[Sun Jun  9 00:18:27 2013] Detection parameters:
  Position = (321.4, 414.2) = 16 54 5.04 -41 42 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.4 +/- 19.1
  Background counts = 42.0
  Rate = 0.01 +/- 0.001

[Sun Jun  9 00:18:32 2013] Off-axis axis estimate = 8.56'
[Sun Jun  9 00:19:44 2013] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:19:44 2013] Initial guess for spatial extent in simple fitting = 10.71"
[Sun Jun  9 00:19:44 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026
[Sun Jun  9 00:19:44 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 10.71"
[Sun Jun  9 00:19:46 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun  9 00:19:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src25.csv
[Sun Jun  9 00:19:46 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun  9 00:19:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src25.csv
[Sun Jun  9 00:19:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:19:47 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun  9 00:19:47 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun  9 00:19:47 2013] Fit fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Jun  9 00:20:20 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 14.757498 pixels away
[Sun Jun  9 00:20:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:20:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:20:21 2013] Assessing source extent using major
[Sun Jun  9 00:20:21 2013] Source does appear to be extended
[Sun Jun  9 00:20:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:21:30 2013] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:21:30 2013] Initial guess for spatial extent in simple fitting = 10.71"
[Sun Jun  9 00:21:30 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026
[Sun Jun  9 00:21:30 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 10.71"
[Sun Jun  9 00:21:31 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src24.ximg exists
[Sun Jun  9 00:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src24.csv
[Sun Jun  9 00:21:31 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Jun  9 00:21:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src24.csv
[Sun Jun  9 00:21:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:21:33 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Jun  9 00:21:33 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Jun  9 00:21:33 2013] Fit fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sun Jun  9 00:22:04 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 14.757498 pixels away
[Sun Jun  9 00:22:04 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:22:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:22:04 2013] Assessing source extent using major
[Sun Jun  9 00:22:04 2013] Source does appear to be extended
[Sun Jun  9 00:22:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:22:05 2013] Source is confused with source 85
[Sun Jun  9 00:23:11 2013] XMMSAS src. selection expression = ellipse(27910.554169, 35986.247925, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 00:23:11 2013] Not overwriting source region fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_src.reg
[Sun Jun  9 00:23:11 2013] Extracting stamp from image fullrun_pn_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (284, 377) - (359, 452)
[Sun Jun  9 00:23:11 2013] XMMSAS bgd. selection expression = annulus(27910.554169, 35986.247925, 1087.500000, 2175.000000, X, Y) && !ellipse(28566.850861, 34744.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27760.945200, 33290.352000, 1358.600039, 1358.600039, 0.000000, X, Y) && !ellipse(30043.846313, 38323.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25150.680000, 37987.922600, 1840.392053, 1840.392053, 0.000000, X, Y) && !ellipse(31302.162000, 36767.830200, 1233.560035, 1233.560035, 0.000000, X, Y) && !ellipse(25006.698000, 36904.474000, 1740.896050, 1740.896050, 0.000000, X, Y) && !ellipse(29545.364563, 36451.332062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29141.850555, 34844.975616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27266.934000, 34491.760000, 2840.912082, 2840.912082, 0.000000, X, Y)
[Sun Jun  9 00:23:11 2013] Writing fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31.gif
[Sun Jun  9 00:23:23 2013] ../../xmm0109490601/products/events/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0109490601/products/events/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Sun Jun  9 00:23:23 2013] Mean detx,y = (2318.93, -8216.63) 
[Sun Jun  9 00:23:23 2013] ../../xmm0109490601/products/images/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_src.img and ../../xmm0109490601/products/images/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Sun Jun  9 00:23:23 2013] ../../xmm0109490601/products/spectra/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0109490601/products/spectra/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Sun Jun  9 00:23:23 2013] Setting source spectrum file to fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Jun  9 00:23:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Jun  9 00:23:23 2013] ../../xmm0109490601/products/lightcurves/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0109490601/products/lightcurves/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sun Jun  9 00:23:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 00:23:58 2013] rmf not generated due to insufficient counts
[Sun Jun  9 00:23:58 2013] fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Sun Jun  9 05:20:39 2013] Updating aperture counts using extracted products
[Sun Jun  9 05:20:39 2013] Total counts from fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 470.00
[Sun Jun  9 05:20:39 2013] Total counts from fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_bgd.pi.gz = 365.00
[Sun Jun  9 05:20:39 2013] Got source and background scale factors 1337600.000000, 1785473.000000
[Sun Jun  9 05:20:39 2013] User source parameters:
  Position = (321.4, 414.2) = 16 54 5.04 -41 42 37.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 196.6 +/- 22.7
  Background aperture counts = 273.4
  Rate = 0.006 +/- 0.0008

[Sun Jun  9 05:20:39 2013] Updating counts from extracted products
[Sun Jun  9 05:20:39 2013] Set source signif. to 196.56/16.54 = 11.89
[Sun Jun  9 05:21:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 05:21:34 2013] Using photon index=1.80, rate=0.0065, arf fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31.arf
[Sun Jun  9 05:21:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 05:21:35 2013] Updating source flux to 6.7e-14
[Sun Jun  9 05:23:25 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 05:23:45 2013] xmm0109490601/analysis//spectral/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete