[Mon Jun 25 10:16:43 2012] Detection parameters:
  Position = (258.9, 197.2) = 2 23 36.76 -4 18 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.4 +/- 6.9
  Background counts = 5.5
  Rate = 0.002 +/- 0.0005

[Mon Jun 25 10:16:43 2012] Off-axis axis estimate = 7.88'
[Mon Jun 25 11:36:54 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 11:36:54 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Mon Jun 25 11:36:54 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.082
[Mon Jun 25 11:36:54 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.37"
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jun 25 12:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src11.csv
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jun 25 12:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src11.csv
[Mon Jun 25 12:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jun 25 12:22:42 2012] Fit fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Jun 25 13:14:11 2012] Spatial fit model total counts = 78.765700, observed total counts = 78.000000
[Mon Jun 25 13:14:11 2012] Offset between fit and detection position for source 27 = 0.277673 pixels
[Mon Jun 25 13:14:11 2012] 80.687100 total counts/ 63.982200 bgd. counts: snr = 2.088403
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.277673 pixels
  Position = (259.1, 197.0) = 2 23 36.70 -4 18 28.9
  Extent = 3.8 (2.6-5.8)", rotation angle = 0
  Source counts = 16.7 +/- 9.0
  Background counts = 64.0
  Rate = 0.0006 +/- 0.0003
[Mon Jun 25 13:14:11 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 13:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 13:14:11 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 13:14:11 2012] Source does appear to be extended
[Mon Jun 25 13:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 14:24:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 25 14:24:15 2012] Initial guess for spatial extent in simple fitting = 3.78"
[Mon Jun 25 14:24:15 2012] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.533
[Mon Jun 25 14:24:15 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 3.78"
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jun 25 15:10:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src11.csv
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jun 25 15:10:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src11.csv
[Mon Jun 25 15:10:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jun 25 15:10:38 2012] Fit fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Jun 25 15:57:14 2012] Warning, spatial fit 11 centroid is now closest to src. 9
[Mon Jun 25 15:57:14 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 15:57:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 15:57:14 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 15:57:14 2012] Source does appear to be extended
[Mon Jun 25 15:57:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 16:52:18 2012] XMMSAS src. selection expression = ellipse(22489.844820, 17090.704600, 226.989007, 226.989007, 0.000000, X, Y)
[Mon Jun 25 16:52:18 2012] Writing source region out to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src27_src.reg
[Mon Jun 25 16:52:18 2012] Extracting stamp from image fullrun_mos1_xmm0109520101_pi300-10000_cl_sm2.00.img.gz, (246, 184) - (272, 210)
[Mon Jun 25 16:52:18 2012] XMMSAS bgd. selection expression = annulus(22489.844820, 17090.704600, 378.315011, 756.630022, X, Y)
[Mon Jun 25 16:52:18 2012] Writing fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src27.gif
[Mon Jun 25 16:56:58 2012] Mean detx,y = (-10840.77, -2128.18) 
[Mon Jun 25 16:57:00 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 16:57:18 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 16:57:19 2012] Setting source spectrum file to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Jun 25 16:57:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Jun 25 17:11:22 2012] Not generating rmf since there are only 16 counts
[Mon Jun 25 17:11:22 2012] rmf not generated due to insufficient counts
[Mon Jun 25 17:32:40 2012] Updating aperture counts using extracted products
[Mon Jun 25 17:32:40 2012] Error reading totcts from fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Jun 25 17:32:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 17:32:40 2012] Using photon index=1.80, rate=0.000642, arf fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src27.arf
[Mon Jun 25 17:32:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 17:32:40 2012] Updating source flux to 1.6e-14
[Mon Jun 25 17:32:44 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting