[Sun Jun  9 00:18:40 2013] Detection parameters:
  Position = (248.2, 223.0) = 16 54 33.54 -41 56 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.6 +/- 13.1
  Background counts = 13.7
  Rate = 0.005 +/- 0.0007

[Sun Jun  9 00:18:40 2013] Off-axis axis estimate = 6.57'
[Sun Jun  9 00:19:53 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:19:53 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sun Jun  9 00:19:53 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.205
[Sun Jun  9 00:19:53 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 9.71"
[Sun Jun  9 00:19:55 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun  9 00:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src31.csv
[Sun Jun  9 00:19:55 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun  9 00:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src31.csv
[Sun Jun  9 00:19:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:19:57 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun  9 00:19:57 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun  9 00:19:57 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Jun  9 00:20:57 2013] Spatial fit model total counts = 213.298000, observed total counts = 203.000000
[Sun Jun  9 00:20:57 2013] Offset between fit and detection position for source 111 = 0.425386 pixels
[Sun Jun  9 00:20:57 2013] 210.184800 total counts/ 129.307000 bgd. counts: snr = 7.112435
Spatial fit parameters:
  Offset between fit and detection position for source 111 = 0.425386 pixels
  Position = (247.8, 223.3) = 16 54 33.68 -41 56 28.8
  Extent = 7.5 (5.7-9.5)", rotation angle = 0
  Source counts = 80.9 +/- 14.5
  Background counts = 129.3
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 00:20:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:20:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:20:57 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 00:20:57 2013] Source does appear to be extended
[Sun Jun  9 00:20:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:21:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:21:37 2013] Initial guess for spatial extent in simple fitting = 7.53"
[Sun Jun  9 00:21:37 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.804
[Sun Jun  9 00:21:37 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 7.53"
[Sun Jun  9 00:21:39 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun  9 00:21:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src30.csv
[Sun Jun  9 00:21:39 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun  9 00:21:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src30.csv
[Sun Jun  9 00:21:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun  9 00:21:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sun Jun  9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun  9 00:21:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sun Jun  9 00:21:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:22:37 2013] Warning, spatial fit 30 centroid is now closest to src. 110
[Sun Jun  9 00:22:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:22:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:22:37 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 00:22:37 2013] Source does appear to be extended
[Sun Jun  9 00:22:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 02:32:12 2013] XMMSAS src. selection expression = ellipse(21512.753880, 19375.636200, 451.507609, 451.507609, 0.000000, X, Y)
[Sun Jun  9 02:32:12 2013] Writing source region out to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src111_src.reg
[Sun Jun  9 02:32:12 2013] Extracting stamp from image fullrun_mos2_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (222, 197) - (274, 249)
[Sun Jun  9 02:32:12 2013] XMMSAS bgd. selection expression = annulus(21512.753880, 19375.636200, 752.512682, 1505.025364, X, Y) && !ellipse(19197.698517, 19406.426300, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 02:32:12 2013] Writing fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src111.gif
[Sun Jun  9 02:43:51 2013] Mean detx,y = (6441.80, -7518.20) 
[Sun Jun  9 02:43:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 02:44:17 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 02:44:17 2013] Setting source spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Sun Jun  9 02:44:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src111_bgd.pi.gz
[Sun Jun  9 04:25:09 2013] Not generating rmf since there are only 80 counts
[Sun Jun  9 04:25:09 2013] rmf not generated due to insufficient counts
[Sun Jun  9 05:22:21 2013] Updating aperture counts using extracted products
[Sun Jun  9 05:22:21 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src111_src_b10.pi.gz = 126.00
[Sun Jun  9 05:22:21 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src111_bgd.pi.gz = 291.00
[Sun Jun  9 05:22:21 2013] Got source and background scale factors 640780.000000, 4347455.000000
[Sun Jun  9 05:22:21 2013] User source parameters:
  Position = (247.8, 223.3) = 16 54 33.68 -41 56 28.8
  Extent = 7.5 (5.7-9.5)", rotation angle = 0
  Source aperture counts = 83.1 +/- 12.3
  Background aperture counts = 42.9
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 05:22:40 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 05:22:40 2013] Using photon index=1.80, rate=0.00246, arf fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src111.arf
[Sun Jun  9 05:22:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 05:22:41 2013] Updating source flux to 8.2e-14
[Sun Jun  9 05:23:06 2013] Source 111 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 05:23:25 2013] xmm0109490601/analysis//spectral/fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src111_pl.csv not found, spectral fit skipped or did not complete