[Sun Jun  9 00:18:36 2013] Detection parameters:
  Position = (400.0, 188.8) = 16 53 34.32 -41 58 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 306.2 +/- 21.8
  Background counts = 8.9
  Rate = 0.009 +/- 0.0007

[Sun Jun  9 00:18:40 2013] Off-axis axis estimate = 10.83'
[Sun Jun  9 00:19:53 2013] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:19:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 00:19:53 2013] Initial guess for spatial extent in simple fitting = 11.85"
[Sun Jun  9 00:19:53 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.866
[Sun Jun  9 00:19:53 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 11.85"
[Sun Jun  9 00:19:54 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jun  9 00:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src15.csv
[Sun Jun  9 00:19:54 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jun  9 00:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src15.csv
[Sun Jun  9 00:19:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:19:56 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jun  9 00:19:56 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jun  9 00:19:56 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Jun  9 00:20:57 2013] Spatial fit model total counts = 408.000000, observed total counts = 408.000000
[Sun Jun  9 00:20:57 2013] Offset between fit and detection position for source 8 = 0.376883 pixels
[Sun Jun  9 00:20:57 2013] 408.028000 total counts/ 169.927000 bgd. counts: snr = 18.265435
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.376883 pixels
  Position = (399.8, 188.5) = 16 53 34.39 -41 58 59.8
  Extent = 7.2 (6.4-8.3)", rotation angle = 0
  Source counts = 238.1 +/- 20.2
  Background counts = 169.9
  Rate = 0.007 +/- 0.0006
[Sun Jun  9 00:20:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:20:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:20:57 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 00:20:57 2013] Source does appear to be extended
[Sun Jun  9 00:20:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:21:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:21:37 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jun  9 00:21:37 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Sun Jun  9 00:21:37 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 7.25"
[Sun Jun  9 00:21:38 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jun  9 00:21:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src15.csv
[Sun Jun  9 00:21:38 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jun  9 00:21:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src15.csv
[Sun Jun  9 00:21:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jun  9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jun  9 00:21:40 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jun  9 00:22:37 2013] Warning, spatial fit 15 centroid is now closest to src. 57
[Sun Jun  9 00:22:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:22:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:22:37 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 00:22:37 2013] Source does appear to be extended
[Sun Jun  9 00:22:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 02:32:12 2013] XMMSAS src. selection expression = ellipse(34738.192200, 16349.531200, 434.958613, 434.958613, 0.000000, X, Y)
[Sun Jun  9 02:32:12 2013] Writing source region out to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src8_src.reg
[Sun Jun  9 02:32:12 2013] Extracting stamp from image fullrun_mos2_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (375, 163) - (425, 213)
[Sun Jun  9 02:32:12 2013] XMMSAS bgd. selection expression = annulus(34738.192200, 16349.531200, 724.931021, 1449.862042, X, Y)
[Sun Jun  9 02:32:12 2013] Writing fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src8.gif
[Sun Jun  9 02:37:26 2013] Mean detx,y = (-6280.71, -12279.92) 
[Sun Jun  9 02:37:29 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 02:37:41 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 02:37:42 2013] Setting source spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jun  9 02:37:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jun  9 05:22:17 2013] Updating aperture counts using extracted products
[Sun Jun  9 05:22:17 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 288.00
[Sun Jun  9 05:22:17 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src8_bgd.pi.gz = 266.00
[Sun Jun  9 05:22:17 2013] Got source and background scale factors 592000.000000, 4952632.000000
[Sun Jun  9 05:22:17 2013] User source parameters:
  Position = (399.8, 188.5) = 16 53 34.39 -41 58 59.8
  Extent = 7.2 (6.4-8.3)", rotation angle = 0
  Source aperture counts = 256.2 +/- 18.0
  Background aperture counts = 31.8
  Rate = 0.008 +/- 0.0005

[Sun Jun  9 05:22:40 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 05:22:40 2013] Using photon index=1.80, rate=0.00724, arf fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src8.arf
[Sun Jun  9 05:22:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 05:22:40 2013] Updating source flux to 3.1e-13
[Sun Jun  9 05:23:25 2013] xmm0109490601/analysis//spectral/fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete