[Sun Jun 9 00:18:39 2013] Detection parameters: Position = (302.0, 293.1) = 16 54 12.58 -41 51 26.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 59.4 +/- 13.3 Background counts = 36.6 Rate = 0.002 +/- 0.0004 [Sun Jun 9 00:18:40 2013] Off-axis axis estimate = 0.46' [Sun Jun 9 00:19:53 2013] Using EEF radius (= 6.66 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:19:53 2013] Initial guess for spatial extent in simple fitting = 6.66" [Sun Jun 9 00:19:53 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.970 [Sun Jun 9 00:19:53 2013] Giving source the simple spatial ID 87 for pass 0, mean size = 6.66" [Sun Jun 9 00:19:56 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src87.ximg exists [Sun Jun 9 00:19:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src87.csv [Sun Jun 9 00:19:56 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src87_1.ximg exists [Sun Jun 9 00:19:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src87.csv [Sun Jun 9 00:19:56 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src87_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:19:58 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src87.ximg exists [Sun Jun 9 00:19:58 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists [Sun Jun 9 00:19:58 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly [Sun Jun 9 00:20:57 2013] Warning, spatial fit 87 centroid is now closest to src. 3 [Sun Jun 9 00:20:57 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:20:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:20:57 2013] Assessing source extent using major [Sun Jun 9 00:20:57 2013] Source does appear to be extended [Sun Jun 9 00:20:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:20:57 2013] Source is confused with source 3 [Sun Jun 9 00:21:37 2013] Using EEF radius (= 6.66 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:21:37 2013] Initial guess for spatial extent in simple fitting = 6.66" [Sun Jun 9 00:21:37 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.970 [Sun Jun 9 00:21:37 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 6.66" [Sun Jun 9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src79.ximg exists [Sun Jun 9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src79_1.ximg exists [Sun Jun 9 00:21:40 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src79 appears to have run properly [Sun Jun 9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src79.ximg exists [Sun Jun 9 00:21:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src79.csv [Sun Jun 9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists [Sun Jun 9 00:21:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src79.csv [Sun Jun 9 00:21:41 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src79_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:22:37 2013] Spatial fit model total counts = 1290.430000, observed total counts = 1347.000000 [Sun Jun 9 00:22:37 2013] Offset between fit and detection position for source 84 = 6.685366 pixels [Sun Jun 9 00:22:37 2013] 1461.433000 total counts/ 1272.550000 bgd. counts: snr = 5.294872 Spatial fit parameters: Offset between fit and detection position for source 84 = 6.685366 pixels Position = (296.8, 288.8) = 16 54 14.58 -41 51 43.7 Extent = 11.3" x 11.3", rotation angle = 0 Source counts = 188.9 +/- 38.2 Background counts = 1272.5 Rate = 0.006 +/- 0.001 [Sun Jun 9 00:22:37 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:22:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:22:37 2013] Assessing source extent using major [Sun Jun 9 00:22:37 2013] Source does appear to be extended [Sun Jun 9 00:22:37 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 02:32:15 2013] XMMSAS src. selection expression = ellipse(25774.706000, 25078.568000, 676.398019, 676.398019, 0.000000, X, Y) [Sun Jun 9 02:32:15 2013] Writing source region out to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src84_src.reg [Sun Jun 9 02:32:15 2013] Extracting stamp from image fullrun_mos2_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (258, 250) - (336, 328) [Sun Jun 9 02:32:15 2013] XMMSAS bgd. selection expression = annulus(25774.706000, 25078.568000, 1127.330032, 2254.660065, X, Y) && !ellipse(26377.746000, 27615.976000, 861.488025, 861.488025, 0.000000, X, Y) && !ellipse(26420.331200, 25995.398800, 345.348010, 345.348010, 0.000000, X, Y) && !ellipse(24600.430000, 26883.056000, 299.536009, 299.536009, 0.000000, X, Y) && !ellipse(23194.698000, 27228.624000, 346.920010, 346.920010, 0.000000, X, Y) && !ellipse(25964.700000, 26864.320000, 1068.968031, 1068.968031, 0.000000, X, Y) && !ellipse(26064.267600, 26502.335800, 231.114407, 231.114407, 0.000000, X, Y) && !ellipse(27503.116028, 25858.752838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23738.490000, 26790.712000, 701.296820, 330.604810, 358.654936, X, Y) && !ellipse(23682.842163, 24239.139832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27089.794600, 24927.062800, 261.991208, 261.991208, 0.000000, X, Y) && !ellipse(25935.025600, 23513.203000, 630.411218, 630.411218, 0.000000, X, Y) && !ellipse(26903.120560, 24001.951800, 320.000009, 320.000009, 0.000000, X, Y) && !ellipse(24961.589800, 22169.680600, 868.560025, 397.840811, 30.393800, X, Y) && !ellipse(25086.890400, 25599.913400, 1076.544031, 522.493615, 155.673000, X, Y) && !ellipse(25790.608856, 28100.731262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.221744, 22632.814791, 587.387350, 529.321953, 319.537065, X, Y) && !ellipse(24198.238600, 25560.236000, 1146.856033, 1146.856033, 0.000000, X, Y) && !ellipse(24259.299469, 26242.269165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.827200, 24471.084860, 311.607209, 311.607209, 0.000000, X, Y) && !ellipse(27287.559509, 23601.542511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28858.102000, 24121.572000, 1259.976036, 1259.976036, 0.000000, X, Y) && !ellipse(24522.678375, 23653.551880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27123.502594, 26765.811737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28617.110565, 25705.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26452.037720, 24071.612793, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 02:32:15 2013] Writing fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src84.gif [Sun Jun 9 03:01:06 2013] Mean detx,y = (1423.51, -2407.42) [Sun Jun 9 03:01:08 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 03:01:20 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 03:01:21 2013] Setting source spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src84_src_b10.pi.gz [Sun Jun 9 03:01:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src84_bgd.pi.gz [Sun Jun 9 05:22:35 2013] Updating aperture counts using extracted products [Sun Jun 9 05:22:35 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src84_src_b10.pi.gz = 401.00 [Sun Jun 9 05:22:35 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src84_bgd.pi.gz = 99.00 [Sun Jun 9 05:22:35 2013] Got source and background scale factors 1433560.000000, 548748.000000 [Sun Jun 9 05:22:35 2013] User source parameters: Position = (296.8, 288.8) = 16 54 14.58 -41 51 43.7 Extent = 11.3" x 11.3", rotation angle = 0 Source aperture counts = 142.4 +/- 21.0 Background aperture counts = 258.6 Rate = 0.004 +/- 0.0006 [Sun Jun 9 05:22:42 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 05:22:42 2013] Using photon index=1.80, rate=0.00575, arf fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src84.arf [Sun Jun 9 05:22:42 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 05:22:42 2013] Updating source flux to 1.1e-13 [Sun Jun 9 05:23:06 2013] Flag c found in src. 84 procflags, skipping spectral fitting [Sun Jun 9 05:23:25 2013] xmm0109490601/analysis//spectral/fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src84_pl.csv not found, spectral fit skipped or did not complete