[Sun Jun 16 06:27:34 2013] Detection parameters:
  Position = (272.1, 258.3) = 2 26 12.82 -4 54 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.4 +/- 6.9
  Background counts = 5.8
  Rate = 0.002 +/- 0.0004

[Sun Jun 16 06:27:34 2013] Off-axis axis estimate = 3.48'
[Sun Jun 16 08:17:00 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 08:17:00 2013] Initial guess for spatial extent in simple fitting = 8.17"
[Sun Jun 16 08:17:00 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.752
[Sun Jun 16 08:17:00 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.17"
[Sun Jun 16 09:32:01 2013] fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jun 16 09:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_src21.csv
[Sun Jun 16 09:32:01 2013] fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jun 16 09:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_src21.csv
[Sun Jun 16 09:32:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 09:32:01 2013] fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jun 16 09:32:02 2013] fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jun 16 09:32:02 2013] Fit fullrun_mos1_xmm0109520301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Jun 16 10:50:30 2013] Source 21 is offset by -7.162011 and 6.559480 pixels which is larger than
2 X fitted extent = 1.192713 x 1.192713, not incorporating fit results
[Sun Jun 16 10:50:30 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 10:50:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 10:50:30 2013] Assessing source extent using major
[Sun Jun 16 10:50:30 2013] Source does appear to be extended
[Sun Jun 16 10:50:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 10:50:30 2013] Source is confused with source 20
[Sun Jun 16 12:44:31 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 12:44:31 2013] Initial guess for spatial extent in simple fitting = 8.17"
[Sun Jun 16 12:44:31 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.752
[Sun Jun 16 12:44:31 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 8.17"
[Sun Jun 16 13:37:28 2013] fullrun_mos1_xmm0109520301_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jun 16 13:37:28 2013] fullrun_mos1_xmm0109520301_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jun 16 13:37:28 2013] Fit fullrun_mos1_xmm0109520301_pi300-10000_cl_pass1_src21 appears to have run properly
[Sun Jun 16 13:37:28 2013] fullrun_mos1_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jun 16 13:37:28 2013] fullrun_mos1_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jun 16 13:37:28 2013] Fit fullrun_mos1_xmm0109520301_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Jun 16 14:36:35 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.064422 pixels away
[Sun Jun 16 14:36:35 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 14:36:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 14:36:35 2013] Assessing source extent using major
[Sun Jun 16 14:36:35 2013] Source does appear to be extended
[Sun Jun 16 14:36:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 15:30:01 2013] XMMSAS src. selection expression = ellipse(23624.997040, 22422.584717, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 15:30:01 2013] Writing source region out to fullrun_mos1_xmm0109520301_pi300-10000_pass1_cl_src21_src.reg
[Sun Jun 16 15:30:01 2013] Extracting stamp from image fullrun_mos1_xmm0109520301_pi300-10000_cl_sm2.00.img.gz, (235, 221) - (310, 296)
[Sun Jun 16 15:30:01 2013] XMMSAS bgd. selection expression = annulus(23624.997040, 22422.584717, 1087.500000, 2175.000000, X, Y) && !ellipse(23185.672600, 22522.074400, 1206.720035, 259.020007, 10.905500, X, Y)
[Sun Jun 16 15:30:01 2013] Writing fullrun_mos1_xmm0109520301_pi300-10000_pass1_cl_src21.gif
[Sun Jun 16 15:34:52 2013] Mean detx,y = (-5343.97, -2818.76) 
[Sun Jun 16 15:34:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 15:35:11 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 15:35:11 2013] Setting source spectrum file to fullrun_mos1_xmm0109520301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jun 16 15:35:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109520301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Jun 16 15:38:02 2013] Not generating rmf since there are only 25 counts
[Sun Jun 16 15:38:02 2013] rmf not generated due to insufficient counts
[Sun Jun 16 15:55:08 2013] Updating aperture counts using extracted products
[Sun Jun 16 15:55:08 2013] Total counts from fullrun_mos1_xmm0109520301_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 66.00
[Sun Jun 16 15:55:08 2013] Total counts from fullrun_mos1_xmm0109520301_pi300-10000_pass1_cl_src21_bgd.pi.gz = 302.00
[Sun Jun 16 15:55:08 2013] Got source and background scale factors 1267192.000000, 10378615.000000
[Sun Jun 16 15:55:08 2013] User source parameters:
  Position = (272.1, 258.3) = 2 26 12.82 -4 54 0.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.1 +/- 9.2
  Background aperture counts = 36.9
  Rate = 0.001 +/- 0.0004

[Sun Jun 16 15:55:08 2013] Updating counts from extracted products
[Sun Jun 16 15:55:08 2013] Set source signif. to 29.13/6.07 = 4.80
[Sun Jun 16 15:55:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 15:55:09 2013] Using photon index=1.80, rate=0.00132, arf fullrun_mos1_xmm0109520301_pi300-10000_pass1_cl_src21.arf
[Sun Jun 16 15:55:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 15:55:09 2013] Updating source flux to 1.7e-14
[Sun Jun 16 15:55:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 15:55:16 2013] xmm0109520301/analysis//spectral/fullrun_mos1_xmm0109520301_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete