[Mon Jun 25 10:16:42 2012] Detection parameters:
  Position = (360.0, 337.1) = 2 23 7.35 -4 8 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.4 +/- 9.8
  Background counts = 5.8
  Rate = 0.002 +/- 0.0004

[Mon Jun 25 10:16:43 2012] Off-axis axis estimate = 5.27'
[Mon Jun 25 11:36:54 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 11:36:54 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Mon Jun 25 11:36:54 2012] source mask rpix=2.1, npix_max = 26, mask sum = 29, frac = 1.086
[Mon Jun 25 11:36:54 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.06"
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jun 25 12:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src9.csv
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jun 25 12:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src9.csv
[Mon Jun 25 12:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jun 25 12:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon Jun 25 12:22:42 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jun 25 12:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon Jun 25 12:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 13:14:11 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.453146 pixels away
[Mon Jun 25 13:14:11 2012] Spatial fit model total counts = 138.890000, observed total counts = 134.000000
[Mon Jun 25 13:14:11 2012] Offset between fit and detection position for source 13 = 0.227426 pixels
[Mon Jun 25 13:14:11 2012] Warning, changing simple spatial fit ID from 9 to 19
[Mon Jun 25 13:14:11 2012] 134.379100 total counts/ 100.674000 bgd. counts: snr = 3.359208
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.227426 pixels
  Position = (359.9, 337.3) = 2 23 7.37 -4 8 18.6
  Extent = 6.5 (3.2-16.2)", rotation angle = 0
  Source counts = 33.7 +/- 11.6
  Background counts = 100.7
  Rate = 0.001 +/- 0.0004
[Mon Jun 25 13:14:11 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 13:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 13:14:11 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 13:14:11 2012] Source does appear to be extended
[Mon Jun 25 13:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 13:14:11 2012] Source is confused with source 14
[Mon Jun 25 14:24:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 25 14:24:15 2012] Initial guess for spatial extent in simple fitting = 6.48"
[Mon Jun 25 14:24:15 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.011
[Mon Jun 25 14:24:15 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.48"
[Mon Jun 25 15:10:37 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jun 25 15:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src9.csv
[Mon Jun 25 15:10:37 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jun 25 15:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src9.csv
[Mon Jun 25 15:10:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jun 25 15:10:38 2012] fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jun 25 15:10:38 2012] Fit fullrun_mos1_xmm0109520101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jun 25 15:57:14 2012] Spatial fit model total counts = 123.576000, observed total counts = 124.000000
[Mon Jun 25 15:57:14 2012] Offset between fit and detection position for source 13 = 0.434691 pixels
[Mon Jun 25 15:57:14 2012] 126.853000 total counts/ 84.865400 bgd. counts: snr = 4.557805
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.434691 pixels
  Position = (359.6, 337.6) = 2 23 7.47 -4 8 17.4
  Extent = 7.0 (5.1-10.3)", rotation angle = 0
  Source counts = 42.0 +/- 11.3
  Background counts = 84.9
  Rate = 0.002 +/- 0.0004
[Mon Jun 25 15:57:14 2012] Spatial fit model total counts = 139.005000, observed total counts = 134.000000
[Mon Jun 25 15:57:14 2012] Offset between fit and detection position for source 13 = 0.410792 pixels
[Mon Jun 25 15:57:14 2012] Warning, changing simple spatial fit ID from 9 to 19
[Mon Jun 25 15:57:14 2012] 133.040800 total counts/ 97.224700 bgd. counts: snr = 3.632369
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.410792 pixels
  Position = (359.9, 337.3) = 2 23 7.38 -4 8 18.5
  Extent = 6.7 (3.2-18.3)", rotation angle = 0
  Source counts = 35.8 +/- 11.5
  Background counts = 97.2
  Rate = 0.001 +/- 0.0004
[Mon Jun 25 15:57:14 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 15:57:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 15:57:14 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 15:57:14 2012] Source does appear to be extended
[Mon Jun 25 15:57:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 16:52:18 2012] XMMSAS src. selection expression = ellipse(31263.256000, 29300.072000, 401.147412, 401.147412, 0.000000, X, Y)
[Mon Jun 25 16:52:18 2012] Writing source region out to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src13_src.reg
[Mon Jun 25 16:52:18 2012] Extracting stamp from image fullrun_mos1_xmm0109520101_pi300-10000_cl_sm2.00.img.gz, (337, 314) - (383, 360)
[Mon Jun 25 16:52:18 2012] XMMSAS bgd. selection expression = annulus(31263.256000, 29300.072000, 668.579019, 1337.158038, X, Y) && !ellipse(31736.488556, 28987.877441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30839.593640, 28259.715000, 690.975220, 154.821604, 317.407500, X, Y)
[Mon Jun 25 16:52:18 2012] Writing fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src13.gif
[Mon Jun 25 16:56:13 2012] Mean detx,y = (3365.26, 2828.49) 
[Mon Jun 25 16:56:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 16:56:30 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 16:56:30 2012] Setting source spectrum file to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Jun 25 16:56:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Jun 25 17:11:09 2012] Not generating rmf since there are only 35 counts
[Mon Jun 25 17:11:09 2012] rmf not generated due to insufficient counts
[Mon Jun 25 17:32:40 2012] Updating aperture counts using extracted products
[Mon Jun 25 17:32:40 2012] Error reading totcts from fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Jun 25 17:32:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 25 17:32:40 2012] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0109520101_pi300-10000_pass1_cl_src13.arf
[Mon Jun 25 17:32:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 25 17:32:40 2012] Updating source flux to 1.6e-14
[Mon Jun 25 17:32:44 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Mon Jun 25 17:32:44 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting