[Sun Jun  9 00:18:38 2013] Detection parameters:
  Position = (304.4, 349.7) = 16 54 11.64 -41 47 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.1 +/- 12.4
  Background counts = 36.4
  Rate = 0.002 +/- 0.0004

[Sun Jun  9 00:18:40 2013] Off-axis axis estimate = 3.74'
[Sun Jun  9 00:19:53 2013] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:19:53 2013] Initial guess for spatial extent in simple fitting = 8.30"
[Sun Jun  9 00:19:53 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.078
[Sun Jun  9 00:19:53 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 8.30"
[Sun Jun  9 00:19:55 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src79.ximg exists
[Sun Jun  9 00:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src79.csv
[Sun Jun  9 00:19:55 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src79_1.ximg exists
[Sun Jun  9 00:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src79.csv
[Sun Jun  9 00:19:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:19:58 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Sun Jun  9 00:19:58 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Sun Jun  9 00:19:58 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Sun Jun  9 00:20:57 2013] Spatial fit model total counts = 442.645000, observed total counts = 403.000000
[Sun Jun  9 00:20:57 2013] Offset between fit and detection position for source 51 = 0.108589 pixels
[Sun Jun  9 00:20:57 2013] 399.813600 total counts/ 363.940000 bgd. counts: snr = 1.880443
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.108589 pixels
  Position = (304.3, 349.7) = 16 54 11.68 -41 47 18.7
  Extent = 3.4 (2.6-4.8)", rotation angle = 0
  Source counts = 35.9 +/- 20.0
  Background counts = 363.9
  Rate = 0.001 +/- 0.0006
[Sun Jun  9 00:20:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:20:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:20:57 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 00:20:57 2013] Source does appear to be extended
[Sun Jun  9 00:20:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:21:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:21:37 2013] Initial guess for spatial extent in simple fitting = 3.41"
[Sun Jun  9 00:21:37 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.367
[Sun Jun  9 00:21:37 2013] Giving source the simple spatial ID 74 for pass 1, mean size = 3.41"
[Sun Jun  9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src74.ximg exists
[Sun Jun  9 00:21:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src74.csv
[Sun Jun  9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src74_1.ximg exists
[Sun Jun  9 00:21:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src74.csv
[Sun Jun  9 00:21:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Sun Jun  9 00:21:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src74.csv
[Sun Jun  9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Sun Jun  9 00:21:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src74.csv
[Sun Jun  9 00:21:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:22:37 2013] Spatial fit model total counts = 446.426000, observed total counts = 386.000000
[Sun Jun  9 00:22:37 2013] Poor agreement between spatial fit and data for source 51
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 00:22:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:22:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:22:37 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 00:22:37 2013] Source does appear to be extended
[Sun Jun  9 00:22:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 02:32:14 2013] XMMSAS src. selection expression = ellipse(26422.873200, 30378.482000, 204.310206, 204.310206, 0.000000, X, Y)
[Sun Jun  9 02:32:14 2013] Writing source region out to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src51_src.reg
[Sun Jun  9 02:32:14 2013] Extracting stamp from image fullrun_mos2_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (293, 338) - (316, 361)
[Sun Jun  9 02:32:14 2013] XMMSAS bgd. selection expression = annulus(26422.873200, 30378.482000, 340.517010, 681.034020, X, Y) && !ellipse(27396.407745, 30661.363647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27203.437561, 31409.789856, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 02:32:14 2013] Writing fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src51.gif
[Sun Jun  9 02:58:47 2013] Mean detx,y = (98.36, 2728.97) 
[Sun Jun  9 02:58:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 02:58:57 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 02:58:57 2013] Setting source spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun Jun  9 02:58:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun Jun  9 05:00:01 2013] Not generating rmf since there are only 35 counts
[Sun Jun  9 05:00:01 2013] rmf not generated due to insufficient counts
[Sun Jun  9 05:22:33 2013] Updating aperture counts using extracted products
[Sun Jun  9 05:22:34 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 58.00
[Sun Jun  9 05:22:34 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src51_bgd.pi.gz = 130.00
[Sun Jun  9 05:22:34 2013] Got source and background scale factors 137600.000000, 716800.000000
[Sun Jun  9 05:22:34 2013] User source parameters:
  Position = (304.3, 349.7) = 16 54 11.68 -41 47 18.7
  Extent = 3.4 (2.6-4.8)", rotation angle = 0
  Source aperture counts = 33.0 +/- 8.7
  Background aperture counts = 25.0
  Rate = 0.001 +/- 0.0003

[Sun Jun  9 05:22:41 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 05:22:41 2013] Using photon index=1.80, rate=0.00109, arf fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src51.arf
[Sun Jun  9 05:22:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 05:22:41 2013] Updating source flux to 2.9e-14
[Sun Jun  9 05:23:06 2013] Flag p found in src. 51 procflags, skipping spectral fitting
[Sun Jun  9 05:23:06 2013] Source 51 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 05:23:25 2013] xmm0109490601/analysis//spectral/fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete