[Mon Jun 25 10:16:43 2012] Detection parameters:
  Position = (166.8, 266.2) = 2 24 3.51 -4 13 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.8 +/- 8.4
  Background counts = 6.1
  Rate = 0.001 +/- 0.0003

[Mon Jun 25 10:16:43 2012] Off-axis axis estimate = 9.82'
[Mon Jun 25 11:36:54 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 11:36:54 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Mon Jun 25 11:36:54 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Mon Jun 25 11:36:54 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.34"
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src22.ximg exists
[Mon Jun 25 12:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src22.csv
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon Jun 25 12:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src22.csv
[Mon Jun 25 12:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Jun 25 12:22:42 2012] Fit fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Mon Jun 25 13:14:11 2012] Spatial fit model total counts = 118.988000, observed total counts = 119.000000
[Mon Jun 25 13:14:11 2012] Offset between fit and detection position for source 23 = 1.410215 pixels
[Mon Jun 25 13:14:11 2012] 118.069400 total counts/ 57.036900 bgd. counts: snr = 8.081337
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.410215 pixels
  Position = (165.4, 266.4) = 2 24 3.92 -4 13 27.1
  Extent = 14.7 (5.4-22.7)", rotation angle = 0
  Source counts = 61.0 +/- 10.9
  Background counts = 57.0
  Rate = 0.002 +/- 0.0004
[Mon Jun 25 13:14:11 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 13:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 13:14:11 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 13:14:11 2012] Source does appear to be extended
[Mon Jun 25 13:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 14:24:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 25 14:24:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 25 14:24:15 2012] Initial guess for spatial extent in simple fitting = 14.68"
[Mon Jun 25 14:24:15 2012] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.932
[Mon Jun 25 14:24:15 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 14.68"
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src22.ximg exists
[Mon Jun 25 15:10:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src22.csv
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Jun 25 15:10:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src22.csv
[Mon Jun 25 15:10:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Jun 25 15:10:38 2012] Fit fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Jun 25 15:57:14 2012] Warning, spatial fit 22 centroid is now closest to src. 19
[Mon Jun 25 15:57:14 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 15:57:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 15:57:14 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 15:57:14 2012] Source does appear to be extended
[Mon Jun 25 15:57:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 16:52:19 2012] XMMSAS src. selection expression = ellipse(14345.138600, 23125.618000, 880.890025, 880.890025, 0.000000, X, Y)
[Mon Jun 25 16:52:19 2012] Writing source region out to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src23_src.reg
[Mon Jun 25 16:52:19 2012] Extracting stamp from image fullrun_mos1_xmm0109520101_pi300-10000_cl_sm2.00.img.gz, (115, 216) - (216, 317)
[Mon Jun 25 16:52:19 2012] XMMSAS bgd. selection expression = annulus(14345.138600, 23125.618000, 1468.150042, 2936.300084, X, Y) && !ellipse(16493.930600, 25767.342000, 682.274739, 682.274739, 0.000000, X, Y)
[Mon Jun 25 16:52:19 2012] Writing fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src23.gif
[Mon Jun 25 17:00:17 2012] Mean detx,y = (-7398.32, -11690.40) 
[Mon Jun 25 17:00:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 17:00:30 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 17:00:30 2012] Setting source spectrum file to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jun 25 17:00:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Jun 25 17:12:31 2012] Not generating rmf since there are only 61 counts
[Mon Jun 25 17:12:31 2012] rmf not generated due to insufficient counts
[Mon Jun 25 17:32:40 2012] Updating aperture counts using extracted products
[Mon Jun 25 17:32:40 2012] Error reading totcts from fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jun 25 17:32:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 17:32:41 2012] Using photon index=1.80, rate=0.00235, arf fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src23.arf
[Mon Jun 25 17:32:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 17:32:41 2012] Updating source flux to 5.2e-14
[Mon Jun 25 17:32:44 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting