos2_xmm0109520301_pi300-10000_pass1_cl_src26.arf
[Sun Jun 16 15:55:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 15:55:14 2013] Updating source flux to 2.3e-14
[Sun Jun 16 15:55:16 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 15:55:18 2013] xmm0109520301/analysis//spectral/fullrun_mos2_xmm0109520301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete