[Sun Jun  9 00:18:36 2013] Detection parameters:
  Position = (400.7, 389.3) = 16 53 34.22 -41 44 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.7 +/- 14.5
  Background counts = 10.8
  Rate = 0.007 +/- 0.0008

[Sun Jun  9 00:18:40 2013] Off-axis axis estimate = 9.91'
[Sun Jun  9 00:19:53 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:19:53 2013] Initial guess for spatial extent in simple fitting = 11.39"
[Sun Jun  9 00:19:53 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926
[Sun Jun  9 00:19:53 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 11.39"
[Sun Jun  9 00:19:54 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun  9 00:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src19.csv
[Sun Jun  9 00:19:54 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun  9 00:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src19.csv
[Sun Jun  9 00:19:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:19:56 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun  9 00:19:56 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun  9 00:19:56 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Jun  9 00:20:57 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.786606 pixels away
[Sun Jun  9 00:20:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:20:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:20:57 2013] Assessing source extent using major
[Sun Jun  9 00:20:57 2013] Source does appear to be extended
[Sun Jun  9 00:20:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:21:37 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:21:37 2013] Initial guess for spatial extent in simple fitting = 11.39"
[Sun Jun  9 00:21:37 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926
[Sun Jun  9 00:21:37 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.39"
[Sun Jun  9 00:21:38 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun  9 00:21:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src19.csv
[Sun Jun  9 00:21:38 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun  9 00:21:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src19.csv
[Sun Jun  9 00:21:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun  9 00:21:40 2013] fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun  9 00:21:40 2013] Fit fullrun_mos2_xmm0109490601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Jun  9 00:22:37 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.059247 pixels away
[Sun Jun  9 00:22:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:22:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:22:37 2013] Assessing source extent using major
[Sun Jun  9 00:22:37 2013] Source does appear to be extended
[Sun Jun  9 00:22:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 02:32:12 2013] XMMSAS src. selection expression = ellipse(34809.289368, 33817.269531, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 02:32:12 2013] Writing source region out to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun  9 02:32:12 2013] Extracting stamp from image fullrun_mos2_xmm0109490601_pi300-10000_cl_sm2.00.img.gz, (363, 352) - (438, 427)
[Sun Jun  9 02:32:12 2013] XMMSAS bgd. selection expression = annulus(34809.289368, 33817.269531, 1087.500000, 2175.000000, X, Y) && !ellipse(34276.082489, 36188.038116, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 02:32:12 2013] Writing fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src10.gif
[Sun Jun  9 02:39:05 2013] Mean detx,y = (-8648.45, 5050.34) 
[Sun Jun  9 02:39:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 02:39:34 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 02:39:34 2013] Setting source spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun  9 02:39:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun  9 04:12:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 04:12:08 2013] rmf not generated due to insufficient counts
[Sun Jun  9 05:22:18 2013] Updating aperture counts using extracted products
[Sun Jun  9 05:22:18 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 202.00
[Sun Jun  9 05:22:18 2013] Total counts from fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src10_bgd.pi.gz = 561.00
[Sun Jun  9 05:22:18 2013] Got source and background scale factors 1332800.000000, 9876755.000000
[Sun Jun  9 05:22:18 2013] User source parameters:
  Position = (400.7, 389.3) = 16 53 34.22 -41 44 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 126.3 +/- 15.2
  Background aperture counts = 75.7
  Rate = 0.004 +/- 0.0005

[Sun Jun  9 05:22:18 2013] Updating counts from extracted products
[Sun Jun  9 05:22:18 2013] Set source signif. to 126.30/8.70 = 14.52
[Sun Jun  9 05:22:40 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 05:22:40 2013] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src10.arf
[Sun Jun  9 05:22:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 05:22:40 2013] Updating source flux to 1.2e-13
[Sun Jun  9 05:23:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 05:23:25 2013] xmm0109490601/analysis//spectral/fullrun_mos2_xmm0109490601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete