[Sun Jun 9 00:18:37 2013] Detection parameters: Position = (390.1, 427.8) = 16 53 38.35 -41 41 37.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 75.6 +/- 12.0 Background counts = 12.8 Rate = 0.002 +/- 0.0004 [Sun Jun 9 00:18:40 2013] Off-axis axis estimate = 11.50' [Sun Jun 9 00:19:53 2013] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:19:53 2013] Initial guess for spatial extent in simple fitting = 12.18" [Sun Jun 9 00:19:53 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.827 [Sun Jun 9 00:19:53 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 12.18" [Sun Jun 9 00:19:55 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src72.ximg exists [Sun Jun 9 00:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src72.csv [Sun Jun 9 00:19:55 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src72_1.ximg exists [Sun Jun 9 00:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src72.csv [Sun Jun 9 00:19:55 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src72_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:19:57 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src72.ximg exists [Sun Jun 9 00:19:57 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists [Sun Jun 9 00:19:57 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly [Sun Jun 9 00:20:57 2013] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 13.936905 pixels away [Sun Jun 9 00:20:57 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:20:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:20:57 2013] Assessing source extent using major [Sun Jun 9 00:20:57 2013] Source does appear to be extended [Sun Jun 9 00:20:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:20:57 2013] Source is confused with source 29 [Sun Jun 9 00:21:37 2013] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:21:37 2013] Initial guess for spatial extent in simple fitting = 12.18" [Sun Jun 9 00:21:37 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.827 [Sun Jun 9 00:21:37 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 12.18" [Sun Jun 9 00:21:39 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src68.ximg exists [Sun Jun 9 00:21:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src68.csv [Sun Jun 9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src68_1.ximg exists [Sun Jun 9 00:21:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src68.csv [Sun Jun 9 00:21:40 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src68_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src68.ximg exists [Sun Jun 9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists [Sun Jun 9 00:21:41 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly [Sun Jun 9 00:22:37 2013] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.916273 pixels away [Sun Jun 9 00:22:37 2013] Source 27 is offset by -6.096542 and -7.769072 pixels which is larger than 2 X fitted extent = 1.399660 x 1.399660, not incorporating fit results [Sun Jun 9 00:22:37 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:22:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:22:37 2013] Assessing source extent using major [Sun Jun 9 00:22:37 2013] Source does appear to be extended [Sun Jun 9 00:22:37 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 02:32:14 2013] XMMSAS src. selection expression = ellipse(33889.462433, 37172.586700, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 02:32:14 2013] Writing source region out to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src27_src.reg [Sun Jun 9 02:32:14 2013] Extracting stamp from image fullrun_mos2_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (353, 390) - (428, 465) [Sun Jun 9 02:32:14 2013] XMMSAS bgd. selection expression = annulus(33889.462433, 37172.586700, 1087.500000, 2175.000000, X, Y) && !ellipse(31310.424000, 36628.461000, 972.608028, 972.608028, 0.000000, X, Y) && !ellipse(29947.666000, 36992.100000, 1769.288051, 1769.288051, 0.000000, X, Y) && !ellipse(34277.476379, 36878.149261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34276.082489, 36188.038116, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 02:32:14 2013] Writing fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src27.gif [Sun Jun 9 02:56:58 2013] Mean detx,y = (-8249.49, 8417.19) [Sun Jun 9 02:57:01 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 02:57:13 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 02:57:13 2013] Setting source spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src27_src_b10.pi.gz [Sun Jun 9 02:57:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src27_bgd.pi.gz [Sun Jun 9 04:59:30 2013] Not generating rmf since there are only 75 counts [Sun Jun 9 04:59:30 2013] rmf not generated due to insufficient counts [Sun Jun 9 05:22:31 2013] Updating aperture counts using extracted products [Sun Jun 9 05:22:31 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 170.00 [Sun Jun 9 05:22:32 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src27_bgd.pi.gz = 455.00 [Sun Jun 9 05:22:32 2013] Got source and background scale factors 1337600.000000, 8697187.000000 [Sun Jun 9 05:22:32 2013] User source parameters: Position = (390.1, 427.8) = 16 53 38.35 -41 41 37.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 100.0 +/- 14.1 Background aperture counts = 70.0 Rate = 0.003 +/- 0.0004 [Sun Jun 9 05:22:32 2013] Updating counts from extracted products [Sun Jun 9 05:22:32 2013] Set source signif. to 100.02/8.37 = 11.96 [Sun Jun 9 05:22:41 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 05:22:41 2013] Using photon index=1.80, rate=0.00304, arf fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src27.arf [Sun Jun 9 05:22:41 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 05:22:41 2013] Updating source flux to 1.1e-13 [Sun Jun 9 05:23:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 05:23:25 2013] xmm0109490601/analysis//spectral/fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete