[Mon Jun 25 10:16:11 2012] Detection parameters:
  Position = (473.2, 391.8) = 2 22 34.43 -4 4 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.5 +/- 10.4
  Background counts = 14.3
  Rate = 0.002 +/- 0.0005

[Mon Jun 25 10:16:13 2012] Off-axis axis estimate = 14.37'
[Mon Jun 25 10:18:44 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 10:18:44 2012] Initial guess for spatial extent in simple fitting = 13.61"
[Mon Jun 25 10:18:44 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.930
[Mon Jun 25 10:18:44 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.61"
[Mon Jun 25 11:36:53 2012] fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jun 25 11:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 25 11:36:53 2012] fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jun 25 11:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 25 11:36:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 11:36:54 2012] fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jun 25 11:36:54 2012] fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jun 25 11:36:54 2012] Fit fullrun_pn_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Jun 25 13:14:06 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 15.822388 pixels away
[Mon Jun 25 13:14:06 2012] Source 21 is offset by 8.439735 and -2.946740 pixels which is larger than
2 X fitted extent = 1.474451 x 1.474451, not incorporating fit results
[Mon Jun 25 13:14:07 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 13:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 13:14:07 2012] Assessing source extent using major
[Mon Jun 25 13:14:07 2012] Source does appear to be extended
[Mon Jun 25 13:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 13:14:28 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 13:14:28 2012] Initial guess for spatial extent in simple fitting = 13.61"
[Mon Jun 25 13:14:28 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.930
[Mon Jun 25 13:14:28 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 13.61"
[Mon Jun 25 14:24:14 2012] fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jun 25 14:24:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_src21.csv
[Mon Jun 25 14:24:14 2012] fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jun 25 14:24:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_src21.csv
[Mon Jun 25 14:24:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 14:24:14 2012] fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jun 25 14:24:14 2012] fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jun 25 14:24:14 2012] Fit fullrun_pn_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Jun 25 15:57:09 2012] Spatial fit model total counts = 237.992000, observed total counts = 238.000000
[Mon Jun 25 15:57:09 2012] Offset between fit and detection position for source 21 = 0.685398 pixels
[Mon Jun 25 15:57:09 2012] 236.003600 total counts/ 203.918000 bgd. counts: snr = 2.246893
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.685398 pixels
  Position = (472.6, 391.9) = 2 22 34.63 -4 4 20.9
  Extent = 6.4 (3.4-10.3)", rotation angle = 0
  Source counts = 32.1 +/- 15.4
  Background counts = 203.9
  Rate = 0.001 +/- 0.0007
[Mon Jun 25 15:57:09 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 15:57:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 15:57:09 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 15:57:09 2012] Source does appear to be extended
[Mon Jun 25 15:57:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 15:57:31 2012] XMMSAS src. selection expression = ellipse(41063.725260, 34049.088200, 381.391211, 381.391211, 0.000000, X, Y)
[Mon Jun 25 15:57:31 2012] Writing source region out to fullrun_pn_xmm0109520101_pi300-10000_pass1_cl_src21_src.reg
[Mon Jun 25 15:57:31 2012] Extracting stamp from image fullrun_pn_xmm0109520101_pi300-10000_cl_sm2.00.img.gz, (451, 370) - (494, 414)
[Mon Jun 25 15:57:31 2012] XMMSAS bgd. selection expression = annulus(41063.725260, 34049.088200, 635.652018, 1271.304037, X, Y) && !ellipse(39435.154877, 33201.406281, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 25 15:57:31 2012] Writing fullrun_pn_xmm0109520101_pi300-10000_pass1_cl_src21.gif
[Mon Jun 25 16:11:49 2012] Mean detx,y = (11206.18, -10574.94) 
[Mon Jun 25 16:11:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 16:12:04 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 16:12:04 2012] Setting source spectrum file to fullrun_pn_xmm0109520101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jun 25 16:12:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109520101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Jun 25 16:47:57 2012] Not generating rmf since there are only 32 counts
[Mon Jun 25 16:47:57 2012] rmf not generated due to insufficient counts
[Mon Jun 25 17:32:36 2012] Updating aperture counts using extracted products
[Mon Jun 25 17:32:36 2012] Error reading totcts from fullrun_pn_xmm0109520101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jun 25 17:32:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 17:32:38 2012] Using photon index=1.80, rate=0.00146, arf fullrun_pn_xmm0109520101_pi300-10000_pass1_cl_src21.arf
[Mon Jun 25 17:32:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 17:32:38 2012] Updating source flux to 1.1e-14
[Mon Jun 25 17:33:10 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Mon Jun 25 17:33:10 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting