[Sun Jun 9 00:18:30 2013] Detection parameters: Position = (342.2, 170.3) = 16 53 56.86 -42 0 19.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 60.9 +/- 12.2 Background counts = 30.4 Rate = 0.002 +/- 0.0004 [Sun Jun 9 00:18:32 2013] Off-axis axis estimate = 9.82' [Sun Jun 9 00:19:44 2013] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:19:44 2013] Initial guess for spatial extent in simple fitting = 11.34" [Sun Jun 9 00:19:44 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933 [Sun Jun 9 00:19:44 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 11.34" [Sun Jun 9 00:19:47 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src95.ximg exists [Sun Jun 9 00:19:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src95.csv [Sun Jun 9 00:19:47 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src95_1.ximg exists [Sun Jun 9 00:19:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src95.csv [Sun Jun 9 00:19:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src95_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:19:49 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src95.ximg exists [Sun Jun 9 00:19:49 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists [Sun Jun 9 00:19:49 2013] Fit fullrun_pn_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly [Sun Jun 9 00:20:21 2013] Warning: source 95 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 110 at 15.072772 pixels away [Sun Jun 9 00:20:21 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:20:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:20:21 2013] Assessing source extent using major [Sun Jun 9 00:20:21 2013] Source does appear to be extended [Sun Jun 9 00:20:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:21:30 2013] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:21:30 2013] Initial guess for spatial extent in simple fitting = 11.34" [Sun Jun 9 00:21:30 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933 [Sun Jun 9 00:21:30 2013] Giving source the simple spatial ID 89 for pass 1, mean size = 11.34" [Sun Jun 9 00:21:32 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src89.ximg exists [Sun Jun 9 00:21:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src89.csv [Sun Jun 9 00:21:32 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src89_1.ximg exists [Sun Jun 9 00:21:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src89.csv [Sun Jun 9 00:21:32 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src89_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:21:34 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src89.ximg exists [Sun Jun 9 00:21:34 2013] fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists [Sun Jun 9 00:21:34 2013] Fit fullrun_pn_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src89 appears to have run properly [Sun Jun 9 00:22:04 2013] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 110 at 15.072772 pixels away [Sun Jun 9 00:22:04 2013] Source 110 is offset by -4.764329 and -6.300271 pixels which is larger than 2 X fitted extent = 1.262110 x 1.262110, not incorporating fit results [Sun Jun 9 00:22:04 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:22:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:22:04 2013] Assessing source extent using major [Sun Jun 9 00:22:04 2013] Source does appear to be extended [Sun Jun 9 00:22:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:23:14 2013] XMMSAS src. selection expression = ellipse(29725.115356, 14769.854385, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 00:23:14 2013] Not overwriting source region fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_src.reg [Sun Jun 9 00:23:14 2013] Extracting stamp from image fullrun_pn_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (305, 133) - (380, 208) [Sun Jun 9 00:23:14 2013] XMMSAS bgd. selection expression = annulus(29725.115356, 14769.854385, 1087.500000, 2175.000000, X, Y) && !ellipse(29235.785492, 15552.389755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27881.871887, 17435.400253, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 00:23:14 2013] Writing fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110.gif [Sun Jun 9 00:23:33 2013] ../../xmm0109490601/products/events/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_src.evt and ../../xmm0109490601/products/events/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_bgd.evt exist, delete to re-create [Sun Jun 9 00:23:33 2013] Mean detx,y = (1132.70, 13045.30) [Sun Jun 9 00:23:33 2013] ../../xmm0109490601/products/images/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_src.img and ../../xmm0109490601/products/images/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_bgd.img exist, delete to re-create [Sun Jun 9 00:23:33 2013] ../../xmm0109490601/products/spectra/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_src_b10.pi.gz and ../../xmm0109490601/products/spectra/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_bgd.pi exist, delete to re-create [Sun Jun 9 00:23:33 2013] Setting source spectrum file to fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_src_b10.pi.gz [Sun Jun 9 00:23:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_bgd.pi.gz [Sun Jun 9 00:23:33 2013] ../../xmm0109490601/products/lightcurves/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_src.lc and ../../xmm0109490601/products/lightcurves/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_bgd.lc exist, delete to re-create [Sun Jun 9 00:23:58 2013] Not generating rmf since there are only 60 counts [Sun Jun 9 00:23:58 2013] rmf not generated due to insufficient counts [Sun Jun 9 00:23:58 2013] fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110.arf exists, delete to re-create [Sun Jun 9 05:21:06 2013] Updating aperture counts using extracted products [Sun Jun 9 05:21:06 2013] Total counts from fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_src_b10.pi.gz = 257.00 [Sun Jun 9 05:21:06 2013] Total counts from fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_bgd.pi.gz = 1235.00 [Sun Jun 9 05:21:06 2013] Got source and background scale factors 1334400.000000, 6471088.000000 [Sun Jun 9 05:21:06 2013] User source parameters: Position = (342.2, 170.3) = 16 53 56.86 -42 0 19.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 2.3 +/- 17.1 Background aperture counts = 254.7 Rate = 8e-05 +/- 0.0006 [Sun Jun 9 05:21:06 2013] Updating counts from extracted products [Sun Jun 9 05:21:06 2013] Set source signif. to 2.33/15.96 = 0.15 [Sun Jun 9 05:21:39 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 05:21:39 2013] Using photon index=1.80, rate=7.7e-05, arf fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110.arf [Sun Jun 9 05:21:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 05:21:39 2013] Updating source flux to 1.2e-15 [Sun Jun 9 05:23:25 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 05:23:45 2013] xmm0109490601/analysis//spectral/fullrun_pn_xmm0109490601_pi300-10000_pass1_cl_src110_pl.csv not found, spectral fit skipped or did not complete