[Sun Jun 9 00:18:39 2013] Detection parameters: Position = (287.4, 255.2) = 16 54 18.25 -41 54 8.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 74.7 +/- 13.1 Background counts = 24.3 Rate = 0.003 +/- 0.0005 [Sun Jun 9 00:18:40 2013] Off-axis axis estimate = 3.23' [Sun Jun 9 00:19:53 2013] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:19:53 2013] Initial guess for spatial extent in simple fitting = 8.05" [Sun Jun 9 00:19:53 2013] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.132 [Sun Jun 9 00:19:53 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 8.05" [Sun Jun 9 00:19:55 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src55.ximg exists [Sun Jun 9 00:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src55.csv [Sun Jun 9 00:19:55 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src55_1.ximg exists [Sun Jun 9 00:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src55.csv [Sun Jun 9 00:19:55 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:19:57 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Sun Jun 9 00:19:57 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Sun Jun 9 00:19:57 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly [Sun Jun 9 00:20:57 2013] Spatial fit model total counts = 317.253000, observed total counts = 317.000000 [Sun Jun 9 00:20:57 2013] Offset between fit and detection position for source 105 = 0.244782 pixels [Sun Jun 9 00:20:57 2013] 316.739200 total counts/ 248.449000 bgd. counts: snr = 4.332512 Spatial fit parameters: Offset between fit and detection position for source 105 = 0.244782 pixels Position = (287.6, 255.3) = 16 54 18.16 -41 54 9.5 Extent = 8.0 (5.4-12.6)", rotation angle = 0 Source counts = 68.3 +/- 17.8 Background counts = 248.4 Rate = 0.002 +/- 0.0005 [Sun Jun 9 00:20:57 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:20:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:20:57 2013] Assessing source extent using major axis lower bound [Sun Jun 9 00:20:57 2013] Source does appear to be extended [Sun Jun 9 00:20:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:21:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Jun 9 00:21:37 2013] Initial guess for spatial extent in simple fitting = 8.03" [Sun Jun 9 00:21:37 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.137 [Sun Jun 9 00:21:37 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 8.03" [Sun Jun 9 00:21:39 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src54.ximg exists [Sun Jun 9 00:21:39 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src54_1.ximg exists [Sun Jun 9 00:21:39 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src54 appears to have run properly [Sun Jun 9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src54.ximg exists [Sun Jun 9 00:21:41 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists [Sun Jun 9 00:21:41 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly [Sun Jun 9 00:22:37 2013] Spatial fit model total counts = 325.625000, observed total counts = 326.000000 [Sun Jun 9 00:22:37 2013] Offset between fit and detection position for source 105 = 0.165028 pixels [Sun Jun 9 00:22:37 2013] 328.525300 total counts/ 264.180000 bgd. counts: snr = 3.958830 Spatial fit parameters: Offset between fit and detection position for source 105 = 0.165028 pixels Position = (287.5, 255.4) = 16 54 18.22 -41 54 9.2 Extent = 10.9 (6.4-16.1)" x 5.0 (2.7-8.8)", rotation angle = 30 (337-57) degrees Source counts = 64.3 +/- 18.1 Background counts = 264.2 Rate = 0.002 +/- 0.0006 [Sun Jun 9 00:22:37 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:22:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:22:37 2013] Assessing source extent using major axis lower bound [Sun Jun 9 00:22:37 2013] Source does appear to be extended [Sun Jun 9 00:22:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73 [Sun Jun 9 02:32:13 2013] XMMSAS src. selection expression = ellipse(24961.589800, 22169.680600, 651.420019, 298.380609, 30.393800, X, Y) [Sun Jun 9 02:32:13 2013] Writing source region out to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src105_src.reg [Sun Jun 9 02:32:13 2013] Extracting stamp from image fullrun_mos2_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (250, 218) - (325, 293) [Sun Jun 9 02:32:13 2013] XMMSAS bgd. selection expression = annulus(24961.589800, 22169.680600, 1085.700031, 2171.400062, X, Y) && !ellipse(23682.842163, 24239.139832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23269.251774, 21898.163800, 505.498415, 252.188807, 37.918300, X, Y) && !ellipse(23997.824219, 21237.022537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22280.053400, 22568.220400, 653.013619, 653.013619, 0.000000, X, Y) && !ellipse(25935.025600, 23513.203000, 630.411218, 630.411218, 0.000000, X, Y) && !ellipse(26903.120560, 24001.951800, 320.000009, 320.000009, 0.000000, X, Y) && !ellipse(23368.221744, 22632.814791, 587.387350, 529.321953, 319.537065, X, Y) && !ellipse(24607.827200, 24471.084860, 311.607209, 311.607209, 0.000000, X, Y) && !ellipse(27287.559509, 23601.542511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25774.706000, 25078.568000, 901.864026, 901.864026, 0.000000, X, Y) && !ellipse(24522.678375, 23653.551880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26452.037720, 24071.612793, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 02:32:13 2013] Writing fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src105.gif [Sun Jun 9 02:52:27 2013] Mean detx,y = (2640.58, -5227.30) [Sun Jun 9 02:52:29 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 02:52:53 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 02:52:54 2013] Setting source spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src105_src_b10.pi.gz [Sun Jun 9 02:52:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src105_bgd.pi.gz [Sun Jun 9 04:42:23 2013] Not generating rmf since there are only 64 counts [Sun Jun 9 04:42:23 2013] rmf not generated due to insufficient counts [Sun Jun 9 05:22:27 2013] Updating aperture counts using extracted products [Sun Jun 9 05:22:27 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src105_src_b10.pi.gz = 149.00 [Sun Jun 9 05:22:27 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src105_bgd.pi.gz = 460.00 [Sun Jun 9 05:22:27 2013] Got source and background scale factors 604464.000000, 4174181.000000 [Sun Jun 9 05:22:27 2013] User source parameters: Position = (287.5, 255.4) = 16 54 18.22 -41 54 9.2 Extent = 10.9 (6.4-16.1)" x 5.0 (2.7-8.8)", rotation angle = 30 (337-57) degrees Source aperture counts = 82.4 +/- 13.2 Background aperture counts = 66.6 Rate = 0.003 +/- 0.0004 [Sun Jun 9 05:22:41 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 05:22:41 2013] Using photon index=1.80, rate=0.00196, arf fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src105.arf [Sun Jun 9 05:22:41 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 05:22:41 2013] Updating source flux to 5.2e-14 [Sun Jun 9 05:23:06 2013] Source 105 has fewer than 100.000000 counts, skipping spectral fitting [Sun Jun 9 05:23:25 2013] xmm0109490601/analysis//spectral/fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src105_pl.csv not found, spectral fit skipped or did not complete