[Sun Jun 9 00:18:29 2013] Detection parameters: Position = (345.9, 441.1) = 16 53 55.52 -41 40 40.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 63.0 +/- 12.4 Background counts = 36.0 Rate = 0.002 +/- 0.0004 [Sun Jun 9 00:18:32 2013] Off-axis axis estimate = 10.90' [Sun Jun 9 00:19:44 2013] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:19:44 2013] Initial guess for spatial extent in simple fitting = 11.88" [Sun Jun 9 00:19:44 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.862 [Sun Jun 9 00:19:44 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 11.88" [Sun Jun 9 00:19:46 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src53.ximg exists [Sun Jun 9 00:19:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src53.csv [Sun Jun 9 00:19:46 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src53_1.ximg exists [Sun Jun 9 00:19:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src53.csv [Sun Jun 9 00:19:46 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:19:48 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src53.ximg exists [Sun Jun 9 00:19:48 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists [Sun Jun 9 00:19:48 2013] Fit fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly [Sun Jun 9 00:20:20 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 11.357009 pixels away [Sun Jun 9 00:20:20 2013] Source 67 is offset by -3.513284 and 7.194912 pixels which is larger than 2 X fitted extent = 1.327416 x 1.327416, not incorporating fit results [Sun Jun 9 00:20:20 2013] Source 67 is offset by -2.664985 and 9.606544 pixels which is larger than 2 X fitted extent = 1.305747 x 1.305747, not incorporating fit results [Sun Jun 9 00:20:21 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:20:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:20:21 2013] Assessing source extent using major [Sun Jun 9 00:20:21 2013] Source does appear to be extended [Sun Jun 9 00:20:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:21:30 2013] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:21:30 2013] Initial guess for spatial extent in simple fitting = 11.88" [Sun Jun 9 00:21:30 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.862 [Sun Jun 9 00:21:30 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 11.88" [Sun Jun 9 00:21:31 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src51.ximg exists [Sun Jun 9 00:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src51.csv [Sun Jun 9 00:21:31 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src51_1.ximg exists [Sun Jun 9 00:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src51.csv [Sun Jun 9 00:21:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:21:33 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src51.ximg exists [Sun Jun 9 00:21:33 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists [Sun Jun 9 00:21:33 2013] Fit fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly [Sun Jun 9 00:22:04 2013] Spatial fit model total counts = 441.042000, observed total counts = 400.000000 [Sun Jun 9 00:22:04 2013] Poor agreement between spatial fit and data for source 67 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 00:22:04 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 10.523631 pixels away [Sun Jun 9 00:22:04 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:22:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:22:04 2013] Assessing source extent using major [Sun Jun 9 00:22:04 2013] Source does appear to be extended [Sun Jun 9 00:22:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:23:13 2013] XMMSAS src. selection expression = ellipse(30043.846313, 38323.069305, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 00:23:13 2013] Not overwriting source region fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_src.reg [Sun Jun 9 00:23:13 2013] Extracting stamp from image fullrun_pn_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (308, 404) - (383, 479) [Sun Jun 9 00:23:13 2013] XMMSAS bgd. selection expression = annulus(30043.846313, 38323.069305, 1087.500000, 2175.000000, X, Y) && !ellipse(27910.554169, 35986.247925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29688.316650, 40701.314453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31548.180603, 40270.119110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27110.330994, 39464.763763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31302.162000, 36767.830200, 1233.560035, 1233.560035, 0.000000, X, Y) && !ellipse(29545.364563, 36451.332062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31251.688171, 36479.682465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27266.934000, 34491.760000, 2840.912082, 2840.912082, 0.000000, X, Y) [Sun Jun 9 00:23:13 2013] Writing fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67.gif [Sun Jun 9 00:23:28 2013] ../../xmm0109490601/products/events/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_src.evt and ../../xmm0109490601/products/events/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_bgd.evt exist, delete to re-create [Sun Jun 9 00:23:28 2013] Mean detx,y = (4780.13, -10214.00) [Sun Jun 9 00:23:28 2013] ../../xmm0109490601/products/images/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_src.img and ../../xmm0109490601/products/images/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_bgd.img exist, delete to re-create [Sun Jun 9 00:23:28 2013] ../../xmm0109490601/products/spectra/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_src_b10.pi.gz and ../../xmm0109490601/products/spectra/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_bgd.pi exist, delete to re-create [Sun Jun 9 00:23:28 2013] Setting source spectrum file to fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_src_b10.pi.gz [Sun Jun 9 00:23:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_bgd.pi.gz [Sun Jun 9 00:23:28 2013] ../../xmm0109490601/products/lightcurves/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_src.lc and ../../xmm0109490601/products/lightcurves/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_bgd.lc exist, delete to re-create [Sun Jun 9 00:23:58 2013] Not generating rmf since there are only 62 counts [Sun Jun 9 00:23:58 2013] rmf not generated due to insufficient counts [Sun Jun 9 00:23:58 2013] fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67.arf exists, delete to re-create [Sun Jun 9 05:20:52 2013] Updating aperture counts using extracted products [Sun Jun 9 05:20:52 2013] Total counts from fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_src_b10.pi.gz = 267.00 [Sun Jun 9 05:20:52 2013] Total counts from fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_bgd.pi.gz = 891.00 [Sun Jun 9 05:20:53 2013] Got source and background scale factors 1337600.000000, 5425661.000000 [Sun Jun 9 05:20:53 2013] User source parameters: Position = (345.9, 441.1) = 16 53 55.52 -41 40 40.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 47.3 +/- 17.4 Background aperture counts = 219.7 Rate = 0.002 +/- 0.0006 [Sun Jun 9 05:20:53 2013] Updating counts from extracted products [Sun Jun 9 05:20:53 2013] Set source signif. to 47.34/14.82 = 3.19 [Sun Jun 9 05:21:37 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 05:21:37 2013] Using photon index=1.80, rate=0.00156, arf fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67.arf [Sun Jun 9 05:21:37 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 05:21:37 2013] Updating source flux to 2e-14 [Sun Jun 9 05:23:25 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 05:23:45 2013] xmm0109490601/analysis//spectral/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete