[Thu May 23 20:39:34 2013] Detection parameters:
  Position = (266.6, 268.2) = 7 51 23.89 14 43 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.2 +/- 34.8
  Background counts = 478.8
  Rate = 0.008 +/- 0.001

[Thu May 23 20:39:34 2013] Off-axis axis estimate = 3.18'
[Thu May 23 20:49:08 2013] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Thu May 23 20:49:08 2013] Initial guess for spatial extent in simple fitting = 8.02"
[Thu May 23 20:49:08 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.138
[Thu May 23 20:49:08 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.02"
[Thu May 23 21:06:25 2013] fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 23 21:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_src2.csv
[Thu May 23 21:06:25 2013] fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 23 21:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_src2.csv
[Thu May 23 21:06:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 21:06:25 2013] fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 23 21:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 23 21:06:25 2013] fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 23 21:06:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 23 21:06:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109510301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 21:29:55 2013] Warning, spatial fit 2 centroid is now closest to src. 8
[Thu May 23 21:29:55 2013] Vigneting correction estimate = 1.000000
[Thu May 23 21:29:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 21:29:55 2013] Assessing source extent using major
[Thu May 23 21:29:55 2013] Source does appear to be extended
[Thu May 23 21:29:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 21:30:03 2013] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Thu May 23 21:30:03 2013] Initial guess for spatial extent in simple fitting = 8.02"
[Thu May 23 21:30:03 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.138
[Thu May 23 21:30:03 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.02"
[Thu May 23 21:37:09 2013] fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 23 21:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_src2.csv
[Thu May 23 21:37:09 2013] fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 23 21:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_src2.csv
[Thu May 23 21:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 21:37:09 2013] fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 23 21:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 23 21:37:09 2013] fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 23 21:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 23 21:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109510301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 21:52:05 2013] Spatial fit model total counts = 6459.390000, observed total counts = 5144.000000
[Thu May 23 21:52:05 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 23 21:52:05 2013] Vigneting correction estimate = 1.000000
[Thu May 23 21:52:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 21:52:05 2013] Assessing source extent using major
[Thu May 23 21:52:05 2013] Source does appear to be extended
[Thu May 23 21:52:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 21:52:11 2013] XMMSAS src. selection expression = ellipse(23148.554688, 23283.727539, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 21:52:11 2013] Writing source region out to fullrun_pn_xmm0109510301_pi300-10000_pass1_cl_src2_src.reg
[Thu May 23 21:52:11 2013] Extracting stamp from image fullrun_pn_xmm0109510301_pi300-10000_cl_sm2.00.img.gz, (229, 231) - (304, 306)
[Thu May 23 21:52:11 2013] XMMSAS bgd. selection expression = annulus(23148.554688, 23283.727539, 1087.500000, 2175.000000, X, Y) && !ellipse(25030.210400, 23985.667200, 1453.622442, 1435.982441, 4.708267, X, Y) && !ellipse(24522.870400, 26875.392400, 1656.664048, 430.892012, 81.029848, X, Y) && !ellipse(23661.115200, 25521.353200, 1566.472045, 375.160811, 43.500100, X, Y)
[Thu May 23 21:52:11 2013] Writing fullrun_pn_xmm0109510301_pi300-10000_pass1_cl_src2.gif
[Thu May 23 22:01:12 2013] Mean detx,y = (2086.08, -556.01) 
[Thu May 23 22:01:23 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 22:01:42 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 22:01:42 2013] Setting source spectrum file to fullrun_pn_xmm0109510301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 23 22:01:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109510301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 23 22:15:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 23 22:15:18 2013] rmf not generated due to insufficient counts
[Thu May 23 22:50:05 2013] Updating aperture counts using extracted products
[Thu May 23 22:50:05 2013] Total counts from fullrun_pn_xmm0109510301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 3702.00
[Thu May 23 22:50:05 2013] Total counts from fullrun_pn_xmm0109510301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 4314.00
[Thu May 23 22:50:05 2013] Got source and background scale factors 1060652.000000, 1397354.000000
[Thu May 23 22:50:05 2013] User source parameters:
  Position = (266.6, 268.2) = 7 51 23.89 14 43 50.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 427.5 +/- 61.9
  Background aperture counts = 3274.5
  Rate = 0.01 +/- 0.002

[Thu May 23 22:50:05 2013] Updating counts from extracted products
[Thu May 23 22:50:05 2013] Set source signif. to 427.49/57.22 = 7.47
[Thu May 23 22:50:06 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 22:50:06 2013] Using photon index=1.80, rate=0.0121, arf fullrun_pn_xmm0109510301_pi300-10000_pass1_cl_src2.arf
[Thu May 23 22:50:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 22:50:06 2013] Updating source flux to 3.3e-14
[Thu May 23 22:50:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 22:50:17 2013] xmm0109510301/analysis//spectral/fullrun_pn_xmm0109510301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete